ZKTeco IWBA01 Movable Stand Installation Guide
- June 8, 2024
- ZKTECO
Table of Contents
ZKTeco IWBA01 Movable Stand Installation Guide
- To ensure correct and safe use, please read this manual carefully before installation.
- This model is recommended to be equipped with 55 to 86-inch interactive whiteboard.
- Maximum bearing weight can support up to 100KG
Packing List
Cross-slot Recessed Hexagon Head Screw| M8×25mm| 14pcs|
---|---|---|---
M12 Spring Cushion| ∅20×∅13mm| 4pcs|
M6 Screw*| M6×130mm| 2pcs|
Phillips Screwdriver (Prepared by the user)| ——–| 1pc|
Adjustable Wrench (Prepared by the user)| ——–| 1pc|
Installation
Adjust the caster to the brake state and screw it into the brackets (as in Figure 1 ).
Attach the Wall Bracket to the Left Bracket (as in Figure 2), 3 sets of mounting heights (1 and 4, 2 and 5, 3 and 6), optional according to demand.
Attach the Right Bracket to the other end of the Wall Bracket (as in Figure 3).
Installing the Tray between the two bracket(as in Figure 4).
Fasten the Wall Hanging Bar to the whole machine as needed (as in Figure 5).
Hang the assembled whole machine onto the Wall Bracket and lock the safety
screw of the Wall Hanging Bar (as in Figure 6).
Make sure the brakes are locked, this step requires at least 2 professionals
to complete.
Refer to the following picture for the fnished product.
REMARKS:
When the interactive whiteboard with its own hanging bar cannot be etectively
matched to the tripod, you should modify together with the wall mount plate,
as shown below.
Attach the wall mount plate on the wall bracket.
Hang the interactive whiteboard on the wall mount plate and lock the safety bolt
ZKTECO CO.,LTD. www.zkteco.com
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan,
China.
Phone: +86 769 – 82109991
Fax: +86 755 – 89602394