vtech RM7868HD 7 Inch Touch Screen WiFi 1080p Pan and Tilt Monitor User Guide

: June 8, 2024
: vtech

Table of Contents

RM7868HD 7 Inch Touch Screen WiFi 1080p Pan and Tilt Monitor
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RM7868HD 7 Inch Touch Screen WiFi 1080p Pan and Tilt Monitor

Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.

RM7868HD RM7868-2HD
7″ Touch Screen Wi-Fi 1080p Pan & Tilt Monitor

Quick start guide

For more support information
S m
RM7868HD RM7868-2HD

Congratulations
on purchasing your new VTech product. Before using this baby monitor, please read the Important safety instructions.
For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. In Canada, visit www.vtechcanada.com.
What does HD Video Monitor do?
VTech 7″ Touch Screen Wi-Fi 1080p Pan & Tilt Monitor allows you to stay close to your baby when you are on the move or away. This monitor is Wi-Fi enabled, using your home wireless network to stream live video and audio through the 1080p baby unit and 7-inch color screen parent unit. It allows you to maintain a constant connection to your baby.
You can also monitor from your smartphone and mobile tablet. VTech 7″ Touch Screen Wi-Fi 1080p Pan & Tilt Monitor uses MyVTech Baby Pro app to let you instantly see and hear what’s happening with your baby from anywhere in the world. The app can be downloaded from the App Store or the Google PlayTM Store.

Important safety instructions

The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above 6.5 feet (2 meters).
4. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.
5. This product is not intended for use as a medical monitor.
6. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.
7. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC seal.
8. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product.
Power adapters information: Baby Unit Output: 5V DC 1000mA VTech Telecommunications Ltd. Model: VT05EUS05100 Parent Unit Output: 5V DC 2A VTech Telecommunications Ltd. Model: VT07EUS05200
Rechargeable battery information: 3.7V 5000mAh, 18.5Wh Lithium-ion battery Zhuhai Great Power Energy Co., Ltd. Model: GSP806090-5Ah-3.7V-1S1P
9. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, underthe-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet (power adapter) shall be installed near the equipment and shall be easily accessible.
11. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
12. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.
14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company.
15. The equipment is to be supplied from an identified USB port complying with the requirements of Limited Power Source.
16. Do not overload wall outlets or use an extension cord.
17. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
18. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register.

19. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.
20. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
21. You should test the sound reception every time you turn on the units or move one of the components.
22. Periodically examine all components for damage.
23. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time.
24. Children should be supervised to ensure that they do not play with the product.
25. The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach of children.
26. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions · Use and store the product at a temperature between 32oF and
104oF.
· Burn hazard, fire hazard, explosion hazard associated with mishandling of the battery.
· Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.

·

Warning–Strangulation Hazard–Children

have STRANGLED in cords. Keep this cord out of

the reach of children (more than 3 ft (0.9m) away).

Do not remove this tag.

· Never place the camera unit(s) inside the baby’s crib or

playpen. Never cover the camera unit(s) or parent unit with

anything such as a towel or a blanket.

· Other electronic products may cause interference with your

camera unit. Try installing your camera unit as far away from

these electronic devices as possible: wireless routers, radios,

cellular telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless

telephones.

Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients
· Should keep wireless devices at least six inches from the pacemaker.
· Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.

Electromagnetic fields (EMF)
This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available today.

What’s in the box
Your baby monitor package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Quick start guide

x 2

1 set for RM7868HD 2 sets for RM7868-2HD

Requirements

For mobile access: MyVTech Baby Pro mobile app Network Wi-Fi router
Internet connection

Wi-Fi 2.4GHz 802.11 b/g/n
1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per baby unit

Download app for mobile access

1 Download the free MyVTech Baby Pro mobile app and install it to a
mobile device, then use your mobile device and the mobile app to monitor your areas remotely.
1. Press MENU when the parent unit is idle.

2. Go to

Connect Mobile Phone.

3. Scan the QR code in the parent unit to download the app into your mobile device.
4. Follow the instructions in the mobile app to set up and pair your baby unit to the mobile app.

Alternatively, you can download the mobile app from the App Store or Google Play store.

