SILVERCREST SLR 30 B1 Air Purifier Instruction Manual

**

SILVERCREST SLR 30 B1 Air Purifier**

Congratulations!
By purchasing the SilverCrest SLR 30 B1 air purifier, hereinafter referred to as the ‘air purifier’, you have opted for a high-quality product.
Familiarise yourself with the air purifier before using it for the first time and read this operating manual carefully. Observe the safety instructions and only use the air purifier in the manner described in this operating manual and for the indicated fields of application.
Keep these operating instructions in a safe place. Hand over all documents in the event that you pass on the air purifier to a third party.

Intended use

This air purifier is to be used expressly for air purification in closed rooms and should not be used in tropical climates. This air purifier is not intended for business or commercial use. Use the air purifier solely for private purposes in living areas; any other use is deemed improper. This air purifier meets all requirements of all relevant standards related to CE conformity. Compliance with these standards is no longer guaranteed if a change is made to the air purifier without the authorisation of the manufacturer. The manufacturer shall not be liable for any damages or faults arising as a result. Only use the accessories specified by the manufacturer.
Please observe the national regulations and/or laws of the country in which the device is used.

Package contents

• SilverCrest air purifier SLR 30 B1
• This operating manual

Overview

This operating manual also has a cover that can be unfolded. The inside of the cover provides a schematic of the air purifier and a numbered legend. The numbers identify the following parts/functions:

Technical data

Input voltage| 220 V–240 V ~ , 50 Hz|
---|---|---
Power consumption| 30 W
Protection class| II
Dimensions (W x H x D)| Approx. 21 x 29.5 x 21 cm
Weight| Approx. 2340 g

The specifications and design are subject to change without notice.

Safety instructions

Before using the air purifier for the first time, please read the following instructions carefully and observe all warnings, even if you are familiar with using electronic devices. Keep this operating manual in a safe place for future reference. If you sell the air purifier or give it away, please pass on this manual.

DANGER! This warning indicates a hazard involving a high level of risk, which if not avoided, may result in severe injury or death.
WARNING! This warning indicates a hazard involving a medium level of risk, which if not avoided, may result in severe injury or death.
CAUTION! This warning indicates danger involving a low level of risk, which if not avoided, may result in minor or moderate injury.
CAUTION! This warning indicates important information for protection against damage to property.
This icon gives you further information on the topic.
DANGER! This icon indicates hazards to health and/or property posed by an electric shock, potentially including risk of death.
Use only in dry, indoor rooms
AC voltage
Read the operating manual
Protection class II

DANGER! Personal safety

• This air purifier can be used by children aged eight and over as well as by people with reduced physical, sensory or mental abilities or who lack experience and knowledge, provided they are supervised or have been instructed in the safe use of the air purifier and understand the resulting dangers.
• Children must not play with the air purifier.
• Cleaning and user maintenance must not be carried out by children unless they are supervised.
• Keep the packaging film away from children. Risk of suffocation.

DANGER! Risk of electric shock!

• To completely disconnect the air purifier from the mains, remove the plug from the socket.
• Protect the product from moisture and humidity as well as from dripping or splashing water. Never immerse the product in water or any other liquid!
• Should liquid enter the product, immediately remove the plug from the socket. Have the product examined by a qualified specialist before using it again.
• Do not handle the product with wet or damp hands.
• Do not reach for the product if it is in water or any other liquid. In such cases, immediately remove the plug from the socket.
• Do not use the product if the plug or the connecting cable are damaged, if it does not operate as intended, if it has been dropped on the floor or in water or if it exhibits any other damage. In such cases, contact a qualified specialist for repair.
• Only connect the plug to a socket that has been properly installed, is easily accessible and the mains voltage of which corresponds with the information specified in the ‘Technical data’ section. The socket must continue to be easily accessible after the plug has been connected.
• Ensure that the connecting cable cannot be damaged by sharp edges or hot surfaces.
• When using the product, ensure that the connecting cable is not pinched or crimped.
• The product is also not fully disconnected from the mains once it has been switched off. Remove the plug from the socket to fully disconnect it from the mains. Always pull on the plug to remove it from the socket; never pull on the cable (10).
• Remove the plug from the socket
  • if a fault occurs
  • if you are not using the product
  • during assembly
  • when changing the filter
  • before cleaning the product
  • during thunderstorms
• Do not attempt to repair the product yourself. In the event of a defect, switch the product off, remove the plug from the socket and contact our service department.
• If this product’s connecting cable is damaged, it must be replaced by the manufacturer, their service department or a similarly qualified person in order to prevent any hazards.

