ZIEGER 10005243 Crash Bar Kit Instruction Manual
- June 9, 2024
- ZIEGER
Table of Contents
ZIEGER 10005243 Crash Bar Kit
crashbar kit
ATTENTION
For your own safty we recommend having installation and/ or servicing
carried out by a specialist workshop. We assumes no liability for damage
caused by improper installation and/ or maintenance work. No torque
specifications: Use the torque defined by vehicle manufacturer! The standard
torque in this table can be used as long as it is within the vehicle
manufacturer´s specifications
8.8| / coarse thread| M4| M5| M6| M8| M10| M12|
10.9| / coarse thread| M4| M5| M6| M8| M10| M12
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
/ torque| 2,8| 5,5| 9,6| 23| 46| 79| / torque| 4,1|
8,1| 14| 34| 67| 115
Thank you for choosing this quality product from IBEX! The assembly and/or maintenance of this product requires a good technical understanding. For your own safety, we recommend that the assembly and/or maintenance is carried out by a specialist workshop. Our company assumes no liability for any damage caused by improper assembly or maintenance. Be sure to keep in mind all the notes provided in the assembly instructions. Please also note all the instructions relevant to the assembly in the vehicle manual. Nonobservance can cause damage to the vehicle or danger to the driver! Please keep the assembly instructions as a reference.
Legende
General Notes
Observe any country-specific regulations by the legislature or homologation regulations.
Preparation
Read the assembly instructions carefully and make sure all parts of the list are available. Make sure that your vehicle stands safely and can´t fall over. Turn offthe engine and pull the ignition key. If necessary, allow the engine/exhaust to cool down. When working on the electrics disconnect the vehicle battery. Be sure to use only suitable tools. If necessary get help with the assembly work by a second person.
Assembling
According to vehicle manufacturers specification all demounted parts and connections must be reassembled or replaced by the parts and connections supplied by our company. If not stated different secure all threads with a medium-strong liquid screw protection. If not stated different by the vehiclemanufacturer or our company, all bolts and nuts must be tightened according to A4/ISO. After assembly, make sure that all previously demounted parts and connections have been properly remounted.
Funktion Check
After assembly, pay attention to the absolute freedom of movement and proper function of all vehicle parts. Cables, trains and hoses must not scrub or be clamped. Do a comprehensive functional check before the start of your journey. After 100 km please check the proper tightness of all parts and connections demounted during assembly
OVERVIEW
(Pos.No.)| / (drawing number)| / (description)| /
(quantity)| [Nm]| / (special features)
---|---|---|---|---|---
1| 1568_1_19| | crashbar compl.| 1| |
2| 1568_2_20| | crashbar compl.| 1| |
3| 1568_0_21| | mounting kit| 1| |
3.1| 785_0_18| | spacer| 1| |
3.2| 730_10| | spacer| 1| |
3.3| DIN ISO 912 M10x1.25 x 70| | hexagon socket screw| 1| 46|
3.4| DIN ISO 912 M10x1.25 x 55| | hexagon socket screw| 1| 46|
3.5| DIN 125 – A 10.5| | washer| 2| |
3.6| DIN ISO 912 M12x1.25 x 90| | hexagon socket screw| 1| 80|
3.7| DIN 913 – M8 x 8| | pin screw| 2| 19|
3.8| DIN ISO 912 M12x1.25 x 75| | hexagon socket screw| 1| 80|
3.9| SR1530| | stopper| 4| |
3.10| DIN 125 – A 13| | washer| 2| |
INSTALLATION INSTRUCTIONS
Copyright by:
IBEX GmbH Sosaer Straße 35 01257 Dresden
Errors and changes expected. Subject to technical and design changes.
- Email : info@ibex-parts.de
- Tel.: 0351/ 27278100
- Fax : 0351/ 27278101