GENESIS 2022 G80 Getting Started Owner’s Manual
- June 8, 2024
- Genesis
Table of Contents
GETTING STARTED GUIDE
GENESIS G80
GETTING STARTED GUIDE
AUDIO, CONNECTIVITY, AND NAVIGATION
Thank you for joining the Genesis family. This easy-to-follow guide will show you how to use various Genesis G80 features and how to adjust their settings to your preferences. We hope you enjoy the distinctive luxury of a customized and convenient ownership experience.
Main menu
PHONE PROJECTION
Android Auto™ and Apple CarPlay® allow you to access the most commonly used smartphone features, including calling, navigation, text messaging, and playing music all from your driver’s seat.
ANDROID AUTO APPLE CARPLAY
1. ‘Connect’ a USB data cable from your phone to the vehicle’s USB port.**
ANDROID AUTO APPLE CARPLAY
2. ‘Allow permission’ from your phone to connect to your vehicle.
Please note that your phone must be unlocked.
ANDROID AUTO APPLE CARPLAY
3. Enjoy using the applications displayed on your vehicle’s multimedia screen.
Note
Android Auto users will be prompted to view a tutorial.
Select your option and proceed.
- For illustration purposes only.
**USB data port will typically be located in or near the front in-dash console. Check your vehicle’s owner’s manual for specific location. Data cable for iOS device is required for Apple CarPlay. OEM data cables are recommended. Apple CarPlay is a registered trademark of Apple Inc. Android Auto is a trademark of Google LLC.
PHONE PAIRING
1. The vehicle’s shifter must be in ‘Park.’
Then press the ‘Setup’ button.
2. Select ‘Device Connection’ on the screen.
3. Press ‘Add.’
Note
Bluetooth settings can be found in the ‘Settings’ app on most smartphones. Refer to your phone’s owner’s manual or visit GenesisBluetooth.com for more information.
4. Turn on your phone’s ‘Bluetooth,’ select the device (G80) found by your phone, and follow any additional prompts on your phone.
Depending on the phone manufacturer and model:
— Some phones may request approval to download contacts; this process will take a few minutes
— Contact list may start with First or Last Name, depending on phone models
— Some phones may require additional confirmation to allow contacts to sync
Note
If your phone is supported, then your contact list may be transferred to your vehicle automatically.
CUSTOM BUTTON
INITIAL SETUP
The Custom Button ( ) is easy to set up and use so that you can enjoy your favorite features with just a touch of a button. Learn how to set up your Custom Button by reviewing the steps below.
1. Press the ‘Custom Button.’*
2. Select from the listed options** to set as your custom button.
For example, select ‘Phone.’
- Button location may differ from the image shown.
**Listed options may differ from the image shown.
MAKING A CALL
BY VOICE COMMANDS USING BLUETOOTH
BEFORE YOU START
Make sure your phone is connected to your vehicle and your phone contacts have been downloaded to the vehicle. If this has not been done, please follow the instructions on page 4.
1. Press the ‘Push to Talk’ button on the steering wheel.
You will hear “Please say a command,” followed by a beep.
2. After the beep, say the command “Call” followed by the name of the desired
contact.
Example: “Call Alex”
3. If the contact has multiple phone numbers, you can select the phone number you would like to call by saying “One” or “Two.”
BY VOICE COMMANDS USING BLUETOOTH
4. The selected number will be dialed and your contact’s name and phone number will appear on the screen.
5. To end the call, press the ‘Call’ button located on the steering wheel.
COMMON VOICE COMMANDS
To enable voice command, press the ‘Push to Talk’ button located on the steering wheel.
HERE ARE A FEW COMMON VOICE COMMANDS TO USE AFTER YOUR PHONE HAS BEEN PAIRED:
“Help” provides guidance on commands that can be used within the current function.
Say “Call” to initiate a call followed by saying the name of the saved contact with whom you wish to speak. For example: “Call John Smith.”
“Dial” makes a call by dialing the spoken numbers.
For example: “Dial 1-800-633-5151.”
Note
Compatibility and performance may vary based on your phone, the phone’s software, and your wireless carrier.
NAVIGATION
FINDING A DESTINATION USING VOICE COMMANDS
1. Press the ‘Push to Talk’ button located on the steering wheel.
You will hear “Please say a command,” followed by a beep. After the beep, say
the command “Find Coffee Shop.”