WARNING! Risk of injury!

• Only use the original accessories provided by the manufacturer.
• Do not stick fingers or objects in the air inlet opening (7) or the air outlet openings (5), and do not use the device when these openings are blocked.
• Keep these openings free of dirt, fuzz, hair and anything that could hinder the air circulation.
• Do not use the product near explosive or flammable materials.
• Keep hair, clothing, and other objects clear of the protective grill while it is in operation.
• Do not move the product while it is operation.

CAUTION! Damage to property!

• This product is not intended for operation with an external timer or a separate remote-control system.
• Keep doors and windows closed during operation to guarantee effective function of the device.
• Only use the device in rooms with a maximum area of 15 m² and a maximum height of 2.4 m.
• To avoid impairing the function of the device, never cover it with covers, pillows, newspapers or similar objects.
• Never place the product on hot surfaces (e.g., hobs) or near sources of heat or open flames.
• Only use the original accessories.
• Do not hang or mount the product to the ceiling or wall.
• Only operate the product on a flat, stable surface.
• Never operate the product near highly flammable materials, such as curtains, drapes and so on. Keep the product at least 50 cm away (in every direction) from flammable and combustible materials.
• Do not leave the device unattended during operation.
• Do not expose the device to sources of direct heat (for example, heaters), direct sunlight or strong artificial light.
• Avoid contact with splashing and dripping water as well as aggressive liquids. Do not operate the product near water. In particular, the product must never be immersed (do not place any objects filled with liquids, e.g., vases or drinks, on the product).
• Also make sure that the product is not exposed to excessive shocks and vibrations. Furthermore, no foreign bodies should penetrate the device.

Copyright

All contents of this operating manual are subject to copyright law and are provided to the user solely as a source of information. Any form of copying or reproduction of data and information without the express written permission of the author is prohibited. This also concerns commercial use of the content and data. The text and illustrations correspond to the technical standards at the time of printing. Subject to alterations.

Before initial use

Unpacking

• Take the product out of the packaging.
• Completely remove all packaging materials.
• Check the package contents for completeness. Contact Service immediately in case of missing components.

CAUTION! Material damage!

The filter (8) inside of the device is packed in an additional plastic bag. Make certain to remove the plastic bag before using the device for the first time. Refer to the ‘Changing the filter’ section.

How the air purifier works

• An internal fan draws ambient air into the device through a high-quality filter (8).
• The filter (8) removes particles, such as household dust, pollen, mould spores, smoke and so on, from the air, resulting in a significant reduction of said particles in the ambient air. The activated carbon filter contained within the filter (8) minimises and neutralises odours.
• The device has a timer function that switches it off automatically and a sleep mode for quiet operation at night.
• The ion function electrically charges (ionises) air particles (atoms and molecules) inside of the air purifier and then releases them into the ambient air using the fan.
• Oppositely charged ions and particles in the air cling to each other, which makes them fall to the ground more easily, thereby stopping them from floating about in the
• ambient air.

Initial use

A plastic odour may occur within the first hours of initial use. The manufacturer is aware of this odour; it not harmful to health and will cease after a certain period of operation.

Visual indicator for ambient air quality via the LED ring light (12)

The control panel (1) is surrounded by an LED ring light (12). The LED ring light illuminates in different colours to indicate the amount of dirt particles in the ambient air.

