Altronix PD8ULCB UL Listed Sub-Assembly Power Distribution Module User Manual

June 8, 2024
Altronix

Altronix logo PD8ULCB
UL Listed Sub-Assembly Power Distribution Module
User Manual

Overview:

PD8ULCB is a UL Listed Sub-Assembly power distribution module designed to convert a single AC or DC input into eight (8) PTC protected Class 2 Rated power-limited auto-resettable outputs.

Specifications:

Agency Listings:
• UL Listed Sub-Assembly for
SECURITY SIGNALIHG
UL 294* Access Control System Units.
*Access Control Performance Levels: Destructive Attack – N/A (sub- assembly); Endurance – IV; Line Security – I; Stand-by Power – I.
UL 603: Power Supplies for Use with Burglar Alarm Systems.
UL 1481: Power Supplies for Fire Protective Signaling Systems.
• cUL Listed:
General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983.
Power Supplies for Burglar Alarm Systems ULC-S318-96.
Input:

  • 12VDC or 24VDC, up to 10A.
  • 24VAC or 28VAC, up to 12A.

Outputs:

  • Four (4) individually fuse protected outputs @ 2.5A per output max. current (total output current should not exceed max. current rating of power supply employed).

Fuse Ratings:

  • Fuses are rated @ 3.5A/250V.

Visual Indicators:

  • Power On green LED indicator.

Board Dimensions (W x L x H approximate):
3.25” x 5.25” x 1” (82.6mm x 133.4mm x 25.4mm).

Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only and should be installed by qualified personnel.

  1. Refer to Sub-Assembly Installation Instruction for mounting Rev. MS020119.

  2. Mount PD8UL in the desired location/enclosure (mounting hardware included).

  3. Connect the desired power supply output to the terminals marked [INPUT] (Fig. 1).
    Note: Left terminal is NEG. (–) and right terminal is POS. (+) (Fig. 1).

  4. Measure output voltage before connecting devices. This helps avoiding potential damage.

  5. Connect devices to be powered to the terminal pairs 1 to 4, marked [1P – 1N] through [4P – 4N].
    All terminals with common suffix P “1P, 2P…” are the same polarity.
    Note: This product is a UL Listed Sub-Assembly for use with Altronix UL Listed power supplies as indicated in the installation manuals for the power supply.

NOTE: DC outputs are power-limited only if a power-limited power supply is employed.
CAUTION: To avoid risk of electric shock or fire hazard replace fuses with the same type and rating, 3.5A/250V.
Do not expose to rain or moisture.
(#P) Positive DC outputs
(#N) Negative DC outputsAltronix PD8ULCB UL Listed Sub Assembly Power
Distribution Module - FigAltronix is not responsible for any typographical errors.

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com
e-mail: info@altronix.com
Lifetime Warranty
IIPD8UL – Rev. 020119
D12U

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Altronix User Manuals

Related Manuals