2. The results will be listed on the screen.
Say the line item number (for example: “Three”) to make your selection.
3. Select either the recommended or alternate route. The destination route will display on the screen and route guidance will begin.
4. Press the ‘Push to Talk’ button located on the steering wheel and say “Cancel Route” to stop route guidance.
INPUTTING A DESTINATION
1. The vehicle must be in ‘Park.’*
Press the ‘Nav’ button.**
2. Select ‘Search.’
3. Enter the address of your destination or the name of your POI and press the ‘Search’ icon.
4. The route to your destination will be displayed on the map.
Select ‘Set as Destination’ to begin your route.
5. Press the ‘Push to Talk’ button located on the steering wheel and say “Cancel Route” after the prompt to stop route guidance.
*Manual destination input is only available when the vehicle is in ‘Park.’
**Button location may differ from the image shown.
COMMON VOICE COMMANDS
To start voice command, press the ‘Push to Talk’* button located on the steering wheel.
HERE ARE A FEW COMMON VOICE COMMANDS AVAILABLE TO USE:
“Help” provides guidance on commands that can be used within the current function.
Say “Find
” to search for an address and set it as a destination.For example: “300 (Three-Zero-Zero) Main Street, Fountain Valley.”
“Find
For example: “Find Banks.”
“Go Home/To Work” sets the destination to your home or work/office.
Your home or work address must be set in the navigation system.
“Cancel Route” cancels the route to the set destination and exits guidance.
“Police Station/Hospital” displays a list of the nearest police stations or hospitals.
*The display, button, and/or icon locations may differ from the images shown.
DYNAMIC VOICE RECOGNITION
Your Genesis is equipped with Dynamic Voice Control, which allows you to use voice commands to control your vehicle’s windows, climate, radio, navigation, and more. Additional POI and Internet search functions are available with a GCS subscription. To explore these commands, follow the instructions below.
1. Press the ‘Push to Talk’ button.
2. Select ‘Help’ on the lower left corner of the screen.
3. Select a category to see a list of commands that are available to use.
DYNAMIC VOICE RECOGNITION FEATURES INCLUDE:
— Phone Change Bluetooth device, make calls, and dial by number.
— Radio Tune to FM/AM, SiriusXM, or to a custom channel.
— Vehicle Controls Commands for climate controls, liftgate, seat, window, and steering wheel.
— Navigation Search for and find addresses located in the state or
province your car is currently in.
Navigate to saved places, access traffic information, turn guidance off, etc.
— Setting Search Search for certain vehicle setting screens based on a voice command.
— HOUNDIFY Access information on weather, sports, date/time, and stocks.
DUAL VOICE RECOGNITION
Follow these simple instructions to toggle between your vehicle’s voice recognition and Android Auto’s or Apple CarPlay’s voice recognition.
Genesis Voice Recognition:
Press the ‘Push to Talk’ button and say a command.
ANDROID AUTO APPLE CARPLAY
Android Auto or Apple CarPlay:
First, make sure your phone is connected to Android Auto or Apple CarPlay.
Then hold down the ‘Push to Talk’ button until prompted by Android Auto or
Apple CarPlay to provide a command.
Long-Press vs. Short-Press Voice Recognition
— Long press of ‘Push to Talk’ button triggers phone projection voice recognition by Siri or Google Voice
— Short press of ‘Push to Talk’ button triggers built-in phone projection voice
- For illustration purposes only.
MAP DISPLAYS
Customize the way that your Genesis displays maps by following the steps below.
1. Press the ‘Map’ button.
2. Tap ‘Menu’ in the lower left corner.
3. Checking ‘Display Traffic’ will show traffic conditions on your map.
4. Select ‘Navigation Settings’ to modify additional settings.
5. Select ‘Navigation Settings,’ then select ‘Map.’
6. Select each category on the menu to set your map preferences.
ADVANCED DRIVER
ASSISTANCE SYSTEMS
Your Genesis is equipped with Advanced Driver Assistance Systems* to help you along the way. To access the settings for these features, follow the instructions below.
1. Press the ‘Setup’ button.
2. Select ‘Vehicle.’
Then select ‘Driver Assistance.’