Button functions

The functions of the buttons/indicators on the control panel (1) are shown in the table below

Switching the air purifier on/off

• Insert the plug into an easily accessible socket. A beep will sound, and every indicator on the control panel (1) as well as the LED ring light (12) will illuminate for a moment. The air purifier is now in standby mode and the ON/standby button (4) maintains a continuous, faint glow.

• To switch on the air purifier, briefly press the ON/standby button (4). A beep will sound, and the activated buttons/functions will illuminate brightly, while the inactive buttons/functions will glow faintly.
  The air purifier will retain the settings that were previously selected when it is switched back on provided that the air purifier was not disconnected from the mains in the meantime. To change the settings of each function, press the corresponding button (2, 13, 14) once or multiple times.

• To switch the air purifier to standby mode, briefly press the ON/standby button (4) again. A beep will sound. The air purifier is now in standby mode and the ON/standby button (4) will maintain a continuous, faint glow.

Activating/deactivating the ion function

• During operation, press the ion function button (13) to activate or deactivate the function.

Fan functions

You can use the fan function button (14) to cycle through the fan’s four settings. Press the fan function button (14) repeatedly until the desired setting is displayed.

• ‘Auto’: Automatically adjusts the fan speed and air flow rate to the current ambient air quality.
  Ambient air quality| LED ring light indicator colours (12)| Fan speed
  ---|---|---
  good| green| minimum
  moderate| yellow| low
  poor| red| high
• ‘High’: High fan speed and maximal air flow. The LED ring light (12) will illuminate.
• ‘Low’: Low fan speed and minimal air flow. The LED ring light (12) will illuminate.
• ‘Sleep’: Minimum fan speed, minimal air flow and minimal noise. The LED ring light (12) will not illuminate. The ion function cannot be activated in this setting.

Activating/deactivating the timer function
The timer allows you to pre-set the air purifier’s operating time to 1, 2, 4 or 8 hours. After the set time elapses, the air purifier will automatically enter standby mode.

• During operation, press the timer button (2) once or multiple times to activate or deactivate the function and the desired length of operation. The time selected will illuminate on the control panel (1) next to the timer button (2).
• To deactivate the timer, press the timer button (2) repeatedly until the operation time indicator turns off.

The air purifier will retain all selected settings when it is switched off and resume those settings when it is switched back on. When the air purifier is disconnected from the mains, the settings that were previously selected will be lost.

Cleaning/maintenance

Cleaning

DANGER! Risk of electric shock!
Disconnect the air purifier from the mains before each cleaning. Do not immerse the fan in water.
Do not allow any water or cleaning agent to enter the air purifier.

• Only clean the air purifier using a clean, slightly damp cloth. Never use aggressive liquids.
• Put some mild washing-up liquid on the damp cloth for stubborn stains.
• The air outlet openings (5) and air inlet openings (7) should be cleaned regularly using a soft-bristled brush in order to remove dust and soiling.
• The particle sensor (11) is maintenance-free and does not need to be cleaned. To guarantee perfect functionality, regularly remove dust and impurities from the opening in front of the particle sensor (11) using a soft-bristled brush.

Maintenance

Changing the filter

The filter (8) has a service life of approx. 2,000 hours of operation. The service life varies based on the operating environment. The change filter button (3) will blink as soon as the filter (8) has reached the end of its service life. Change the filter (8) promptly when this happens to restore the air purifier to perfect working order.

DANGER! Risk of electric shock!

