Cubo Ai Plus Smart Baby Monitor User Guide

June 8, 2024
Cubo Ai

Cubo Ai Plus Smart Baby Monitor

  • Cubo Ai Plus Smart Baby Monitor

Cubo Ai Plus at a Glance

Cubo-Ai-Plus-Smart-Baby-Monitor-fig-2

Cubo Ai Plus Smart Baby Monitor

Cubo-Ai-Plus-Smart-Baby-Monitor-fig-3

  • Sleep Mode
    To enter sleep mode, hold button for 3 seconds until you hear the sleep mode sound. Press the button once to resume activity.

  • Night Light :
    Press the button once to turn on and off the night light.Cubo-Ai-Plus-Smart-
Baby-Monitor-fig-4

In the box

Cubo-Ai-Plus-Smart-Baby-Monitor-fig-5

Choose your Set-up

Please follow the instructions according to your desired stand type

Floor Stand

  1. Cubo Ai Plus Baby Monitor
  2. Floor Base
  3. Water Bag
  4. T&H Dongle
  5. Wall Plug
  6. U-Shaped Element
  7. L-Shaped Element
  8. L-Hook
  9. Stand Element x 3
  10. Stand Connector x 2
  11. 3 M Cable
  12. Crib Stabilizer

Crib Attachment

  1. Cubo Ai Plus Baby Monitor
  2. Crib Attachment
  3. T&H Dongle
  4. Wall Plug
  5. U-Shaped Element
  6. L-Shaped Element
  7. L-Hook
  8. Stand Element x 3
  9. Stand Connector x 2 13 3 M Cable
  10. Crib Stabilizer
  11. Crib Stand Safety Cap

Mobile Stand

  1. Cubo Ai Plus Baby Monitor
  2. Mobile Stand
  3. T&H Dongle
  4. Wall Plug
  5. 2 M Cable

Floor Stand

ATTENTION! PLEASE USE THE 3M CABLE

  • Scan to watch Video TutorialCubo-Ai-Plus-Smart-Baby-Monitor-fig-11Cubo-Ai-Plus-Smart-Baby-Monitor-fig-12

Crib Attachment

ATTENTION! PLEASE USE THE 3M CABLE

MOUNT ON THE CRIB

Cubo-Ai-Plus-Smart-Baby-Monitor-fig-14Cubo-Ai-
Plus-Smart-Baby-Monitor-fig-15Cubo-Ai-
Plus-Smart-Baby-Monitor-fig-16Cubo-Ai-
Plus-Smart-Baby-Monitor-fig-17

Mobile Stand

Cubo-Ai-Plus-Smart-Baby-Monitor-fig-19

Removing Cubo from the Camera Holder

  1. Release the Safety Lock.
  2. Lift Cubo Ai upward from the Camera Holder.

Removing the Stand from the Floor Base

  1. Open the round Floor Base.
  2. Press button to release, pull the Stand Element upward.

Wi-Fi Connectivity

Make sure both your download/upload speed is at least 5 Mbps

  • Test your connection speed by standing next to your Cubo Ai and head to https://fast.com/ while connected to your Wi-Fi
  • If your Wi-Fi speed is less than 5 Mbps you may need to contact your Internet provider to improve your Internet connectivity

Arrange a safe crib environment

Clear the crib!

  • Don’t add bumper pads to the bed rail, sleep in the same room as the baby, but not in the same bed.
  • Avoid using pillows, toys, and blankets, wear a onesie to reduce the chance of accidental face coverage.
  • The mattress should be hard enough so that baby’s face won’t sink in.

Sleeping on the back is safest!
Tummy sleeping could lead to indirect suffocation and cause hazards such as reduction in blood oxygen, increase in body temperature, and impact the autonomic nervous system.

Compliance and Precautions

  1. Cubo Ai Smart Baby Monitor is not a medical device and should not be used as a SIDS (Sudden Infant Death Syndrome) prevention tool. Cubo Ai Smart Baby Monitor is designed to help caregivers monitor their baby. Caregivers must check their baby’s condition regularly. For premature or potentially ill infants, this product should be used under the direction of a doctor or a medical professional. For more details, please refer to the product website or the terms of use and privacy policy on the App.
  2. Please install Cubo Ai according to the instructions in the instruction manual. If the Cubo AI Smart Baby Monitor and bracket are installed properly, it may prevent unnecessary accidents. Please follow the instructions in the manual.

Product name: Cubo Ai Smart Baby Monitor; Model: Angel Input 100-240V, Output: 5V2A, 2.4/5GHz Wi-Fi, 2.4GHz Bluetooth Low Energy Yun Yun AI Baby Camera Co., Ltd. 19F.-4, No. 2, Ln. 150, Sec. 5, Xinyi Rd., Xinyi Dist., Taipei City 110, Taiwan Yun Yun US Corporation 1108 S Baldwin Ave #107, Arcadia, CA 91007
Product liability insurance: This product has been insured by product liability insurance for $1,000,000 USD.

FCC

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement

  1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
  2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Hereby, Yun yun AI Baby camera Co., Ltd. declares that the radio equipment type Cubo AI Baby Monitor is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulations 2017 SI 2017/1206. The full text of the EU declaration of conformity is available at the following internet address Yun Yun AI Baby Camera Co., Ltd. 19F.-4, No.2, Ln. 150, Sec. 5, Xinyi Dist., Taipei City 110, Taiwan Yun Yun US Corporation 1108 S Baldwin Ave #107, Arcadia, CA 9100 The frequency and maximum transmitted power in EU are listed as belows,

  • 2412 – 2472 MHz: 19.93 dBM
  • 5150 – 5250 MHz: 21.57 dBM
  • 5250 – 5350 MHz: 19.68 dBM
  • 5500 – 5700 MHz: 19.69 dBM

WLAN 5GHz: Operations in the 5.15-5.35GHz band are restricted to indoor usage only.

Need help?

Cubo-Ai-Plus-Smart-Baby-Monitor-fig-25

Share Cubo Ai with even more parents!Cubo-Ai-Plus-Smart-Baby-Monitor-
fig-26

  • Recommend to Friends Earn rewards for each successful referral!
  • Join the Cubo Ai Community Search for us on Instagram @cubobabymonitor
  • Love your Cubo Ai? Share your story! Email us your photos for the chance to win a small gift parents@getcubo.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals