DREAMLED RIML-300 Rechargeable LED Lamps User Manual

DREAMLED RIML-300 Rechargeable LED Lamps

PACKAGE CONTENTS

See illustration 1
The Dreamled®
RIML-300 set consists of:

• 3x Rechargeable Indoor Motion LED Lights
• 4x Magnetic mounting plates
• 1x USB charging cable

CHARGING THE RIML-300

Insert one side of the USB charging cable into a power source such as a USB home charger, laptop, computer, powerbank, … and connect the other side of the cable with the RIML-300. Charging time when using USB cable + PC/laptop is about 3 hours. Charging time using USB cable + USB travel charger (not included) is about 1.5 hours. When charging, the red LED indicator will light up. When the battery is fully charged the LED indicator will turn off. Max. operation time is up to 10 hours in ON position. In AUTO position, time depends on use, location and intensity, usually it is up to a few weeks.
Note: We recommend using the original charging cable of your device (supplied by Dreamled®) for optimal charging. INSTALLATION

The RIML-300 LED lights can be used anywhere and any place in your home when you need some extra light, such as closets, attics, cabins, basements, etc. The RIML-300 LED lights can be installed in various positions: on a horizontal or vertical surface or upside down. Make sure to mount the lights on a stable, solid supporting surface.
See illustration 2
To mount the LED lights, remove the protection strip of the magnetic plate and stick it onto the desired location. Place the indicated area on the backside of the light against the metal side of the magnetic mounting plate. Your light is now be fixed. To charge the light, you can easily take it from the metal plate.
Note: If you want to place the light on a horizontal surface, you can place the magnetic plate a bit lower than the designated area so that it works like a support for keeping the light in a standing position.
MOTION / LIGHT SENSOR
See illustration 3
You can set the lamp in 3 various positions: AUTO – ON – OFF.

1. Turn ON the lamp by setting the switch in the “AUTO” position. When set in this mode, the lamp will ONLY work when motion is detected & the environment/location is dark.
2. In the “OFF” position, the lamp is turned OFF and will not be activated in case of movement.
3. In the “ON” position, the lamp is turned ON all the time. This way, you can use the lamp as a flashlight.

CLEANING
Make sure the motion sensor is kept dust free and clean. Clean it regularly (1x per month) with a dry cloth and with warm, soapy water. A dirty motion sensor may not work properly. This can lead to premature aging of the battery and may result in unreliable operation of the device.

TROUBLESHOOTING

Problem 1: Light does not turn on if something or someone moves into the detection range. Possible solution: Make sure that:

• The device is recharged.
• The motion sensor is free and clean, and in “AUTO” position.
• It is dark or the surroundings are dark enough to activate the sensor.

Problem 2: Light flashes or low light. Possible solution:

• Weak battery. Recharge the battery.

SAFETY INSTRUCTIONS

• Never place the device in the vicinity of excessive heat or cold sources. Extreme temperatures have a negative influence on the life of electronics and batteries.
• Never touch the plug contacts with sharp or metal objects.
• Use only the original power supply and original accessories.
• Protect the device from special liquids and vapors.
• Turn off the unit before cleaning. Do not use any solvent based cleaning agents, only a soft, dry anti-static cloth.
• Do not attempt repairs yourself.
• If the unit is not properly installed or operated Dreamled® cannot accept liability.

TECHNICAL DATA

DISPOSAL
Dispose of electronic devices in an eco-friendly fashion! Electronic devices do not belong in your household waste. Compliant with the European Guidelines for electric and electronic devices, used electronic devices must be collected separately and taken in for environmentally sound recycling. Options for disposing of used devices may be obtained from your township, city or municipal government. Incorrect disposal of batteries rechargeable batteries can harm the environment! They can contain poisonous heavy metals and are subject to treatment as hazardous wastes. Take your used batteries to a municipal collection site.
SUPPORT
For more information, technical questions and return requests concerning this product,
you should contact support@dream-led.eu.
GUARANTEE
Copyright © Dreamled® . Dreamled® is a registered trademark of TE-Group NV. The Dreamled® brand stands for superior product quality and outstanding customer service. That is why Dreamled® warrants this product against all defects in material and workmanship for a period of two (2) years from the date of original purchase of the product. The terms of this guarantee and the extent of responsibility of Dreamled® under this warranty can be downloaded from the website: www.dream-led.eu.

DECLARATION OF CONFORMITY

Conformity is guaranteed by the CE symbol. The full text of the EU declaration of conformity is available at the following internet
address: http://www.dream-led.be/doc_riml-300.

References

• For Sale - Safenames Domain
• dream-led.eu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>