STEiNEL IS 2360 ECO Motion Detectors Instruction Manual

: June 9, 2024
: STEINEL

Table of Contents

IS 2360 ECO Motion Detectors
Safety precautions
Installation
Principle
System Components
Technical Specifications
Disposal
Manufacturer’s warranty
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

IS 2360 ECO Motion Detectors
Instruction Manual

STEiNEL IS 2360 ECO Motion Detectors

IS 2360 ECO Motion Detectors

STEiNEL IS 2360 ECO Motion Detectors - 1

STEiNEL IS 2360 ECO Motion Detectors - 2

Translation of the original operating instructions

Safety precautions

During installation, the electrical wiring you are connecting must be dead. Therefore, switch off the power first and use a voltage tester to make sure the wiring is off circuit.
Installing this unit involves work on the mains voltage supply. This work must therefore be carried out by a qualified electrician in accordance with applicable national wiring regulations and electrical operating conditions (e.g. DE-VDE 0100, AT-ÖVE-ÖNORM E8001-1, CH-SEV 1000).
Only use genuine replacement parts.
Do not dismantle the unit yourself. It must only be repaired by a specialist workshop.

Installation

The IS 2360 ECO is a sensor for mounting on indoor and outdoor ceilings.

L = live conductor (usually black, brown or grey)
N = neutral conductor (usually blue)
PE = any protective earth conductor (green/yellow)
Note: Loop the protectiveearth conductor through if necessary. A mains power switch for turning the unit ON and OFF may of course be installed in the mains supply lead.
Important: Reversing the connections may result in damage to the unit.
If ncecessary, the conden- sation water drainage hole g must be drilled open with a 5 mm drill bit.

Principle

Movement triggers lights, alarms and many other devic- es. For your convenience, safety and peace of mind. The integrated pyroelectric infrared detector senses the invisible
heat radiated from moving objects (people, animals, etc.). The heat detected in this way is converted electronically into a signal that switches ON the connected load. Heat is not detected through obstacles, such as walls or panes of glass, and will therefore not activate the light.

System Components

W all mount
Load module with lens
Designer trim
Sealing plug
Light-level setting
Time setting
Condensation water drainage hole
(i)Concealed wiring
(ii)Surface wiring

Functions 5 – 6

STEiNEL IS 2360 ECO Motion Detectors - 3

Light-level setting 5
(Factory setting: daylight operation 2000 lux)
The sensor’s response threshold can be infinitely varied from 2 – 2000 lux.
Control dial set to = daylight operation approx. 2000 lux.
Control dial set to = twilight operation approx. 2 lux.

Time setting 6
(Factory setting: 8 sec.)
Light ON duration can be infinitely varied from 8 sec. to 35 min.
Control dial set to – = shortest time (8 sec.)
Control dial set to + = longest time (35 min.)

Technical Specifications

Dimensions: (0 x H):	115 x 50.5 mm
Output:	Incandescent / halogen lamp load

Fluorescent lamps, electronic ballast
Fluorescent lamps, uncorrected
Fluorescent lamps, series-corrected
Fluorescent lamps, parallel-corrected
Low-voltage halogen lamps
LED < 2 W
2 W < LED < 8 W
LED > 8 W
Capacitive load| 2000 W
1500 W
500 VA
500 VA
500 VA
1000 VA
16W
64W
64W
132 pF
Power supply:| 220-240 V, 50/60 Hz
Angle of coverage:| 360° with 180° angle of aperture
Reach:| 3.5 m max. tangentially / 2 m max. radially
Time setting:| 8 sec. – 35 min.
Light-level setting:| 2-2000 lux
IP rating:| IP 54
Temperature range:| -20 °C to +50 °C

Disposal

Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible manner.
**** Do not dispose of electrical and electronic equipment as domestic waste.
EU countries only: Under the current European Directive on Waste Electrical and Electronic Equipment and its implementation in national law, electrical and electronic equipment no longer suitable for use must be collected separately and recycled in an environmentally compatible manner.

Manufacturer’s warranty

As purchaser, you are entitled to your statutory rights against the vendor. If these rights exist in your country, they are neither curtailed nor restricted by our Warranty Declaration. We guarantee that your STEINEL Professional sensor product will remain in perfect condition and proper working order for a period of 5 years. We guarantee that this product is free from material-, manufacturing- and design flaws. In addition, we guarantee that all electronic components and cables function in the proper manner and that all materials used and their surfaces are without defects.
Making Claims
If you wish to make a claim, please send your product complete and carriage paid with the original receipt of purchase, which must show the date of purchase and product designation, either to your retailer or contact us at STEINEL (UK) Limited, 25 Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for a returns number. For this reason, we recommend that you keep your receipt of purchase in a safe place until the warranty period expires. STEINEL shall assume no liability for the costs or risks involved in returning a product.
For information on making claims under the terms of the warranty, please go to www.steinel-professional.de/garantie
If you have a warranty claim or would like to ask any question regarding your product, you are welcome to call us at any time on our Service Hotline 01733 366700.

Troubleshooting

Malfunction	Cause	Remedy
Without power	■ Fuse faulty, not switched ON
■ Short-circuit	■ Replace fuse, turn ON mains switch, check lead with voltage

tester
■ Check connections
Does not switch ON| ■ Twilight setting in night-time mode during daytime operation
■ Bulb faulty
■ Mains switch OFF
■ Fuse faulty| ■ Readjust
■ Replace light bulbs
■ Switch ON
■ Fit new fuse, check connection if necessary
Does not switch OFF| ■ Continuous movement in the detection zone
■ Light being operated is located in detection zone and keeps switching ON as a result of temperature change
■ Set to continuous opera- tion by indoor two-circuit single interruption switch
■ Position Wi-Fi device very
close to the sensor| ■ Check zone
■ Check zone
■ Set two-circuit single interruption switch to automatic operation
■ Increase distance between Wi-Fi device and sensor
Keeps switching ON/OFF| ■ Light being operated is located in detection zone
■ Animals moving in the detection zone| ■ Check zone
■ Check zone
Switches ON when it should not| ■ Wind is moving trees and bushes in the detection zone
■ Cars in the street are being detected
■ Sudden temperature changes due to weather (wind, rain, snow) or air expelled from fans, open windows
■ Position Wi-Fi device very close to the sensor| ■ Check zone
■ Check zone
■ Change detection zone, change site of installation
■ Increase distance between Wi-Fi device and sensor

STEINEL Vertrieb GmbH
Dieselstraße 80-84
33442 Herzebrock-Clarholz
Tel: +49/5245/448-188
www.steinel.de
110072310 07/2019_A T echnische Änderungen vorbehalten.
Subject to technical modification without notice.
000000000 07/2013 Technische Änderungen vorbehalten.
Contact
www.steinel.de/contact STEiNEL IS 2360
ECO Motion Detectors - qr code