Install MyVTech Baby Pro mobile app
1. Browse the App Store or the Google Play store . 2. Search for the mobile app with the keyword “myvtech baby pro”. 3. Download and install the MyVTech Baby Pro mobile app to your mobile device. OR Scan the QR codes on the right to get the app.

· Make sure your mobile device meets the minimum requirement for the mobile app.
Minimum requirement The mobile app is compatible with: · AndroidTM 6.0 or later; and · iOS 12 or later.
2 After installing the mobile app, follow the instructions in the mobile app and parent
unit to set up and pair your baby unit.
In your mobile device:
1. Tap to run the mobile app in your mobile device, and then create a user account. 2. We recommend that you use common webmail services, such as Google Gmail for
registration of your user account. Check your email (and Spam folder), and activate your new camera account via the email link, then sign in to your account. 3. Follow the instructions in the mobile app to pair the camera. Tap , then Add Camera in the mobile app to get started.

Overview
Baby unit overview
1 2 3 4 5
9
10 11

Parent unit overview

1 Light sensor

6

2 Camera lens

1

3 Infrared LEDs · Allow you to see clearly in a dark environment.

4 Microphone

5 Night Light

6

Night Light Control Key

12 2

3

4 13
5

6

7 14

16

· Go to Night Light section to learn more. 7

7 LED indicator

8

· Red is steadily on when the baby unit is

connecting to the parent unit in direct mode.

8 15
9 10
11

· Green is steadily on when the baby unit is connected in Wi-Fi router mode.
· Red flashing slowly during video streaming in direct mode.

1 3- level sound indicator light
· Green: low sound level is detected by the baby unit.
· Green and amber: moderate sound

6

| | | Arrow keys

· Press to navigate leftward, upward, rightward or downward, within the main menu and sub-menus.

· Green flashes slowly during video streaming in Wi-Fi router mode.

level is detected by the baby unit.
· Green, amber and red: high sound level is detected by the baby unit.

· While viewing a zoomed image, press to move the image leftward, upward, rightward or downward.

8 ON/OFF switch · Power it on or off.
9 Speaker

2 LINK LED light
· On when the parent unit is linked to the baby unit.

7

|

· Increase or decrease parent unit volume.

10 Temperature sensor

· Flashes when the link to the baby unit is lost.

8

Zoom

11 Power jack

3

LED light

· Press to zoom in/out. · While in a sub-menu, press to view the

12 Wall mount slots

· On when the parent unit is connected to

help menu.

13 PAIR · Press and hold for three seconds to enter pairing mode.

AC power, and the battery is charging.
· Flashes when the parent unit battery is low and needs to be charged.

9

Power | LCD ON/OFF

10 Microphone

12

· Reset the baby unit to factory default.

4 TALK /

11 Touch screen

1. Press and hold PAIR key until you hear a beep sound.

· Press and hold to talk to the baby unit. · While in a sub-menu, press to exit.

12 Antenna

2. Release the PAIR key, and then press the

13

PAIR key again five times until you hear

5 MENU | SELECT

13 Speaker

another beep sound. 3. The baby unit will sound another beep

· Press to enter the main menu. · While in a menu, press to choose an

14 Power jack

when the reset completes. Then, the baby unit will reboot.

item, or save a setting.

15 RESET · Force reboot the parent unit.

16 Stand

CONFORMS TO UL STD. 62368-1 CERTIFIED TO CSA STD. C22.2 NO.62368-1
Android TM and Google Play TM are trademarks of Google Inc.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

How the system works
Direct mode The parent unit and the baby unit of your video monitor connect to each others in Direct mode by default, which allows you to stream live video right out of the box. Direct mode connection lets you stream live video from parent unit only.

Local access

· You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to improve the signal strength.

Wi-Fi Router mode

To stream live video with better connection, you can also set up your monitor in Router mode connection.

Router mode uses your home Wi-Fi network to connect the video monitor. It supports streaming live video through the parent unit and MyVTech Baby Pro app.

Mobile access

Download and install the MyVTech Baby

Pro mobile app to stream remotely. With

the mobile app, your Wi-Fi router (not

included) serves as a communicating channel between your baby unit and mobile device, allowing you to monitor

Connecting Wi-Fi to enhance local access

and control your baby unit wherever you

are. For details, see Download app for mobile access section in this quick start guide.