Disconnect the air purifier from the mains before each filter change.
To change the filter, proceed as follows:

• Switch off the air purifier and remove the plug from the socket.
• Turn the air purifier upside down to access the cover (9).
• Turn the cover (9) approx. two centimetres clockwise in the direction of the open lock (see illustration) and remove the cover (9).
• Remove the used filter (8) by pulling it out of the air purifier’s device housing (6).
• Insert a new filter (8).
• Replace the cover (9) noting the recesses on the edge of the cover opening. Lock the cover (9) into place by turning it approx. two centimetres anticlockwise in the direction of the locked lock (see illustration).
• Hold the filter change button (3) for three seconds to confirm the filter change and reset the timer. A beep will sound and the filter change button (3) will blink three times before turning off.

Ordering replacement parts

The filter (8) is subject to wear and is not covered by the guarantee. You can order a new filter (8) online from the following website: shop.targa.de

Storing the device when not in use

If you do not use the air purifier for a long period of time, clean it as described in the ‘Maintenance/cleaning’ section and store it in a safe, dry and clean place.

Troubleshooting

If your air purifier does not work as it usually does, use the following instructions to try and solve the problem first. If working through the following tips does not eliminate the fault, please contact our hotline.

The air purifier is not working

• The plug is not inserted. Insert the plug into the power socket.
• The power socket is faulty. Try the air purifier in another socket that you know definitely works.

The filter change button (3) is blinking although the filter (8) was changed

• The filter timer was not reset. Hold the filter change button (3) for three seconds to confirm the filter change and reset the timer. A beep will sound and the filter change button (3) will blink three times before turning off.

Environmental and waste disposal information

Marks of conformity

This product meets the requirements specified in applicable European and national regulations. This product’s conformity has been verified.
The declarations and documents are stored with the manufacturer.
This product fulfils the requirements specified in the applicable national policies for the Republic of Serbia.
This product meets the requirements specified in the applicable national policies for the United Kingdom.

You can download the full EU declaration of conformity at the following link: https://www.targa.gmbh/downloads/conformity/387759_2104.pdf

Warranty information

Warranty of TARGA GmbH
Dear Customer,
This device is sold with three years warranty from the date of purchase. In the event of product defects, you have legal rights towards the seller. These statutory rights are not restricted by our warranty as described below.

Warranty conditions
The warranty period commences upon the date of purchase. Please keep the original receipt in a safe place as it is required as proof of purchase. If any material or manufacturing faults occur within three years of the purchase of this product, we will repair or replace the product free of charge as we deem appropriate.

The warranty period and legal warranty rights
The warranty period is not extended in the event of a warranty claim. This also applies to replaced and repaired parts. Any damage or defects discovered upon purchase must be reported immediately when the product has been unpacked. Any repairs required after the warranty period will be subject to charge.

Scope of warranty
The device was carefully manufactured in compliance with stringent quality guidelines and subjected to thorough testing before it left the works. The warranty applies to material and manufacturing faults. This warranty does not cover product components which are subject to normal wear and which can therefore be regarded as wearing parts, or damage to fragile components such as switches, rechargeable batteries or components made of glass. This warranty is void if the product is damaged, incorrectly used or serviced. To ensure the correct use of the product, always comply fully with all instructions contained in the user manual. The warnings and recommendations in the user manual regarding correct and incorrect use and handling of the product must always be observed and complied with. The product is solely designed for private use and is not suitable for commercial applications. The warranty is rendered void in the event of incorrect handling and misuse if it is subjected to force, and also if any person other than our authorised service technicians interferes with the device. No new warranty period commences if the product is repaired or replaced.

Submitting warranty claims
To ensure the speedy handling of your complaint, please note the following:

• Before using your product for the first time, please read the enclosed documentation carefully. Should any problems arise which cannot be solved in this way, please call our hotline.
• Always have your receipt, the product article number as well as the serial number (if available) to hand as proof of purchase.
• If it is not possible to solve the problem on the phone, our hotline support staff will initiate further servicing procedures depending on the fault.

Service

Phone: 0800 404 7657
E-Mail: targa@lidl.co.uk

Manufacturer
Please note that the following address is not a service address. First contact the service point stated above.

TARGA GmbH Coesterweg 45 59494 Soest GERMANY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>