OLIGHT ZX Pro Front Bicycle Lamp User Manual
- June 8, 2024
- OLIGHT
Table of Contents
OLIGHT ZX Pro Front Bicycle Lamp
USER MANUAL
Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!
IN THE BOX
SPECIFICATIONS
- All performance measurements in accordance with ANSI/NEMA FL1-2009 Standard
HOW TO RECHARGE
- Before first use, please charge it fully before you turn it on.
- Charge directly via the USB-C charging cable.
- Standard Charging Time: Approx.2.5hrs (5V 1A)
BATTERY INDICATOR
- When the device is powered-on, the indicator on the power button will indicate the battery level.
- When the device is powered-off, short press the power button to activate the indicator light (light will shut down automatically after 3 seconds).
HOW TO INSTALL
HANDLEBAR MOUNT INSTRUCTIONS
- The handlebar mount comes with 4 straps in different lengths, including No.2, No.3, No.5 and No.6 straps, to suit different handlebars.
- Strap No.2 is suitable for handlebars with a diameter of 1 inch/25.4mm.
- Strap No.3 is suitable for handlebars with a diameter of 1.10 inches/28mm.
- Strap No. 5 is suitable for handlebars with a non-circular cross section.
- Strap No.6 is suitable for handlebars with a diameter of 1.25 inches/31.8mm.
- The maximum torque applied to the tightening screw in the handlebar mount cannot exceed 0.5N.m.
DANGER
- DO NOT shine the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
- DO NOT cover the light head when the bicycle light is on, or place the bicycle light head on the ground. The radiation energy of the bicycle light may cause damage to the bicycle light itself, or even result in burning to flammable objects.
WARNING
- Keep out of reach of children.
- The light contains a lithium-ion battery. Certain restrictions may apply to this product when traveling, especially when traveling by air. Always check with your carrier for specific restrictions prior to traveling with this product.
- DO NOT clean the lens with alcohol or any other chemicals.
NOTICE
- Store the light at room temperature in a dry place. Avoid moisture, or extreme hot or cold.
- Store the light in the charged condition. Avoid “deep discharge”. Battery life will decrease if the light is stored in a fully discharged condition.
- Over time, the run time of the battery will diminish. Expect about 500 full charges, depending on care. After a full life, the battery will continue to charge but with a lower run time.
- When the run time is unsatisfactory, please DO NOT open the case of the light or incinerate.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.
HOW TO OPERATE
- ON/OFF: Long press the power button to turn the light on or off.
- When the light is turned on, it will return to the mode used previously.
CHANGE BRIGHTNESS LEVEL
- While the light is already on, single click the power button to change brightness levels. Starting from the present brightness level, it will cycle through low, medium, and high mode with each single click.
WARRANTY
Within 30 days of purchase: Return to the original seller for repair or replacement.
Within 2 years of purchase: Return to Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.
USA Customer Support cs@olightstore.com Global Customer Support customer-service@olightworld.com Visit www.olightworld.com to see our complete product line of portable illumination tools.Dongguan Olight E-Commerce Technology Co., Ltd 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>