Auto mode
With Auto mode connection, the parent unit will automatically select the most reliable connection mode (Direct or Wi-Fi) when connecting to the baby unit(s). Mobile app access will not be interrupted in Auto mode.

· When both parent unit and app are viewing the camera simultaneously, the video quality will be optimised to deliver the best possible viewing result.

CABLE MANAGEMENT

1

2

3

Protect your privacy and online security
VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-recommended best practices to help keep your wireless connection private and your devices protected when online. We recommend you carefully review and consider complying with the following tips.
Ensure your wireless connection is secure. · Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-PSK with AES”
setting in your router’s wireless security menu. Change default settings. · Change your wireless router’s default wireless network name (SSID) to something unique. · Change default passwords to unique, strong passwords. A strong password:
– Is at least 10 characters long. – Is complex. – Does not contain dictionary words or personal information. – Contains a mix of uppercase letters, lowercase letters, special characters and numbers. Keep your devices up to date. · Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates. · If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router. · UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network.
For more information on wireless connections and protecting your data, please review the following resources from industry experts: 1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips
www.fcc.gov/consumers/guides/how-protect-yourself-online. 2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet
www.us-cert.gov/ncas/tips/ST15-003. 3. Federal Trade Commission: Using IP Cameras Safely
https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely. 4. Wi-Fi Alliance: Discover Wi-Fi Security
http://www.wi-fi.org/discover-wi-fi/security.

Connect, charge and power on the baby monitor

Connect the baby monitor
· The rechargeable battery in the parent unit is built-in. · Use only the power adapters supplied with this product. · Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets. · Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not
designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets. · Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

Charge the parent unit battery before use The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, keep the parent unit connected to AC power.
· Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the parent unit battery is fully charged, the battery icon becomes solid .
· The standby time varies depending on your actual use.
After the parent unit is fully charged, press Power until the welcoming screen appears.

Slide the switch to ON to power on your baby unit.
· When powering up, the baby unit’s status LED turns on. It will turn off after a while and keeps off.
· The status LED is set to off by default.

WARM

NOTE: Camera lens and surface may get warm during normal operation.

Press and hold

The battery icon indicates the battery status (see the following table).

Battery indicators

Battery status

Action

The screen displays

and

.

The battery has very little Charge without charge and may be used interruption (about 30

The LED light flashes.

for only a short time. minutes).

The battery icon becomes solid

.

The battery is fully charged.

To keep the battery charged, connect it to AC power when not in use.

Raise the parent unit antenna for better reception

Parent unit icons

Main Menu

Options

Monitoring mode (* For RM7868-2HD only)

· View baby units in Single mode. · View baby units in Patrol mode. · View baby units in Split screen.
Night light
· Turn on or turn off night light. · Select a night light color. · Adjust night light brightness. · Set a night light timer.
Melodies and soothing sounds
· Select play all melodies, or play one of the five melodies and five soothing sounds.
· You can also set the timer to stop playing after 15, 30 or 60 minutes, or playing non-stop.
· Adjust baby unit speaker volume.
General settings
· Wi-Fi settings · Configure Wi-Fi · Connect to mobile phone · Selection Connection Mode · Connection Status
· Turn on/off parking mode · Adjust parent unit screen
brightness · Set screen lock timer · Set screen off timer · Temperature display format · Languages, reset settings,
software update.
Alerts Settings
· Adjust alerts volume · Turn on/off temperature alert · Select maximum and minimum
temperature for alert range. · Turn on/off low battery alert tone · Turn on/off motion detection
alert tone

Main Menu

Options

· Select motion sensitivity level. · Turn on/off no link alert

Help and info

· Support information · System information · Privacy information

Status icons Direct mode Parent unit, baby unit 1 and baby unit 2 (For RM7868-2HD only) are connected to each others directly.
Wi-Fi Router mode Parent unit, baby unit 1 and baby unit 2 (For RM7868-2HD only) are connected to home Wi-Fi network.
Baby unit 1 and 2 are being viewed in Patrol mode (For RM7868-2HD only).
Baby unit 1 and 2 are being viewed in Split mode (For RM7868-2HD only).
Touch screen is locked.
Night vision is turned on.
Motion detection alert is turned on. Melodies and soothing sounds are playing.
Night light is turned on.
Auto night light brightness is activated.
Temperature alert is turned on.
Parent unit is muted.
Temperature is lower than 68°F. Temperature is within 68°F and 75°F. Temperature is higher than 75°F. Battery indicator.

