OLIGHT Baton 3 Orange Limited Edition Flashlight User Manual

OLIGHT Baton 3 Orange Limited Edition Flashlight

WARNING

• Don’t use damaged, deformed battery, or with broke sleeve.
• Do not short the charging port with metallic object intentionally.
• Keep the light locked out when carrying or transporting to prevent burning accidents caused by abnormal startup.

CAUTION

• Do not look directly at the light source or shine to eyes, may cause temporary blindness or permanent damage to the eyes.
• Do not block the light outlet at close range, the energy emitted from the light may cause the object to burn.
• Do not charge the light with any other non-specified chargers.
• CAUTIONHOT: Do not touch the hot surface place, it may cause skin burns.
• Dedicated battery, do not take it out for charging.

NOTICE

• Do not put a hot light into any type of fabric bag or fusible plastic container.
• Do not activate the maximum brightness mode multiple times continuously to prevent the high temperature on the surface.
• When the light gets hot, please switch it to low brightness mode, or shut off the flashlight temporarily.
• Active thermal management: The built-in thermistor monitors the temperature of the light in real time and suppresses overheating by reducing the output.
• Don’t leave the light in a car where inside of temperature may be over 60℃, or similar places.
• Do not put it in the mouth or lick it, leakage of the charging port can cause discomfort.
• Non pet toys.
• Do not disassemble the product.
• Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.
• For long-term storage, please remove the battery.
• If the product is left unused for a long period of time, or carried and transported, please loosen the flashlight body a half turn to disconnect the power supply.

REMARK

• A USB adapter with 10W(5v2A) or above is recommended. Otherwise, the charging time will be longer.
• Keep the charging port clean and dry.
• Please keep the lens clean. The dirt or water fog in front of the lens will interfere the proximity sensor, and cause the light can not output high brightness level.
• Please protect the lens and prevent scratching, the scratches may interfere the proximity sensor, and cause the light can not output high brightness level.
• It is normal that the light flickers when the battery is close to running out.
• Operating time in Turbo or high mode varies with ambient temperature and heat dissipation conditions, better heat dissipation longer runtime.
• The light will memorize current mode when it is powered off, including below modes: moonlight, low, medium, and high mode (after the light is turned off, high mode will be memorized for 1 minute before reverting to medium mode. If the light is turned off on turbo mode, the high mode will be memorized instead and will also revert to medium mode after 1 minute, turbo mode can not be memorized ).

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6
Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>