MEMPHIS VG0890 Pro Cart ITC3 Grill Instruction Manual
- June 9, 2024
- MEMPHIS
Table of Contents
MEMPHIS VG0890 Pro Cart ITC3 Grill
Memphis Pro Cart ITC 3®
IntelliBurn Technology
Model Number VG0001S
Read all instructions before installing and using this appliance. Save these
instructions for future reference
A MAJOR CAUSE OF FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF UTMOST IMPORTANCE THAT THIS PRODUCT BE INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.
Warranty Registration
Stop!
Scan the QR Code above now
to secure your grill warranty registration.
Or register online at: https://memphisgrills.com/support-resources
/warranty-registration/
Clearance to Combustible Materials
Combustible Material is wood, dry wall, siding or any other material that has
to ability to catch fire. 
Below are some guidelines to ensure safe operation of your Memphis Grill
- The grill is to be supported by the casters provided.
- Grill casters are to be locked while the grill is in use or while the grill is hot.
- It is recommended that the grill be placed on a non-combustible surface.
- Operating the grill under a combustible ceiling or overhang is NOT recommended.
- Maintain the minimum clearance to combustible materials specified above.
Grill Dimensions
- Grill Height with Hood Open– 65.2 in. [166 cm]
- Grill Width with Slides Shelves Open– 79.5 in. [202 cm]
Memphis Control Diagram
| Part Number | Name | Description |
|---|---|---|
| VG1966 | Auger Wiring Harness | 5 pin connector from auger motor to the logic |
board
VG1967| Blower Wiring Harness| 4 pin connector from blower to the logic board
VG1968| Display Wiring Harness| 9 pin connector from the LCD display to the
logic board
VG0913(E)| US Power Cable (Euro)| Power cable that plugs into 120VAC (US) or
240VAC (EU) wall outlet
VG1970| IO Wiring Harness| 8 pin connector from IO board to the logic board
VG1971| Probe Jack Wiring Harness| 2 pin connector from meat probe jack to the
IO board
VG1972| Push Button Wiring Harness| 4 pin connector from push button in the
Display Housing to the IO board
VG1973| 5V Wiring Harness| 4 pin connector from power supply board to the
logic board
VG1975| Igniter Wiring Harness| 2 pin connector from igniter to the logic
board
VG1976| Auxiliary Fan Wiring Harness| 2 pin connector from Aux fan to logic
board
VG1977| RTD Wiring Harness| 2 Pin connector from RTD to the logic board.
Connection to board is non-polarized
VG1978| 24V Wiring Harness| 2 pin connector from power supply to logic board.
Provides power to blower, aux fan, auger motor, cook lights and LCD
VG1979| Cook Light Wiring Harness| 2 pin connector from cook lights to logic
board
VG9012| Wifi Jack| Single conductor jack installed in right panel connected to
the logic board
VG0326| Logic Board| Controls components related to smoking and cooking
VG0327| IO Board| Controls push button and meat probe jacks
VG0328| Power Supply Board| Provides 24V DC and 5V DC power
| Part Number | Name | Description |
|---|---|---|
| VG9501 | Auger Motor | This component rotates the auger to supply fuel into the |
burn pot
VG1967| Blower| This component pulls air from the lower cabinet and into the
firebox for combustion
VG1968| LCD Wiring Harness| Used to display Grill information and change grill
settings
VG0913(E)| US Power Cable (Euro)| Power cable that plugs into 120VAC (US) or
240VAC (EU) wall outlet
VG1971| Probe Jack| This component is used to plug probes for monitoring meat
temperature
VG1972| Push Button| This component is used to set the grill to cooldown,
reset the controller, or put the display to sleep
VG1975| Igniter| This component provide the initial heat during startup
VG1976| Auxiliary Fan| This component supplies cooling for the power supply
and logic boards
VG1977| RTD| This component is used by the controller to determine the cook
chamber temperature
VG1980| Cook Lights| These components are mounted inside the cook chamber to
provide light to the cook area
VG9012| WiFi Jack| Single conductor jack install in right panel connected to
the logic board
VG9023| WiFi Antenna| 2.4GHz WiFi antenna
Memphis Fuse Diagram
Power Cable (VG1969) Fuse
- VG9021– Fuse Glass 250VAC 5A 5 x 20 mm
Logic Board Layout
Documents / Resources
|
MEMPHIS VG0890 Pro Cart ITC3
Grill
[pdf] Instruction Manual
VG0890 Pro Cart ITC3 Grill, VG0890, Pro Cart ITC3 Grill, Grill
---|---