Disclaimer and Limitation of Liability
VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road – Ste 555 Tigard, OR 97223, United States Phone: 1 800-595-9511 in the U.S. or 1 800-267-7377 in Canada

Frequency Channels LCD
Nominal effective range Power requirement

Baby unit: 2412 – 2462 MHz 11 7” Color LCD (IPS 1280×800 pixels) Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Baby unit power adapter: Output: 5V DC, 1000mA. Parent unit power adapter: Output: 5V DC, 2A. Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery

7HFKQLFDOVSHFLFDWLRQV

Basic operation
After powering up your video monitor, the parent unit streams live video in direct mode. We recommend you follow the instructions on screen to set up home Wi-Fi network with your monitor for functionality enhancements and mobile access. See Auto software and firmware update and Download app for mobile access in this quick start guide.
Use the Control Panel Tap the screen to open and use the Control Panel.
Tap to lock the panel, and tap to unlock it.

Use the Main Menu Press MENU on the parent unit to enter the main menu, choose a menu item, or save a setting. You can use the parent unit menu for advanced settings or operations, such as to play or stop the baby unit lullaby, or adjust the baby unit sound sensitivity.
While in the menu:
· Press | | | to scroll among the menu options.
· Press SELECT to select an item. · Press TALK to return to the live video.
· Press to go to the Help & info page.

Adjust speaker volume

Press

|

to adjust the parent unit

speaker volume level received from the

baby unit.

Muted

Zoom
Press to zoom in or out in a fixed zoom sequence. indicates that the image is magnified 3 times.

Talk to your baby via the baby unit

1. Press and hold the TALK key.

2. When the

icon displays on

screen, speak to your parent unit.

Your voice is transmitted to the

baby unit.

3. When finished talking, release the TALK key to hear your baby again.

Turn on/off the parent unit screen
You can turn on or turn off the parent unit screen without powering off the unit. You will still hear sounds from the baby unit.
· Press | LCD ON/OFF on the parent unit to turn off the screen.
· Press any key on the parent unit to turn the screen on again.

You can reset the parent unit by pressing the RESET key at the back of the unit.
Insert a pin into the RESET hole on the back of the parent unit, and then press the key inside.

Press and hold Press and hold

Night Light

You can control the night light remotely on the parent unit or directly on the baby unit.

On the parent unit:

On the baby unit:

1. Press MENU.

2. Press or to scroll to

Night Light

menu, then press MENU or to enter.

3. Press or to choose below options:

Turn on/off night light Change night light color Adjust night light brightness Set night light timer

Night Light Control Key Single Tap: Turn on/off Tap and hold: Adjust night light brightness

For RM7868-2HD only

Monitoring Modes
When more than one baby unit is paired to the parent unit, you can choose to view different baby units in three monitoring modes. Learn more about each below:

Single Mode Split Mode Patrol Mode

The screen displays images only from the selected baby unit in full screen.
The screen displays images from all paired baby units at the same time in split view.
The screen displays a single cam view that transitions to a different baby unit every 10 seconds.

Change the monitoring mode: 1. Press MENU when the parent unit is idle.

2. Press MENU or to enter

Monitoring Mode menu.

3. Press or to choose between Single mode options. Press SELECT to confirm.

, Split , and Patrol

monitoring

Test the sound level and position the baby monitor

Testing the sound level of the baby monitor
· This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such.

· For hearing protection, make sure the parent unit is more than 3 feet away from the baby

unit. If you hear any high-pitched noise from the parent unit, move the parent unit further

until the noise stops. You can also press

on the parent unit to lower or mute the noise.

· Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit.

3. To avoid causing high-pitched screeching noise from your baby monitor: · Make sure your baby unit and parent unit are more than 3 feet apart; OR · Turn down the volume of your parent unit.

3ft (1m)

3ft

Positioning the baby monitor

· Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s crib or playpen.

