Lenovo thinkplus LivePods LP1 Earbuds User Manual

Lenovo thinkplus LivePods LP1 Earbuds

Usage Instruction

1. Don’t attempt to disassemble the unit and change any part, except there is operation method mentioned in the manual.
2. Don’t expose the unit to liquid, moisture or humidity, since it is not a waterproof product.
3. Disconnect the unit with your BT device and move it to the safe area if the liquid get inside the unit.
4. Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
5. Don’t expose the unit to extremely high temperature or dispose of the unit in fire as it will result in an explosion.
6. Don’t place the unit in an electromagnetic interference environment to avoid malfunction.

Packing list

Product schematic description

Product specification

• BT Version: V5.3
• Transmission distance: ≥10M
• Battery capacity: 30mAh
• Playing time: About 4 hours (headphone)
• Charging time: About 1 hours (headphone)
• Rated input: 5V 30mA

Charging case specification

• Battery capacity: 230mAh
• Charging time : About 1.5 hours
• Rated input : 5V 230mA
  (All technical information is subject to actual performance)

To Charge the case

• Connect the Type-C cable to the 5V power adaptor, and another end to the charging port of the Charging Case.
• Connect the Type-C cable to the 5V power adaptor, and another end to the charging port of the Charging Case.

**LED Indicator Status

**

Case LED Indicator:

• Charge the charging case (not fully charged): The indicator light will be flash in red.
• The charging case is fully charged: The indicator light will keep on.

Case LED Indicator

• Low power of charging case : The indicator light flashes red.
• The headphones are not fully charged: The indicator will stay in white.
• ully charged the headphones: The indicator light is turn off.

Product operating instructions

1. Power on:
   • Method 1: Open the case, the headphones will turn on automatically. Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones.
2. Power off
   • Method 1: Put the headphones into the charging case directly and close the case to turn off.
   • Method 2: Long touch the MF button of the headphones for 5s to turn off the headphones.(The headphone is not connected to the BT device)
3. Pairing to the BT device
   • Step 1: open the upper cover of the charging case, and the main and auxiliary headphones will automatically connected;
   • Step 2: open the BT list of smart devices, search thinkplus-LP1″ and Connect (single ear use is supported).

Touch control button operating

Music playing mode

• Left/Right headphone operating

Hands free function

• Left/ Right headphone operating ( incoming call)

Active the voice assistant function (the smart devices support voice assistant function)

• Left/ Right headphone operating

Restore factory settings

When you turn on the headphones, make sure it does not connect to any BT device, and click the MF button 5 times to clear the pairing record, then turn off the headphones.

Name and content of hazardous substances in products Name and content of hazardous substances in products

Part Name

| Harmful materials

Pb         Hg        Cd      Cr(VI)        PBB PBDE

---|---
Printed circuit assembly

Small structural parts such as shell

This form is compiled in accordance with SJ/T 11364.

：Indicates that the content of the hazardous substance in all homogeneous materials of the part is in Below the limit

requirements specified in GB/T 26572.

：Indicates that the content of the hazardous substance in at

least one of the homogeneous materials of the part exceeds

The limit requirements specified in GB/T 26572.

The parts marked with “X” on the form are all harmful due to the limitations of global technological development.Substitution of substances.

Printed circuit board components*: including printed circuit boards and their parts, electronic components, etc.,Depending on the product model, the product you purchased may not contain all the above components
 | Electronic and electrical products sold in the People’s Republic of China must mark this Logo, the number in the logo represents the product under normal use Environmental protection use period.

Warranty statement

Disclaimer
This user manual does not have any form of guarantee, position expression or other implication.The mentioned products, specifications and information are for reference only, and the content will also be updated on the webpage at any time, without additional line notification.

Warranty statement
The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase
(“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired free; if the manufacturer confirms that it cannot be repaired, free replacement; repaired or replaced product, Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchase date by sale The ticket date shall prevail; if the purchase date cannot be determined, the warranty period shall be 13 Months calculation.
If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us.
When applying for warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice. The above guarantee does not apply to the following situations:

1. The validity period of the three packs is exceeded;
2. Alteration of the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storageimpaired or damaged;
4. Failure or damage caused by force majeure (such as earthquake, war, fire, etc.) or accident bad;
5. The zipper and buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp objects;
8. Products with signs of burning or water immersion;
9. Damage caused by unauthorized disassembly;
10. Aging, discoloration, abrasion, rupture and other losses occurred during normal use of the product.
11. If the original identification label of the product is changed or  damaged, this guarantee will become invalid. The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should Check on the spot and raise objections to any discrepancies.
    • The above guarantees are all guarantees we make regarding the products, and are only applicable in mainland China.
      Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.

After-sales service Emal: frank@szeysan.cn
Service supervision hotline: 400-812-0102

LENOVO THINK: PLUS belongs to affiliated enterprises of Lenovo Group.
Mentioned other trademarks, company names, products or services’name may be a trademark of affiliated enterprises of Lenovo Group or another company.
Copyright 2022 Lenovo Group and its licensors. All rights reserved.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisi on reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.

Operation is subject to the following twoconditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC ID： 2A8SE-22090002
Please read all instructions carefully and retain for future use

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>