artsound Brainwave01 True Wireless Earbuds User Manual
- June 9, 2024
- ArtSound
Table of Contents
artsound Brainwave01 True Wireless Earbuds User Manual
Thank you for purchasing Artsound Brainwave01 True Wireless earbuds.
Please read this user manual carefully and keep it for future reference.
What’s in the box
-
Left & right earbud
-
Charging case
-
Three pairs of ear tips
-
USB-C Charging cable
-
User manual
Overview
- Touch button
- Earbud indicator
- Right earbud
- Left earbud
- Battery indicator
- Charging case
Wearing notice
Gently insert your earbuds and adjust to an appropriate angle for a comfortable fit.
Getting started
At first use, it is advised to charge the earbuds and the case. Put the
earbuds in their case and use the provided charging cable to connect the case
with a powered USB port.
Turn on
When taking out the earbuds from their case, they turn on automatically.
If not, press and hold the touch button for 3 seconds to turn them on
manually.
Turn off
The earbuds are turned off once they are put back into their case.
Pairing with Devices
The earbuds itself will auto-pair to each other when taken out of their case.
The status indicator on the master earbud will flash blue and red, and is now
ready to connect to your audio device.
As long as there is no Bluetooth audio device connected, the pairing mode will
stay open, ready to connect.
In order to pair them with your audio device, turn on Bluetooth and check the
list with available devices,
where you can select ‘Brainwave01’ to connect with.
Next time, Brainwave01 earbuds will reconnect with the latest paired device
automatically (assuming Bluetooth is on and within range of the earbuds).
Brainwave01 lf the earbuds are left on but not paired to any device, they will
automatically turn off after 5 minutes to save battery life.
Touch button controls
| Function | Left earbud | Right earbud |
|---|---|---|
| Play / pause | Tap | |
| Volume up | / | Tap and hold |
| Volume down | Tap and hold | / |
| Previous track | Double tap | / |
| Next track | / | Double tap |
| Pick up / end incoming call | Tap | |
| Reject incoming call | Tap and hold | |
| Voice assistant | Tap | x3 |
| Clear paired devices list | (In pairing mode) triple tap both earbuds |
Technical specifications
- Built in microphone: 1pc talking mic
- Charging time earbuds: 1,5-2 hours
- Touch control: Yes
- Charging time box: 1,5 hours
- Splashproof: IPX4
- Dimensions speaker driver: 2x9mm, 16ohm
- Earbud/phone batt capacity: 3,7V / 40mAh
- Charging case batt capacity: 3,7V / 280mAh
- Charging voltage: 5V / 280mAh
- Sensitivity: 100+ / -3db at 1kHz
- Bluetooth version: 5.0
- Extra: 3 silicone eartips
- Included: Charging cable, type c
- Battery type: Li-Polymer, Earbuds: 40mAh (each), Case: 280mAh
- Weight: 40g
- Weight bud: 4,3g
Warranty conditions
2 year warranty from date of purchase. The warranty is limited to the repair of replacement of the defective material insofar as this defect is a result of normal use and the device has not been damaged. Art sound is not responsible for any other costs that ensue as a result of the defect (e.g. transport). For details, please consult our general terms and conditions of sale.
To prolong battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. Do not expose to liquids. It may result in permanent damage to the earbuds or case. Do not use or place near a heat source. Do not use the earbuds at high volume for extended periods of time, as this may cause permanent hearing damage.
At first use, it is advised to charge the earbuds and the case. Put the earbuds in their case and use the provided charging cable to connect the case with a powered USB port.
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities.
I, House Of Music NV, hereby declare that the type of radio equipment ARTSOUND complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet address: http://www.artsound.be/en/support/downloads
FAQ
Q: The earbuds are turned on, but not connecting to my device
A: Make sure Bluetooth is turned on, on your device. Follow the instructions in the ‘pairing’ section of this manual.
Q: I have established a connection with my smartphone, but cannot hear any sound.
A: Doublecheck the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds to an audio output device before the audio can be transmitted. In case you’re using a music player or other device, please make sure it supports the A2DP stereo music profile.
Q: The sound is not very clear or the caller cannot hear my voice clearly.
A: Adjust the volume on your smartphone and the earbuds. Try getting closer to your smartphone to rule out the possibility of interference or range-related issues.
Q: What is the wireless range of the earbuds?
A: The maximum range 10 meters (33ft). However, the actual range depends on environmental factors. For optimal performance, make sure that there are no major obstacles (e.g. reinforced steel walls) between the earbuds and your device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>