1. Place the baby unit more than 3 feet away from your baby.

2. Adjust the angle of the baby unit to aim at your baby.

< 3ft (1m)
test the location for the baby unit
If you plan to install your baby unit in a designated location, and use your home Wi-Fi network to connect your video monitor, you need to test which of your selected monitoring areas within the house have good Wi-Fi signal strength. After you have powered on your parent unit, you can use your parent unit’s Wi-Fi signal strength indicator to assist in checking. Once you have identified the suitable location, you can install your baby unit. Adjust the distance between your baby unit and the Wi-Fi router if needed.
· Depending on surroundings and obstructing factors, such as the effect distance and internal walls have on signal strength, you may experience reduced Wi-Fi signal. To improve the Wi-Fi signal strength, adjust the distance or direction of your parent unit. Check with your parent unit again.

$XWRVRIWZDUHDQGUPZDUHXSGDWH

To ensure that your baby monitor is always at its best performance, the parent unit will prompt you to update its software and the baby unit firmware when there are new versions available.
· Follow the instructions on the parent unit screen to update your baby monitor. If you skip the updates, the parent unit and baby unit will be updated automatically when the parent unit is powered off, and then powered on again.
· To check if your device is running on the latest software or to update your device software, go to:

Connect Mobile Phone

Connect your baby monitor to Wi-Fi
· You must connect your video monitor to your secured home Wi-Fi network in order to receive the latest software and firmware updates. To set it up, go to:

Need help?

For instructions and guides to make the best use of your baby monitor,

S

and for the latest information and support, check out our online

m

help topics and FAQs. The online help page will also be updated

periodically to reflect product system updates.

Use your smartphone or mobile device to access our online help.
· Go to https://help.vtechphones.com/RM7868HD or https://help.vtechphones.com/RM7868-2HD; OR

· Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the device’s camera up to the QR code and frame it. Tap the notification to be redirected to the online help page.
– If the QR code is not clearly displayed, adjust your camera’s focus by moving your device closer or further away until the image is clear.

RM7868HD online help

If you would like to contact us, visit
https://help.vtechphones.com/cs.
You can also call our Customer Support at 1-844-848-8324 (1-844-84-VTECH) [in US] or 1-888-211-2005 [in Canada] for help.

RM7868-2HD online help

mount the baby unit (optional)

Notes
· Check for reception strength and camera angle of the baby unit before drilling the holes.
· The types of screws and plugs you need depend on the composition of the wall. You may need to purchase the screws and plugs separately to mount your baby units.

1. Place the wall mount bracket on a wall and then use a pencil to mark two holes in parallel. Remove the wall mount bracket and drill two holes in the wall (7/32 inch drill bit).

2. If you drill the holes into a stud, go to step 3.
· If you drill the holes into an object other than a stud, insert the wall plugs into the holes. Tap gently on the ends with a hammer until the wall plugs are flush with the wall.

3. Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole first, so that the wall mount bracket position is fixed. You can tighten the other screw in the top hole.
4. Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Connect the power adapter to the baby unit and a power supply not controlled by a wall switch.

3. Insert the screws into the holes and tighten the screws until only 1/4 inch of the screws are exposed.

OR

4. Place the baby unit on the wall

1

2

mount bracket, and then slide it

forward until it locks into place. Align

the holes on the wall mount bracket

with the screws on the wall, and slide

the wall mount bracket down until it

locks into place.

5. You can maximize your baby unit’s viewing angles by tilting the wall mount bracket. Hold the baby unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket. Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and secure the angle.

General product care
To keep this product working well and looking good, follow these guidelines: · Avoid placing it near heating appliances and devices that generate electrical noise (for example,
motors or fluorescent lamps). · DO NOT expose it to direct sunlight or moisture. · Avoid dropping the product or treating it roughly. · Clean with a soft damp cloth. · DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap. · DO NOT use cleaning spray or liquid cleaners. · Make sure the parent unit and the baby unit are dry before you connect them to the mains again. · Clean the USB charging port of dust, dirt, and lint regularly.
Storage
When you are not going to use the video monitor for some time, store the parent unit, the baby unit and the adapters in a cool and dry place.

