Dyson DC59 Animal Digital Slim Cordless Vacuum Cleaner Brush Tool User Manual

Dyson DC59 Animal Digital Slim Cordless Vacuum Cleaner Brush Tool

SPECIFICATIONS

• BRAND Dyson
• COLOR Iron
• MODEL NAME 949852-05
• INCLUDED COMPONENTS Nozzle, Brush
• VOLTAGE 2 Volts
• ITEM WEIGHT 6 Pounds
• PRODUCT DIMENSIONS 8 x 6.9 x 2.7 inches

DESCRIPTION

Brush Tool for Dyson Cordless Vacuum Cleaner Replacement. Dyson DC59 Animal, DC61, DC62, V6 Animal, and V6 Fluffy models are all compatible. Please keep in mind that this brush head is only compatible with the models listed.

IMPORTANT SAFETY INSTRUCTIONS

Before using this machine read all instructions and cautionary markings in this manual and on the machine

When using an electrical appliance, basic precautions should always be followed, including the following:

WARNING
These warnings apply to the appliance, and also where applicable, to all tools, accessories, chargers or mains adaptors.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

1. This Dyson machine is not intended for use by persons (including children) with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety.
2. Do not allow to be used as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the machine.
3. Use only as described in this Dyson Operating Manual. Do not carry out any maintenance other than that shown in this manual, or advised by the Dyson Helpline.
4. Suitable for dry locations ONLY. Do not use outdoors or on wet surfaces.
5. Do not handle any part of the plug or machine with wet hands.
6. Do not use with a damaged cord or plug. If the supply cord is damaged it must be replaced by Dyson, its service agent or similarly qualified persons in order to avoid a hazard.
7. If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact the Dyson Helpline.
8. Contact the Dyson Helpline when service or repair is required. Do not disassemble the machine as incorrect reassembly may result in an electric shock or fire.
9. Do not stretch the cord or place the cord under strain. Keep the cord away from heated surfaces. Do not close a door on the cord, or pull the cord around sharp edges or corners. Arrange the cord away from traffic areas and where it will not be stepped on or tripped over. Do not run over the cord.
10. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. The use of an extension cord is not recommended.
11. Do not use to pick up water.
12. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they or their vapors may be present.
13. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
14. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Do not point the hose, wand or tools at your eyes or ears or put them in your mouth.
15. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
16. Use only Dyson recommended accessories and replacement parts.
17. Do not use without the clear bin and filter in place.
18. Unplug from the outlet when not in use for extended periods and before maintenance or servicing.
19. Use extra care when cleaning on stairs.
20. Do not install, charge or use this machine outdoors, in a bathroom or within 10 feet (3 meters) of a pool. Do not use on wet surfaces and do not expose to moisture, rain or snow.
21. Use only Dyson chargers for charging this Dyson machine. Use only Dyson approved batteries: other types of batteries may burst, causing injury to persons and damage.
22. Do not incinerate this machine even if it is severely damaged. The battery may explode in a fire.
23. Always turn ‘OFF’ the machine before connecting or disconnecting the motorized brush bar.

USING YOUR DYSON MACHINE

Please read the ‘important safety instructions’ in this dyson operating manual before proceeding.

OPERATION

• Do not use outdoors or on wet surfaces or to vacuum water or other liquids – electric shock could occur.
• Ensure the machine remains upright in use. Dirt and debris may be released if it is turned upside down.
• Do not operate while checking for blockages.
• For domestic indoor and car use only. Do not use it while the car is in motion or while driving.
• To operate the boost mode, hold the trigger down and press the boost button. The ‘boost’ button will light up.
• To switch off boost mode, hold the trigger down and press the boost button again. Note: The machine will retain the last used mode. So if you use it in boost mode and do not disengage it, the machine will operate in boost mode when it is next used until you depress the boost button to disengage it.
• This product has carbon fiber brushes. Take care if coming into contact with them, as they may cause minor skin irritation. Wash your hands after handling the brushes.
• To watch a short online video visit: dyson.com/dc59gettingstarted

DOCKING STATION INSTALLATION

• Use appropriate mounting hardware for your wall type and ensure that the docking station is mounted securely. Ensure no pipe work (gas, water, air) or electrical cables, wires or ductwork are located directly behind the mounting area. The docking station must be mounted in accordance with regulations and applicable codes/standards (state and local laws may apply). Dyson recommends the use of protective clothing, eyeware and materials when installing the docking station.

