HAGOR 3236 CPS-Fixed Arms VESA 200 Instruction Manual
- June 8, 2024
- HAGOR
Table of Contents
3236 CPS-Fixed Arms VESA 200
Instruction Manual
CPS-Fixed Arms VESA 200 | Art.-Nr.: 3236
CPS-Fixed Arms VESA 400 | Art.-Nr.: 3237
CPS-Fixed Arms VESA 600 | Art.-Nr.: 3238
3236 CPS-Fixed Arms VESA 200
Caut i on!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can
cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the
special conditions at the installation site. Please check this in advance and
replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
Scope of delivery
1a. Installation of the VESA mount (flat back)
1b. Installation of the VESA mount (irregular back)
- Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
- Center the adapter brackets on the back of the display as shown, and screw the brackets onto the display, being sure to not over-tighten.
Hang out protection and height adjustment
Height adjustment: 10 mm
Dimensions
HAGOR Products GmbH
Oberbecksener Straße 97
D-32547 Bad Oeynhausen
Telefon: +49(0)57 31-7 55 07-0
Mail: [email protected]