Frequently asked questions

Below are the questions most frequently asked about the video monitor.

Can I turn the parent unit display screen off but keep hearing sounds from the baby unit?

Yes, press | LCD ON/OFF on the parent unit to turn off the screen. The parent unit display will also dim automatically after being inactive for some time. In both instances, you will still be able to hear all sounds from the baby unit. Press any key to turn the screen back on.

Why is the baby unit not responding normally?

Try the following (in the order listed) for a common cure: 1. Disconnect the power to the baby unit. 2. Wait a few minutes before connecting power back to the baby unit. 3. Reboot the parent unit.

Why is my screen in black and white?

The baby unit has a light sensor that measures ambient light. When the ambient light is dim, such as during night time or in a dark room, the baby unit activates its infrared LEDs, and displays the camera images in black and white night vision.

Why does my baby unit The baby unit may have lost connection to the Wi-Fi router. Check your

show offline? Why is the network and router settings.

connection lost every now and then?

Other electronic products may cause interference with your baby unit. Try installing your baby unit as far away from these electronic devices as possible.

Why can’t I hear a sound/Why can’t I hear my baby crying?

The parent unit speaker volume may be too low. Press to increase the volume.

on the parent unit

You may have set a low sound sensitivity level. Set the sound sensitivity to a higher level. For details, go to www.vtechphones.com for online help topics.

The RBRC seal
The RBRC seal on the lithium-ion battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The program provides a convenient alternative to placing used lithium-ion batteries into the trash or municipal waste, which may be illegal in your area. VTech’s participation makes it easy for you to drop off the spent product at local retailers participating in the program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY® for information on Li-ion battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources. The RBRC Seal and 1 (800) 8 BATTERY® are registered trademarks of Call2recycle, Inc.
FCC and IC regulations
FCC Part 15 NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of all persons’ body are maintained at a distance of approximately 8 in (20 cm) or more. The transmitter and antenna of the parent unit shall be held at least 1 in (2.5 cm) from your face. This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B) Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term ’IC:’ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. RF radiation exposure statement The product complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with a minimum distance of 8 in (20 cm) between the baby unit and all persons’ body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This equipment complies also with Industry Canada RSS-102 with respect to Canada’s Health Code 6 for Exposure of Humans to RF Fields.
California Energy Commission battery charging testing mode
This video monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your video monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the parent unit is paired to camera units, the CEC battery charging testing mode is activated while it is powered off and charging.

