HAGOR 1987 BrackIT XL HD Installation Guide
- June 9, 2024
- HAGOR
Table of Contents
Installation sanleitung
BrackIT® XL HD | Art.-Nr.: 1987
Installation manual
1987 BrackIT XL HD
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can
cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the
special conditions at the installation site. Please check this in advance and
replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
Scope of delivery
Installation to a wood stud wall
2b Installation to a concrete wall
Installation of the VESA mount (flat back)
3b Installation of the VESA mount (irregular back)
Hanging the screen
Tilt adjustment
Attention! By default the stiffness of the tilt function is deliberately set high. If a lighter setting is desired, loose the screws by using an allen key at the marked position.
Cable management
| 
---|---
Adjustments
| | 
---|---|---
Dimensions
HAGOR Products GmbH
Oberbecksener Straße 97
D-32547 Bad Oeynhausen
Telefon: +49(0)57 31-7 55 07-0
Mail: hagor@hagor.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>