KeTeR 17190655 Magic Villa House User Manual
- June 8, 2024
- Keter
Table of Contents
Create amazing spaces
MANUAL MAGIC VILLA HOUSE
ASSEMBLY INSTRUCTIONS
IMPORTANT! PLEASE READ CAREFULLY! RETAIN FOR FUTURE REFERENCE. NOTES AND
WARNINGS – PLEASE READ CAREFULLY PRIOR TO ASSEMBLY.
CHILDREN’S PLAYHOUSE. A play product intended for children over 2 years of age
Dimensions
Only for
domestic use. Cleaning: lukewarm water with the addition of detergent and a
soft cloth. Place and assemble on an even, hard and non-slippery surface.
Accessories not included.
All weather design.
BEFORE STARTING ASSEMBLY
Read the care and safety guidelines at the end of this manual. Check to ensure
that there are no missing or damaged parts BEFORE starting or arranging
assembly. Review all assembly instructions. Assemble all the parts according
to the directions in this manual. Do not skip any steps.
ASSEMBLY PARTS
Remove all parts from the package(s) and spread them out on a clean work surface. Code letters are imprinted on each part for easy identication.
ASSEMBLY INSTRUCTIONS
SAFE USE PRINCIPLES: The product may be assembled, disassembled and maintained solely by an adult. The product includes small parts that may be a potential choking hazard for children under 3 years of age. Always check the product safety, stability and correct assembly before use. Never leave a child unattended. Playing children must be always supervised by an adult. Do not allow children to play in dangerous places and in places deemed to be inadequate to play with such toys, e.g. close to decks, roofs, stairs, etc. The product must be put up on levelled, non-slippery surface, at least 2 m away of any other object or obstacle, e.g. fence, garage, pipeline, electric wires, hanging branches, etc. • Avoid open fire and other sources of extreme heat, such as grill or the like, close to the place of children’s play. Do not put up the toy close to slopes, steps, water bodies, streets or other hazards. Do not place the product on concrete, asphalt or any other hard surface. Outdoors the toy must be put up on a lawn or on a similar soft surface. For fixing, ground anchors may be used, which should be placed at or below the ground level in order to reduce the risk of the toy falling over. Do not use the toy in strong wind. The playing children and the toy must be protected against excessive sun exposure. After assembly completion, check whether all parts have been properly inserted in the connecting elements in accordance with the assembly instruction. Regularly check the correct assembly of the playhouse and tighten the screws if needed. Regularly control the technical condition of the parts. If any of the parts is damaged or has sharp edges, do not use the product by the time the defects have been removed or the parts have been replaced with new ones. The toy may be dangerous if the control is neglected. The product is resistant to weather conditions. Made of durable polypropylene, recyclable. In the case of inquiries contact the Distributor’s Customer Service Department.
Producer/Distributor
www.keter.com
www.keter-lifestyle.com
service.poland@keter.com
service.hungary@keter.com
service.nordic@keter.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>