MAXIM 24174 Zeta Medium LED Pendant Instruction Manual
- June 9, 2024
- MAXIM
Table of Contents
MAXIM 24174 Zeta Medium LED Pendant
PRODUCT NAME: Zeta Medium LED Pendant
ITEM NUMBER: 24174
Please consult a qualified electrician for hanging fixture and wiring.
Light Source: LED Integrated 24W
Made in China
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product
Risk of suffocation!
Keep anypackaging materials away from children.
Lamp Care Instructions
-
Carefully read through the instruction sheet before assembly and using the product.
-
Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur. -
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire
-
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
CONTENTS
Before getting,started,ensure the package contains the following
components:
This fixture must be installed with compatible dimmer types only. Improper
wiring of fixture and/or use of incorrect dimmers will cause catastrophic
failure and void the warranty.
FOR OPTIMAL USE
Traic
For example:
Lutron DVCL-150P/DVCL-153P
DO NOT USE
0-10V or magnetic dimmer
IMPORTANT
Make sure that your dimmable LED fixture is paired with the correct dimmer
type
Must be installed by a licensed electrician with knowledge of electronic
lighting systems