ZIEGER 10008314 Engine Crash Bar Kit Instruction Manual

June 8, 2024
ZIEGER

0008314 Engine Crash Bar Kit
Mounting Instruction

10008314 Engine Crash Bar Kit

RAL Farbton: Artikelnummer:
Color: Item No.:

9005
(jet black)| 10008314
9006
(white aluminium)| 10008315

Rev.: Ausgabedatum:
Date of issue: ./. 09.06.2021

engine crashbar kit
max. load
k.E. kg (n.R. lbs)
max. speed
k.E. km/h (n.R. mp/h)

Attention

**** Cornering and ground clearance can be reduced by using this product! For your own safty we recommend having installation and/ or servicing carried out by a specialist workshop. We assumes no liability for damage caused by improper installation and/ or maintenance work.
No torque specifications: Use the torque defined by vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer´s specifications.

ZIEGER 10008347 Crash Bar Kit - icon 4

Thank you for choosing this quality product from IBEX!

The assembly and/or maintenance of this product requires a good technical understanding. For your own safety, we recommend that the assembly and/or maintenance is carried out by a specialist workshop. Our company assumes no liability for any damage caused by improper assembly or maintenance. Be sure to keep in mind all the notes provided in the assembly instructions. Please also note all the instructions relevant to the assembly in the vehicle manual. Nonobservance can cause damage to the vehicle or  danger to the driver! Please keep the assembly instructions as a reference.

General Notes:
Observe any country-specific regulations by the legislature or homologation regulations.

Preparation:
Read the assembly instructions carefully and make sure all parts of the list are available. Make sure that your vehicle stands safely and can´t fall over. Turn off the engine and pull the ignition key. If necessary, allow the engine/exhaust to cool down. When working on the electrics disconnect the vehicle battery. Be sure to use only suitable tools. If necessary get help with the assembly work by a second person.

Assembling:
According to vehicle manufacturers specification all demounted parts and connections must be reassembled or replaced by the parts and connections supplied by our company. If not stated different secure all threads with a medium-strong liquid screw protection. If not stated different by the vehicle manufacturer or our company, all bolts and nuts must be tightened according to A4/ISO. After assembly, make sure that all previously demounted parts and connections have been properly remounted.

Funktion Check:
After assembly, pay attention to the absolute freedom of movement and proper function of all vehicle parts. Cables, trains and hoses must not scrub or be clamped. Do a comprehensive functional check before the start of your journey. After 100 km please check the proper tightness of all parts and connections demounted during assembly.

ZIEGER 10008347 Crash Bar Kit - Fig 1| | |
---|---|---|---
Ansicht von links in Fahrtrichtung (left side)| Ansicht von rechts in Fahrtrichtung (right side)| Positionsnummer & Anzugsmoment
(position number and torque)| Schraubensicherung verwenden
(use screw lock)

ZIEGER 10008314 Engine Crash Bar Kit - Fig 1

(Pos.No.)| (drawing number)| description| (quaintly)| (NM)| (special features)
---|---|---|---|---|---
1| 2090119| croshbarcompl. (right side)| 1| |
2| 2090220| croshbor compl. (left side)| 1| |
3| 2090021| mounting kit| 1| |
3.1| DIN 125 – A 103| washer| 8| |
3.2| 819_0_17| spacer| 1| |
3.3| 1140_0_11| spacer| 1| |
3.4| 2090_2_1 I| bracket| 1| |
3.5| 2090_1_16| bracket| 1| |
3.6| 1969_0_32| spacer| 4| |
3.7| 744_1J| spacer| 4| |
3.8| DIN ISO 912 M10x1.25 x 45| hexagon socket screw| 4| 46| metrts Feingewin ches de
3.9| DIN ISO 912 M10 x 30| hexagon socket SreW| 2| 47|
3.10| DIN 150912 M12x1.25 x 110| hexagon socket screw| 1| 80| Metrtsches Feingewinde
3.11| DIN ISO 912 M12(1.25 x 100| hexagon socket screw| 1| 80| Metrtsches Feingewinde
3.12| 5R1530| stopper| 4| |
3.13| DIN 913 -M8x8| pin screw| 2| 19|
3.14| 2090_0_22| distance plate| 1| |
3.15| DIN ISO 912 M10x1.25 x 40| hexagon socket screw| 2| 46| meinsches Feingewnde

Copyright by:
IBEX GmbH Sosaer Straße 35 01257 Dresden
Errors and changes expected. Subject to technical and design changes.
Datum der Konfektionierung: (packaging date)

Email: info@ibex-parts.de
Tel.: 0351/ 27278100
Fax: 0351/ 27278101

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals