BADABULLE B005005 Blue Anti-leak Drinking Cup Instruction Manual

Table of Contents

BADABULLE-B005005-Blue-Anti-leak-Drinking-Cup-PRODUCT

Read the instructions carefully before use and keep them for future reference.

Ensure the ring is screwed on correctly to avoid potential leaks.
Always confirm that the teat is correctly inserted into the ring by pulling it upwards through it. When you put the spout back on the collar, make sure to place it as in diagram A, so that once the collar + spout are screwed together, the spout is positioned correctly (perpendicular to the cup handles). Make sure you screw the collar + spout onto the bottle tightly.

Before first use, disassemble and clean the product and then place the components in boiling water for 5 min. This is to ensure hygiene.
Before each subsequent use clean carefully to ensure hygiene.
Do not use abrasive or aggressive products such as detergents.Rinse thoroughly in clean water and dry the bottle and accessories carefully. We do not recommend cleaning the items in a dishwasher as this is more aggressive than cleaning by hand. The item may become opaque over time and the bottle’s decorations may degrade.
The teat should not be washed in a dishwasher – use soapy water and rinse in lots of clean water. Silicone is a flexible, nonallergic, transparent material and is odourless.
Use a bottle brush to clean the teat being careful notto damage it or its milk hole.
Ensure teats do not come into contact with oil based foods such as sauces or gravy. These types of food may stain the bottle and its elements, particularly silicone teats.
After cleaning each time, hot sterilise the bottle, teats and all of its elements or sterilize in boiling water for 5 minutes. Leave to cool before use.
Ensure that all parts including areas which may not be visible but where food has passed through are thoroughly washed in soapy water and flushed with clean water to remove any food residues.

Continuous and prolonged sucking of fluids will cause tooth decay.
Always check food temperature before feeding.
Keep components not in use out of the reach of children.
Throw away at the first signs of damage or weakness.
Never attach to cords, ribbons, laces or loose parts of clothing. The child may be strangled.
Always use this product with adult supervision.
Never use feeding teats as a soother.
Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling or if the product has disassembled. Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the bottle/cup for long periods through the day and particularly through the night, when saliva flow is reduced or if it is used as a soother.
Inspect the feeding teat before each use and pull the feeding teat in all directions. Throw away at the first signs of damage or weakness.
Do not leave a feeding teat in direct sunlight or heat, or leave in disinfectant (“sterilising solution”) for longer than recommended, as this may weaken the teat.
Take extra care when microwave heating; localized over heating can occur. Always mix the heated food and check the temperature before feeding