iBELL IBL WG 2000L Table Top Wet Grinder Instruction Manual
- June 9, 2024
- iBELL
Table of Contents
iBELL IBL WG 2000L Table Top Wet Grinder Instruction Manual
CARE AND PRECAUTIONS
To ensure that your table top wet grinder performs to its maximum for the years to come, please follow the precautions:
- Always keep the wet grinder clean and dry when not in use.
- Disconnect the electric cord from the switch when not in operation.
- Keep it away from heat sources.
- Lift the appliance holding it only from the base, not the drum or motor cover.
- Do not run the wet grinder when empty for more than a minute.
- Add adequate water while grinding.
- Do not attempt to lift the appliance when in operation.
- Use a damp sponge for cleaning the body, do not pour water on the appliance.
- Do not insert any object through the slits provided.
- After use, clean the drum and roller assembly thoroughly.
- Supervise closely when the appliance is being operated in the presence of children.
- Do not run the grinder if the operating conditions are not normal.
In case of any mechanical faults, contact your nearest dealer.
Using Instruction
Place the Drum Assembly on the (entre Shaft. Gently Rotate the Drum till it
seats properly| Place the Roller assembly on the centre shalt as shown in the
Figure| Place the Top nut with spring assembly and fix it by tightening| Pour
a cup of water in the Drum| Press “ON” switch to Start the Grinder
---|---|---|---|---
| 
| | |
Put the Grinding Medium in small quantities with adequate water| Place the
glass lid while running the machine| After the required consistency is
achieved
switch OFF the Grinder| Remove the Roller assembly and wipe down the batter
for cleaning| Clean and wash the drum and Stone assembly thoroughly
| | | |
Attachments
ATTA KNEADER
Effectively kneads Atta to the right consistency.
The Atta kneader mobs your roti’s purls and parathas softer and tastier.
OPERATION
Remove roller stones and place Atta kneader in the drum.
Add Atta in the drum assembly (approx.350gm).
Pour a little water and switch on the appliance.
Add o little oil and salt to taste.
Add water till you get the required consistency.
**CITRUS JUICER
OPERATION**
Remove the roller stones and place the citrus juicer on the shaft.
Take one half of a citrus fruit and hold it firmly against the grooves
provided. Switch on the grinder.
The juice extract will be collected in the attachment itself.
Switch off the grinder before removing the attachment from the shaft.
COCONUT SCRAPER
This attachment scrapes coconut to absolute fineness for tastier chutneys.
OPERATION
Remove Roller Stone and fix the coconut scraper to the top Centre pipe.
Gently fix it in the groove provided.
Take one half of the coconut and hold it firmly on the scraper, then switch on
the Grinder.
After scrapping is over remove the scraper from the shaft and collect coconut
bits from the drum.
TECHNICAL SPECIFICATIONS
- Drum Capacity: 2 ltr.(Input 1 Kg, Soaked rice output 2 Ltr. batter)
- Voltage: 230Y, AC – 50Hz
- Drum Material: Stainless Steel
- Drum Speed: 130 RPM
(with Load)
ATTACHMENTS: Atta Kneader, Coconut Scraper and Citrus Juicer
IN THE BOX: Table Top Wet Grinder, Lid, Attachments and Manual
| Grinder’s Quantity| Quantity| Wetting limo| Water Quantity| Grinding Time
---|---|---|---|---|---
RICE| Maximum Quantity| 2 Litres 1 KG| 4 Hours| 3/4 Drs.| 20-25 Minutes
Maximum Quantity| 3/4 KG| 4 Hours| 1/2 las.| 15.20 Minutes
DHAL| Maximum Quantity| 200 Grams| 4 Hours| 3/4 Ltrs.| 20.25 Minutes
Maximum Quantity| 100 Grams| 4 Hours| 1/2 Ltrs.| 15.20 Minutes
Limitations Of Warranty
- Damage resulting from accidents, misuse, abuse, alteration, tempering or failure of the purchaser to follow the normal operating procedure outlined in user manual.
- Defect of damage due to spillage of liquids, due to insect or wrong use of electrical supply and voltage.
- Normal wear and tear, corrosion, rusting or stains.
- Scratches and damage to outer surface areas and externally exposed units or parts that are due to normal customer use.
- Claim for damaged /missing parts after seven days from the original date of purchase
- If any part or parts of the unit are replaced with a part or parts not 4 supplied or approved by company or unit has been dismantled or repaired by any person other than authorized technician.
- Product which has serial number removed or tampered
- If the warranty card is being altered, defaced or erased in any manner whatsoever.
- If obtain service, the product must be sent through freight prepaid to i BELL Service Center
Dear customer
Thank you for purchasing product. Your product is under warranty in
accordance with terms and conditions stated herein.
- Your units and components contained therein are warranted against defective material and workmanship for a period of 24 months from the date of purchase.
- To obtain warranty protection, notice of alleged defect must be given promptly upon discovery and warranty card must be presented along with proof of date of purchase to our service personnel at the time of service.
- The company decision on identification of the defects due to faulty/defective spare parts or faulty workmanship or misuse/abuse shall be final and you shall agree to abide by such decision.
- The defective parts/material shall be replaced with a functionally working equivalent part/material and defective part/material will become the property of the company.
CUSTOMER CARE CENTER
For any query or concerns related to the after sales service, you may please
contact us on the number or email mentioned below
Tel: 0484-2922600/2620012 1800 120 555 999
E-mail: service@ibellsworld.com
Web: www.ibellsworld.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>