SANWA GMADW7 Ergonomic Mouse User Manual

Ergonomic Mouse
Manual
Wireless Mouse
GMADW7 FCC ID : 2AMSUDW7
GMADW8 FCC ID : 2AMSUDW8

Opening

Thank you for purchasing this Ergonomic mouse.

Caution

• The company is not liable for any damages, such as live motion defects, data loss, etc., caused by using this product or software.
• This product is intended for use in general workplaces and homes. The company does not assume responsibility in the event of damages caused by using in any other places.
• Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required.
• Refrain from using directly or indirectly with equipment and computer systems in which a high level of safety and responsibility are required.
• Do not use this product on airplanes as it may interfere with the airplane communication system.
• Please consult your doctor before using this product if you use a pacemaker or other medical device.

Warnings Regarding Health

Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in hands, arms, neck, shoulders, etc. Serious damage may be incurred if such use is repeated. If you feel pain or numbness while operating the mouse or keyboard, stop using it immediately and consult a doctor if necessary. Take regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc.

Specifications

Wireless
System| 2.4GHz RF Radio wave system
The ID between the mouse and the receiver is fixed.
Communication
Range| Wooden desk (nonmagnetic material) / approx. radius
10m,Steel desk (magnetic material) / approx. radius 2m
The radio wave transmission range varies depending
on the usage environment.
Resolution| 800.1200.1600 DPI
Red LED flashes once:800DPI
Red LED flashes twice:1200DPI
Red LED flashes 3 times: 1600DPI
Reatdho d ing
Me| Optical sensor system (Blue LED)
Buttons| 2 buttons, 2 side buttons, count switch button, connection
switch button, wheel button (scroll)
Size/Weight| W85 x D122.5 x H43<57.5>mm.approx.92.5<108.5>g <>for GMADW8 W14.5<12.8> x D18.4<21> x H5.8<5.5>mmiapprox.1.75<1.1>g <>for Type-C receiver
---|---
Battery Performance| Continuous operating time: 2.4G/approx.53 hours, Continuous standby time: approx.660 days, Usable days: approx.67 days Based on 8 hours of computer work per day, with 5% mouse operation. (When fully charged) The time is based on the use of alkaline batteries.Time may vary depending on the environment (temperature, battery performance). The data are the internal test results of the company, and the actual usage time shall be subject to the product received. *Note that battery performance will gradually deteriorate over time.

Compatible Models

Windows (DOSN) PC / tablet, Apple Mac series, Chrome OS PC, Android smartphone / tablet, iPad OS The side buttons cannot be used for the Mac series.
<2.4GHz wireless (using USB A receiver)> Models with a standard USB A port.
<2.4GHz wireless (using Type-C receiver)> *Models with a standard USB Type-C port.

Name of Parts

1. Left button / Right button

2. Wheel button (scroll button)

3. Count switch button

4. Count switch (charging) LED

5. Back / Forward button (Windows only)
   *Not available for Mac series.
   

6. Charging port

7. Connection switch button

8. 2.4GHz (USB A) mode LED

9. 2.4GHz (Type-C) mode LED

10. Blue LED

11. Receiver storage slot

12. Power switch

13. USB A receiver

14. Type-C receiver

15. Power cable

Charging Method

Please make sure the battery is charged before using it for the first time.

1. Connect the mouse with the included charging cable.
2. Count switch (charging) LED: When the mouse is connected to the charging cable for charging, the LED lights up red, and the LED lights up green when charging is completed, please disconnect the charging cable. Be sure to use the included charging cable for charging. Charging time is about 3 hours.

Connection with Mouse

<How to connect to 2.4GHz wireless devices>
*Note: It is recommended to close all other applications before connecting the mouse.

1. Switch on the mouse, press the pairing / connection button to switch to 2.4GHz wireless (USB A) mode or 2.4GHz wireless (Type-C) mode. 8 Channel A LED blinks slowly: the mouse enters 2.4GHz wireless (USB A) mode; Channel C LED blinks slowly: the mouse enters 2.4GHz wireless (Type-C) mode.
2. Power on the computer and start the operating system.
3. 0pen the receiver storage slot, remove the corresponding receiver and then insert the receiver into the corresponding port of the device.
4. Hardware detection starts automatically, and a wizard for updating the device driver will start up. (Installation is completed automatically in Mac environment)

• Sleep Mode
If the mouse is not operated for a certain period of time even when the power switch is ON, the mouse will enter the sleep mode. The mouse will recover from the sleep mode by clicking or operating the mouse. The operation may become unstable immediately after recovery.

How to Store the Receiver

Insert the receiver into the receiver storage slot on the back of the mouse.

Multi-pairing Setting Method

Multi-device pairing can support 2 devices (1 device connected in 2.4GHz wireless (USB A) mode, and 1 device connected in 2.4GHz wireless (Type-C) mode) and switch the connection.

1. Switch on the mouse, the current mode LED light will blink slowly 6-7 times.
2. See step 8 “Connection with Mouse” to complete the connection pairing of related devices respectively, each channel corresponds to one device.
3. Press the pairing / connection button to switch to the appropriate channel to select the device.

Customize Buttons (Windows only)

Once you download the driver software from the website, you can use the button programming function. To use custom keystrokes, you need to keep the software enabled.

1. “https://www.sanwa.com/download/mu.exe” Please access. The download will start as soon as you access it.
2. Save and open the file.
3. Please follow the installation wizard to install the driver. eln the process of installation or use of any problem, please contact us. You can also refer to this documen ” https://www.sanwa.com/download/mu.pdf “

Troubleshooting

Q.The mouse (mouse cursor) doesn’t move.

– A. 1. Make sure that the mouse’s power has not been switched to OFF.
2. The battery may be low, please try to charge it.

Q.If the mouse is not moved for some time, it takes a few moments to start up. The mouse (mouse cursor) doesn’t move.

– A.If the product is not moved for some time, it enters sleep mode to conserve the battery. Pressing the button on the mouse will restore movement, but it will take a few seconds.

Q.The mouse cursor does not move smoothly.

– A. The Blue LED sensor is a very high performance sensor, but the cursor may not move smoothly on materials that reflect light, such as mirrors, or on transparent materials, such as glass. Also, the tracking performance may be degraded on regular patterns.
Problems specific to Mac

Q.The up and down scrolling is reversed on Mac.

– A.Please try the following method.
1. Select Apple menu→System Preferences-‘Mouse.
2. Uncheck the “Scroll Direction: Natural” checkbox.

 Warranty Term

1 year

Inquiries

EN : support-en@sanwa.com

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

|
---|---
https://m.facebook.com/sanwago/services/?ref=page_internal&refsrc=deprecated#| https://m.youtube.com/channel/UC0gORTX7KLqGwcHhPYvR7Xg/featured?view_as=subscriber

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>