artsound Brainwave05 Headphones User Manual
- June 9, 2024
- ArtSound
Table of Contents
artsound Brainwave05 Headphones
Thank you for purchasing ArtSound Brainwave05 headphones. Please read this user manual carefully and keep it for future reference.
What’s in the box
- Headphones
- USB-C charging cabe
- User manual
Overview
- Volume Up / Next Song
- Multi-function Button
- Volume Down / Previous Song
- LED Indicator
- 3.5mm Audio Jack
- Built-in Mic
- Charging Indicator
- USB-C Charging Port
Getting started
At first use, it is advised to charge the headphone. Please, use the provided
charging cable to connect the case with a powered USB port.
Pairing with Devices
As long as there is no Bluetooth audio device connected, the pairing mode will stay open, ready to connect.
In order to pair them with your audio device, turn on Bluetooth and check the
list with available devices, where you can select ‘Brainwave05’ to connect
with.
When succesfully paired, the LED indicator will slowly flash blue.
lf you are asked for the Password/PINcode during the pairing procedure, enter
‘0000’ to proceed.
Next time, Brainwave05 will reconnect with the latest paired device
automatically (assuming Bluetooth is on and within range of the earbuds).
lf the earbuds are left on but not paired to any device, they will
automatically turn off after 5 minutes to save battery life.
Press and hold the Multi-function and volume down ‘-‘ buttons simultaneously
for 5 seconds to clear the bluetooth pairing record on your Brainwave05
headphones.
AUX Wired Connection
The Brainwave05 headphone supports a wired auxiliary input for an external
audio source connection. Simply plug in the audiocable from your wired audio
device.
Please, note that wired mode is not available with an empty battery of the
headphone.
Button controls
- Hold the multi-function button for 3 seconds to turn on your Brainwave05 headphone.The device enters the pairing mode automatically when there is no connection to any (previously paired) device.
- Hold the multi-function button again for 3 seconds to turn off your Brainwave05
- Press shortly to adjust volume. Give a long press to skip to next/previous song.
- Press the mult-function button shortly to play/pause the music or answer or end a call.
- Double press the multi-function button to reject an incoming call or activate the voice control assistant on your paired device.
Collapsible Design
Technical specifications
- Play time: 15 hours
- Charging time: 1,5-2 hours
- Splashproof: IPX4
- Built in microphone: 1pc talking mic
- Dimensions speaker driver: 2x 40mm, 32ohm
- Headphone/phone batt capacity: 3,7V / 360mAh Charging
- voltage: 5V / 360mAh
- Sensitivity: 100+ / -3db at 1kHz
- Bluetooth version: 5.0
- Included: Charging cable, type c and audio cable
- Weight: 140g
FAQ
Q: The earbuds are turned on, but not connecting to my device.
A: Make sure Bluetooth is turned on, on your device. Follow the instructions
in the ‘pairing’ section of this manual.
Q: I have established a connection with my smartphone, but cannot hear any
sound.
A: Doublecheck the volume level on your smartphone and the earbuds. Some
smartphones require you to set up the earbuds to an audio output device before
the audio can be transmitted. In case you’re using a music player or other
device, please make sure it supports the A2DP stereo music profile.
Q: The sound is not very clear or the caller cannot hear my voice
clearly.
A: Adjust the volume on your smartphone and the earbuds. Try getting closer to
your smartphone to rule out the possibility of interference or range-related
issues.
Q: What is the wireless range of the earbuds?
A: The maximum range 10 meters (33ft). However, the actual range depends on
environmental factors. For optimal performance, make sure that there are no
major obstacles (e.g. reinforced steel walls) between the earbuds and your
device.
Warranty conditions
2 year warranty from date of purchase. The warranty is limited to the repair
of replacement of the defective material insofar as this defect is a result of
normal use and the device has not been damaged. Artsound is not responsible
for any other costs that ensue as a result of the defect (e.g. transport). For
details, please consult our general terms and conditions of sale.
To prolong battery lifespan, fully charge at least once every 3 months.
Battery life will vary due to usage patterns and environmental conditions. Do
not expose to liquids. It may result in permanent damage to the earbuds or
case. Do not use or place near a heat source. Do not use the earbuds at high
volume for extended periods of time, as this may cause permanent hearing
damage.
At first use, it is advised to charge the earbuds and the case. Put the earbuds
in their case and use the provided charging cable to connect the case with a
powered USB port.
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive
2002/96/EC in order to be recycled or dismantled to minimize its impact on the
environment. For further information, please contact your local or regional
authorities.
I, House Of Music NV, hereby declare that the type of radio equipment ARTSOUND
complies with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity can be found at the following internet address:
http://www.artsound.be/en/support/downloads.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>