OTL TECHNOLOGIES True Wireless Sound Earbuds User Guide
- June 8, 2024
- OTL TECHNOLOGIES
Table of Contents
OTL TECHNOLOGIES True Wireless Sound Earbuds
SAFETY INSTRUCTIONS
- Read all the instructions carefully before using the product and keep them for future reference.
- Do not immerse in water.
- Unsuitable for use by children under the age of 3 due to small parts which may cause choking.
- We recommend that children aged 3-7 are supervised by an adult whilst using the product, prolonged use is not advised.
- The device may become warm while charging.
- Set volume to low before turning on sound.
- Long-term exposure to loud noise may cause damage to eardrums or loss of hearing.
PRODUCT OVERVIEW
- MFB (Multi Function Button)
- Microphone
- Charging port
FIRST TIME USE/PAIR TO NEW DEVICE
Take both earpads out from the charging case, then put them back to the
charging case to activate the earpads.
Note: please charge your earpads before first time use.
PAIR WITH BLUETOOTH DEVICES
Turn Bluetooth function on in the settings of your Bluetooth enabled device.
- Take both earpads out from the charging case.
- The LED indicator light will flash on one of earpads to detect Bluetooth enabled devices near you and will enter pairing mode.
- “OTL TWS EARPODS” will appear on the Bluetooth device list, select “OTL TWS EARPODS” to establish pairing.
- When pairing is successful, the LED on both earpads will flash BLUE.
USE WITH YOUR OTHER DEVICES.
When you want to play audio from another Bluetooth device, disconnect the earpads from the original device and follow steps 1-4 to re-pair the earpads with a new Bluetooth enabled device.
POWER ON
Take both earpods out from the charging case and both earpods will be automatically power on (make sure the charging case is charged).
POWER OFF
Put both earpods back into the charging case, it will automatically power off
CHARGING THE EARPODS
Insert the earpads into the charging case, the LED light will be solid RED when charging. once fully charged, the LED light will be turned off.
CHARGING THE CASE
Please charge your charging case before first time use. Ensure to charge via the provided type C cable. The LED indicator light will be flashing during charging and will turn on solid once it is fully charged. When the battery is low, only the left LED indicator light will flash.
CHANGING EAR TIPS
To remove an ear tip, pull firmly with your fingers at the base of the ear
tip.
To attach an ear tip, with your fingers at the base of the ear tip, push the
ear tip onto the connector until it clicks into place.
For more tip sizes, see inside box.
PLAY / PAUSE
When listening to music, touch right/left earpad twice to play/pause.
SKIP TRACK FORWARD/BACKWARD
Whilst listening to music, press the right earpad for 2 seconds to forward to
the next track, or press the left ear pod for 2 seconds to go backwards to the
previous track.
VOICE ASSISTANT
Touch right/left earpad three times to activate voice assistant (i.e. Siri or
Google Assistant)
ANSWER CALL/HANG UP CALL
Touch the right/left earpad twice to answer the incoming call and touch twice
again to hang up.
REJECT CALL
Press MF button on right/left earpad for 2 seconds to reject the incoming
call.
TROUBLESHOOT
If an error occurs with the earpads, please follow the steps below:
- Take one of the earpads out of the charging case
- The LED light will flash with BLUE and RED quickly, press the MF area for 6 seconds. The RED LED light will go off after 1 second.
- Put the earpad back into the charging case
- Take the other earpad out from the case and follow steps 1-3.
- Take both earpads out from the charging case, search for “OTL TWS EARPODS” from Bluetooth enable device while one of earpad will flash RED and BLUE alternatively.
- When the earpads power is low, the Bluetooth range may be affected. Please charge the earpads to avoid disruption during use.
- Please see our website www.otltechnologies.com for general troubleshooting method instructions.
WARNING
- This product is not a toy.
- Do not disassemble, repair or modify the headphones.
- Keep the headphones dry and do not store the headphones in damp areas to avoid damage to the headphones.
- Avoid dropping the headphones as it may cause damage to the product.
- Do not insert jack plug into electric sockets.
INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
(PRIVATE HOUSEHOLD)
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general house hold
waste.
For proper treatment, recovery and recycling, please take these products to
designated collection points, where they will be accepted on a free of charge
basis.
Alternatively, in some countries you may be able to return your products to
your local retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and
prevent any potential negative effects on human health and the environment
which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest
designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
www.otltechnologies.com |
info@otltechnologies.com Made in PRC
Oceania Trading Ltd/OTL Technologies
2 Dinsmore Road, London SW12 9PS, UK
Hullenbergweg 278-308, 1101 BV Amsterdam, Zuid-oost, NL
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>