frisco 304045 Wooden Rabbit Run Instruction Manual

frisco 304045 Wooden Rabbit Run

WARNINGS & CAUTIONS

PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS TO AVOID PET INJURY OR PROPERTY DAMAGES.

• Follow the instructions carefully and make sure you’ve completed each step.
• Keep away from heat sources and open flames.
• Do not sit on, climb on or shake the product!
• This wooden product is suitable for providing temporary shelter for your pets in an outdoor environment.
• This product has been treated with a harmless water-based wood preservative solution, which provides basic protection against the elements.
• This product should be re-treated at least once a year with a similar harmless solution to protect the wood.
• Choose a location that is leveled and dry, as well as being as sheltered from the weather as possible.
• This product is not for human use. Please, never allow children to play in or on the hutch. For pet use only.
• This product is not for cats/dogs. It is meant for rabbits.
• Please be aware that this product is not intended to be chewed on.

GEAR UP

You’ll need a Philips head screwdriver (not included) to complete the assembly.

COMPONENTS

Prior to assembly, be sure to identify and sort all components shown below.

ASSEMBLY INSTRUCTIONS

Tip: This item has predrilled holes to make set up easier for your rabbit’s home.

STEP 1

Connect Panel (1) and (2) using Screw (A). Connect Panel (2) and (3) using Bracket (F) and Screw (C).

STEP 2

Connect Panel (2) and (4) using screw +(A). Connect Panel (5) and (4) using screw (A). Connect Panel (5) and (1) using screw (A).

STEP 3

Connect Panel (10) and (3) using Screw (A).

STEP 4

Connect Panel (6) and (7) using Bracket (F) and Screw (C). Then connect to Panel (1) and (10) using Screw (A).

STEP 5

Insert floors (8) and (9) in the house.

STEP 6

Assemble the roof. Connect the hinge roof (11) to back Panel (1) using Screw (B). The hinge should be closer to the outside of the house. Connect Hinge (E) to roof and Panel (5) using Screw (D).

STEP 7

Fix the top mesh Panel (12) and then (13) using Screw (A).

STEP 8

Connect Panel (12) and (13) using Screw (C).

FINISHED ASSEMBLY

OVERVIEW

CUSTOMER SUPPORT

Questions? Call our customer service 1-800-672-4399

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>