CARPETS OR HARD FLOORS

• Before vacuuming your flooring, rugs and carpets, check the manufacturer’s recommended cleaning instructions.
• The brush bar on the machine can damage certain carpet types and floors. Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming without the motorized floor tool and consulting with your flooring manufacturer.
• Before vacuuming highly polished floors, such as wood or lino, first check that the underside of the floor tool and its brushes are free from foreign objects that could cause marking.

LOOKING AFTER YOUR DYSON MACHINE

• Do not carry out any maintenance or repair work other than that shown and described in this Dyson Operating Manual, or advised by the Dyson Helpline.
• Only use parts recommended by Dyson. If you do not this will invalidate your warranty.
• Store the machine indoors. Do not use or store it below 37.4°F (3°C). Ensure the machine is at room temperature before operating.
• Clean the machine only with a dry cloth. Do not use any lubricants, cleaning agents, polishes or air fresheners on any part of the machine. VACUUMING
• Do not use without the clear bin and filter in place.
• Fine dirt such as flour should only be vacuumed in very small amounts.
• Do not use the machine to pick up sharp hard objects, small toys, pins, paper clips, etc. They may damage the machine.
• When vacuuming, certain carpets may generate small static charges in the clear bin or wand. These are harmless and are not associated with the mains electricity supply. To minimize any effect from this, do not put your hand or insert any object into the clear bin unless you have first emptied it. Clean the clear bin with a damp cloth only. (See ‘Cleaning the clear bin’.)
• Use extra care when cleaning on stairs.
• Do not rest the machine on chairs, tables, etc.
• Do not press down on the nozzle with excessive force when using the machine as this may cause damage.
• Do not leave the cleaner head in one place on delicate floors.
• On waxed floors the movement of the cleaner head may create an uneven luster. If this happens, wipe with a damp cloth, polish the area with wax, and wait for it to dry.

EMPTYING THE CLEAR BIN

• Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
• Ensure the machine is disconnected from the charger before emptying the clear bin. Be careful not to pull the ‘ON’ trigger.
• To make emptying the clear bin easier, it is advisable to remove the wand and floor tool.
• To release the dirt, push the red button by the clear bin: Press once to open the bin base. Press a second time to release the clear bin from the main body of the machine.
• To minimize dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.
• Remove the clear bin carefully from the bag.
• Seal the bag tightly, dispose as normal.
• Close the clear bin base so it clicks into place and is secure.

CLEANING THE CLEAR BIN

• Ensure the machine is disconnected from the charger before removing the clear bin. Be careful not to pull the ‘ON’ trigger.
• Remove the wand and floor tool.
• Push the red button by the clear bin: Press once to open the bin base. Press a second time to release the clear bin from the main body of the machine.
• Remove the clear bin carefully.
• Clean the clear bin with a damp cloth only.
• Do not use detergents, polishes or air fresheners to clean the clear bin.
• Do not put the clear bin in a dishwasher.
• Clean the cyclone shroud with the brush on the combination tool to remove lint and dust.
• Ensure the clear bin is completely dry before replacing.
• To replace the clear bin, push the clear bin up and in to the main body of the machine. It will click into place.
• Close the clear bin base so it clicks into place and is secure.

WASHING YOUR FILTER

• Ensure the machine is disconnected from the charger before removing the filter. Be careful not to pull the ‘ON’ trigger.
• Your machine has one washable filter, located as shown.
• To remove the filter, lift it out of the top of the machine.

Check and wash the filter regularly according to instructions to maintain performance.

• The filter may require more frequent washing if vacuuming fine dust or if used mainly in ‘HIGH CONSTANT SUCTION’ mode.
• Wash the filter with cold water only.
• Run water over the outside of the filter until the water runs clear.
• Squeeze and twist with both hands to make sure the excess water is removed.
• Lay the filter on its side to dry. Leave to dry completely for a minimum of 24 hours.
• Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave, or near an open flame.
• To refit, place the dry filter back into the top of the machine. Make sure it is seated properly.
• To watch a short online video visit: dyson.com/dc59filterwash

LOOKING FOR BLOCKAGES

• Ensure the machine is disconnected from the charger before looking for blockages. Be careful not to pull the ‘ON’ trigger.
• Do not operate while checking for blockages as doing so could result in personal injury
• Beware of sharp objects when checking for blockages.
• To gain access to blockages in the floor tool, remove the base plate by using a coin to loosen the screw marked with a padlock.
• If you cannot clear an obstruction you may need to remove the brush bar. Use a coin to unlock the fastener marked with a padlock. Remove the obstruction. Replace the brush bar and secure it by tightening the fastener. Ensure it is fixed firmly before operating the machine.
• This product has carbon fiber brushes. Take care if coming into contact with them, as they may cause minor skin irritation. Wash your hands after handling the brushes.
• Refit all parts securely before using.
• Clearing blockages is not covered by your warranty.

