anko 43233380 True Wireless Earbuds Instruction Manual
- June 9, 2024
- Anko
Table of Contents
anko 43233380 True Wireless Earbuds
INSTRUCTION MANUAL
- 43233380 BLACK [KMTO88 43233380 MAN_True Wireless Buds with Battery Level_v1
- Artwork Proof Date: 07.11.2022
PAPER
- 80gsm
- Bright white uncoated paper
PRINT COLOURS
CHANGE LOG CREST INTERNAL USE ONLY
ARTWORK SHOULD NOT BE AMENDED WITHOUT PRIOR AGREEMENT FROM CREST ALL ARTWORK MUSI BE APPROVED BY CREST PRIOR TO MASS PR0DUCTION. IF THERE ARE QUERIES ABOUT THIS ARTWORK PLEASE CONTACT: EMAIL: design@crest.com.au THANK-YOU.
12 month warranty
Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new
product to be free from defects in materials and workmanship for the period
stated above, from the date of purchase., provided that the product is used in
accordance with the accompanying recommendations or instructions where
provided. This warranty is in addition to your rights under the Australian
Consumer Law Kmart will provide you with your choice of a refund, repair or
exchange (where possible) for this product if it becomes defective within the
warranty period. Kmart will bear the reasonable expense of claiming the
Warranty. This warranty will no longer opply here the defect is a result of
alteration, accident, misuse, abuse or neglect. Please retain your receipt as
proof of purchase and contact our Customer Service Centre on 1800 124 125
(Australia) or 0800 945 995 (New Zeadand) or altenatively. via Customer Help
at kmart.com.au for any difficulties with your product. Warranty claims and
claims for expense incured in returning this product can be addressed to our
Customer Service Centre at 690 Springvale Rd, Mulgrave VIC 3170.Our goods come
with guarantees that cannot be excluded under the Australian Consumer Law. You
are entitled toa replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure For New Zealand
customers. this warranty is in addition to statutory rights observed under New
Zealand legislation.
Note: Please remove insulation film from the charging terminals and
charae the earphones and case before uSe
Includes
- charging case, earbuds
- USB-C charging cable
- small, medium & large replacement eartips
CAUTION
The batteries in this product are not replaceable. During use, storage or transportotion the battery shoukd not be subjected to extremely low temperotures, or low air pressure at high altitude. It the battery is exposed to extremely high temperatures it could result in an explosion or the leaking of flammable liquid or gas. 1 Please take care when disposing of the unit; disposal in a fire, oven, mechanicolly crushing or cutting mochine could cause explosion.
Product overview
Earphone Function Operation
- Pause: Press either O button
- Play: Press either O button
- Next Track: Press the right O button twice in quick succession
- Previous Track: Press the left O button twice in quick succession
- Volume Up: Press the right O button 3 times in quick succession
- Volume down: Press the left O button 3 times in quick succession
- Answer Call: Press either O button
- Reject Colt Press and hold either O button for 2 sec.
- End cal: Press either O button twice in quick succession
- Activating Phone Assistant: Press and hold either O button for 2 seconds, then release
Power ON/OFF and Pairing
- Take both earphones out from the charging case to turn on the earphones.
- Once the earphones are powered on, they will enter sync mode and move to pairing mode with LED indicators fashing blue and red.
- Search the Bluetooth list with pairing name KM43233380
- Click to pair with your Bluetooth device. LED indicators will automatically turn off until the earphone is connected with Bluetooth device successfully
- Put the earphones into the charging case to tum them off.
- Press and hold the earphone button for 5 seconds to manuolly turn the earphones ON/OFF.
Charging the Case
- Connect the USB-C charging cable into the charging case. Make sure USB-A into a standard USB 5V/1A output to avoid any damage.
- LED display will show battery level while the case is charging
- LED display wil show 100% when fully charged.
Charging the Earphones
- Put both earphones into the charging case, making sure that pins are fully connected
- Earphones LED indicator will stoy red while they are charging.
- When the earphone are fully charged the LED indicator will turn blue for 15 seconds and then turn off.
Safety Instructions
- Earphones built-in rechargeable battery, before using them the first time, we recommend you fully charge the battery
- To ensure the battery life, the the earphones and charging case should be fully charged once a month.
- If the earphones fail to connect to Bluetooth device, put the earphones into the charging case to turn them off. Make sure both earphones are fully connected with the charging pin, tum off
- Bluetooth in your device. Try to turn on the earphones and then repeat the pairing process
- The earphones can only be used with the provided charging case.
Specifications
- Model Number: 43233380
- Bluetooth version 5.3
- Driver Size: 10mm
- Sensitivity: 103dB + 3dB at 1kHz
- Frequency Response: 20Hz -20kHz
- Impedance: 320
- Transmission Distance: 10m
- Earbud Battery capacity 30mAh
- Case Battery capacity: 250mAh
- Earphone charging time: 1 hour
- Case charging time: approx. 1.5 hour
EMAIL: designdcrest.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>