3. Select a feature on the menu to set its properties.
ADVANCED DRIVER ASSISTANCE SYSTEMS INCLUDE:
– Smart Cruise Control – Driver Attention Warning
– Driving Convenience – Forward Safety
– Warning Timing – Lane Safety
– Warning Volume – Blind-Spot Safety
– Haptic Warning – Parking Safety
*The Advanced Driver Assistance System warning and alerts only serve to inform the driver of potential hazards. They do not detect and provide an alert in every situation. It is the driver’s responsibility to remain alert at all times. See Owner’s Manual for details and limitations.
NEW FEATURES
Highway Lane Change Assist
The Lane Change Assist function automatically helps with steering to help
prevent the vehicle from leaving the lane.
Intelligent Speed Limit Assist (ISLA) (if equipped)
The Intelligent Speed Limit Assist uses information from the detected road
sign and navigation system to inform the driver of the speed limit and
additional information of the current road. It also helps the driver maintain
within the speed limit of the road by adjusting the vehicle’s speed.
Refer to your owner’s manual for more detailed information on these new
features.
CONTROL KNOB
NAME AND FUNCTION OF EACH COMPONENT
FRONT SEAT CONTROL KEYS
The image of this product may be different from the actual product.
[1] /VOL wheel button
- Press briefly to turn AV on/off.
- Press and hold to turn on or out the display and AV.
- Turn the wheel up/down to adjust the volume.
[2] BACK button
- Press briefly to move to the previous screen.
- Press and hold to go to the home screen.
[3] HOME button
- Press briefly to go to the home screen.
- Press and hold to go to the map screen.
[4] TUNE wheel button
- Radio mode: Turning the wheel up/down to increases/decreases the frequency by one step. (FM: 0.2MHz, AM: 10Khz)
- SXM mode: Turning the wheel up/down to increases/decreases the channel by one step.
- USB/Sounds of nature/Voice memo/ Bluetooth audio mode: Search for a file by turning the wheel up/down. And, when the name of desired file is displayed, press the button to play the file.
- Rotate the wheel up/down to change the map scale on the map screen.
- Navigation: Turn up/down to change the map scale on the map screen.
[5] MENU button
- Displays a pop-up menu for each mode when pressed briefly.
- Turns on and off the split screen on the map when pressed and held.
[6] Controller
- Use controller to move and select the menu.
- Rotate the controller to change the map scale on the map screen.
USING CONTROLLER AND TOUCHPAD
Rotate controller to left/right or use touchpad to switch or select the menu.
| Controller | Details |
|---|---|
| Rotate controller to left/right to switch the menu. | |
| Swipe up/down/left/right to switch the menu. | |
| Press touchpad to select the menu. |
Write the desired words or gesture on the touchpad.
| Push controller to up/down/left/right/diagonal directions to switch the
menu.
VOLUME CONTROL
RADIO/MEDIA VOLUME CONTROL
When radio/media is in play, turn [ ****/VOL] the wheel up/down on the front seat control key to control the volume.
BLUETOOTH AUDIO VOLUME CONTROL
When Bluetooth audio is in play, turn [ ****/VOL] the wheel up/clown on the front seat control key to control the volume.
VOICE RECOGNITION GUIDE VOLUME CONTROL
When voice guidance is in play, turn [ ****/VOL] the wheel up/down on the front seat control key to control the volume.
BLUETOOTH PHONE VOLUME CONTROL
During Bluetooth phone call, turn [ ****/VOL] the wheel up/down on the front seat control key to control the volume.
TURNING AV OFF
Press [ ****/VOL] the wheel on the front seat control key when the AV is ON.
TURNING AV ON
Press [ ****/VOL] the wheel on the front seat control key when the AV is OFF.
HOME BTN (BY CONTROLLER)
This menu is used to set the function to be activated when the [NOME) button is pressed briefly.
-
On the button/touch pad settings screen, press the [Home Btn (by Controller)].
-
Press the desired item.
TURNING THE SYSTEM OFF
Press and hold [ /VOL] the wheel on the front seat control key.
To turn the system on again, press [ /VOL] the wheel on the front seat
control key.
NOTE
Check the volume when turning on the system. Before tuning on the system,
adjust the volume to a reasonable level.
ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>