BLOCKAGES – THERMAL CUT-OUT

• This machine is fitted with an automatically resetting thermal cut-out.
• Large items may block the tools or nozzle. If any part becomes blocked the machine may overheat and automatically cut out.
• Leave to cool down for 1-2 hours before checking the filter or for blockages.
• Ensure the machine is disconnected from the charger before looking for blockages. Failure to do so could result in personal injury.
• Clear any blockage before restarting.
• Refit all parts securely before using.
• Clearing blockages is not covered by your warranty.

DIAGNOSTICS – MAIN BODY

When in use, trigger pressed:

DIAGNOSTICS – BATTERY

when in use, trigger pressed:

When charging the battery:

CHARGING AND STORING

• This machine will switch ‘OFF’ if the battery temperature is below 37.4°F (3°C). This is designed to protect the motor and battery. Do not charge the machine and then move it to an area with a temperature below 37.4°F (3°C) for storage purposes.
• To help prolong battery life, avoid recharging immediately after a full discharge. Allow cooling for a few minutes.
• Avoid using the machine with the battery flush to a surface. This will help it run cooler and prolong battery run time and life.

BATTERY SAFETY INSTRUCTIONS

• If the battery needs replacing please contact the Dyson Helpline.
• Use only Dyson chargers for charging this Dyson machine.
• The battery is a sealed unit and under normal circumstances poses no safety concerns. In the unlikely event that liquid leaks from the battery do not touch the liquid and observe the following precautions:
• SKIN CONTACT – can cause irritation. Wash with soap and water. Inhalation – can cause respiratory irritation. Expose to fresh air and seek medical advice.
• EYE CONTACT – can cause irritation. Immediately flush your eyes thoroughly with water for at least 15 minutes. Seek medical attention.
• DISPOSAL – wear gloves to handle the battery and dispose of it immediately, following local ordinances or regulations.

CAUTION

The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, short contacts, heat above 140°F (60°C), or incinerate. Keep away from children. Do not disassemble and do not dispose of in fire.

Frequently Asked Questions

Is this brush head compatible with the DC59?

Yes, it is compatible with the DC59 Animal.

Will this fit the DC59 Animal?

Yes, this will fit the DC59 Animal.

Does this come with a warranty?

Yes, it does come with a warranty.

Does this come with a charger?

No, you will need to purchase one separately.

Will this work on the Dyson V6 Animal?

Yes, it will work on the V6 Animal.

Is there a warranty on this product?

Yes, there is a warranty on this product.

Will it work with dc44 animal?

Yeah. That’s the same one I have and it works just fine.

Will this for Dyson animal 25?

Sorry, it will not work on the 25.

will it work for v6 fluffy?

It does not fit the V6. we had many returns because of the misinformation on the listing. Amazon, please remove the V6 from the list of compatible models.

Is this used for carpet or hard floors?

It is used for both carpet and hard floors. I like my Dyson DC-58 very much. The powered motor head certainly boosts its vacuuming power.

Will this work on a D.C. 35?

Not sure. Should give Dyson support on that one . Probably different connectors.

Is this rated for USA voltage 119-120v?

The power comes from the battery on the handle. It is not rated as 120V or 240V, that is irrelevant.

I have a dyson sv04 hand held stick. and need a replacement motor head. or the motor inside the head. it’s approx. 4/5 inches long and grey.

You need to look at the parts list, either online or in your instruction manual. I learned the hard way.

does this work on the V6 Slim?

Not really sure about that but you may have better luck calling Dyson support.

Will this work on a V6 Car/boat?

This item is a replacement part for a Dyson cordless vacuum. To make it work on a V6 car (or boat), you would need the remainder of the vacuum cleaner.

Dyson-DC59-Animal-Digital-Slim-Cordless-Vacuum-Cleaner-Brush- Tool

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>