For cETL compliance only

La plaque signalétique appliquée est située au bas du socle de l’unité du bébé. Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de précaution de base afin de réduire les risques d’incendie, d’électrocution et de blessures corporelles, dont ceux qui suivent: 1. Observez toutes les instructions et mises en garde inscrites sur
l’appareil. 2. L’installation par un adulte est requise. 3. MISE EN GARDE: N’installez pas l’unité du bébé à une hauteur
supérieure à 2 mètres. 4. Ce produit a été conçu pour être un dispositif d’appoint
seulement. Il n’est pas le remplacement d’une supervision responsable et adéquate par un adulte et ne devrait pas être utilisé comme telle. 5. Ce produit n’est pas conçu pour être utilisé en tant que moniteur médical. 6. N’utilisez pas cet appareil près de l’eau ni de toute autre source d’humidité, par exemple, près d’une baignoire, cuve à lessive, évier de cuisine, dans un sous-sol humide ni près d’une piscine, dans un soussol humide ou une douche. 7. rMisIqSuEeENd’GexApRloDsEio: nUtpiloisuerzruaintisquurevemneirnstiluanpmileafuovuarinsitey.pUende pile est utilisé pour l’unité du parent. La pile ne peut pas être soumise à des températures extrêmes élevées ou basses et à une faible pression d’air à haute altitude pendant l’utilisation, l’entreposage ou le transport. L’élimination de la pile dans le feu ou dans un four chaud, ou l’écrasement ou le découpage mécanique de la pile peuvent entraîner une explosion. Laisser la pile dans un environnement à température extrêmement élevée peut entraîner une explosion ou la fuite d’un liquide ou d’un gaz inflammable. Une pile soumise à une pression d’air extrêmement basse peut provoquer une explosion ou une fuite de liquide ou de gaz inflammable. Éliminer la pile usagée conformément aux informations du Sceau RBRC. 8. N’utilisez que les adaptateurs inclus avec ce produit. L’utilisation d’un adaptateur dont la polarité ou la tension serait inadéquate risque d’endommager sérieusement le produit et mettre votre sécurité en péril.
Informations sur les adaptateurs électriques : Sortie : 5 V CC 1000mA. VTech Telecommunications Ltd. Modèle : VT05EUS05100 Sortie : 5 V CC 2A. VTech Telecommunications Ltd. Modèle : VT07EUS05200
Informations sur les piles rechargeables : 3.7V 5000mAh, 18.5Wh Lithium-ion batterie Zhuhai Great Power Energy Co., Ltd. Modèle : GSP806090-5Ah-3.7V-1S1P 9. Lorsqu’ils sont branchés dans une prise de courant, les adaptateurs secteur ont été conçus pour être orientés correctement, soit à la verticale ou au plancher. Les broches n’ont pas été conçues pour supporter le poids du bloc d’alimentation et le maintenir en place si celuici est branché dans une prise au plafond, sous une table ou dans un meuble. 10. Pour les appareils raccordés, la prise de courant (de l’adaptateur secteur) doit être installée près de l’équipement et doit être facilement accessible. 11. Débranchez ce produit de la prise de courant avant de procéder au nettoyage. N’utilisez pas de nettoyants en aérosols. Utilisez un chiffon humide pour le nettoyer. 12. Ne coupez pas les cordons d’alimentation pour remplacer les fiches, car ceci peut présenter un danger potentiel. 13. Ne laissez aucun objet reposer ni appuyer sur le cordon d’alimentation. N’installez pas cet appareil dans un endroit où l’on risque d’écraser le cordon d’alimentation ou de le piétiner. 14. Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur l’étiquette. Si vous ne connaissez pas le type d’alimentation que vous possédez à votre domicile, consultez votre marchand ou votre compagnie locale d’électricité. 15. L’équipement doit être fourni à partir d’un acquiescement gauche identifié d’USB aux conditions de la source d’énergie limitée. 16. Ne surchargez pas les prises de courant murales ni les rallonges électriques. 17. Ne placez pas cet appareil sur un chariot, meuble, trépied, support de montage ni table chancelants. 18. Les trous et ouvertures du boîtier, situés à l’arrière de l’appareil ou sous celui-ci, servent à aérer l’appareil. Pour l’empêcher de surchauffer, ne bloquez sous aucun prétexte ces ouvertures et n’empêchez pas l’aération adéquate de l’appareil en le plaçant sur un lit, divan, tapis ou toute autre surface similaire. De même, ne le positionnez pas à proximité ni au-dessus d’une source de chaleur ou d’un calorifère. De plus, ne placez pas l’appareil dans

un endroit avant de vous assurer qu’il y ait une bonne circulation d’air. 19. N’enfoncez jamais d’objets à travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-circuits qui peuvent dégénérer en incendies ou en risques d’électrocution. Ne renversez jamais de liquide dans ce produit. 20. Afin de réduire les risques d’électrocution, ne démontez pas cet appareil, mais apportez-le dans un centre de service autorisé. L’ouverture du boîtier ou le retrait de toutes pièces que contient cet appareil, à l’exception de l’accès autorisé à certaines portes ou ouvertures, risque de vous exposer à des points de tension dangereux ou d’autres dangers. Un remontage incorrect peut par la suite présenter des risques d’électrocution. 21. Vous devriez tester la réception chaque fois que vous mettez l’appareil en fonction. 22. Examinez les composantes afin de vérifier si celles-ci ne sont pas endommagées. 23. Il existe un très faible risque de perte de confidentialité avec certains appareils électroniques (autres écoute-bébés, téléphones sans fils etc.). Pour l’éviter, s’assurer que le produit n’a jamais été utilisé avant l’achat, réinitialiser l’unité de façon périodique, éteindre l’écoute-bébé quand il n’est pas en cours d’utilisation. 24. Les enfants devraient être supervisés afin de vous assurer qu’ils ne jouent pas avec l’appareil. 25. Les petites pièces de ce moniteur peuvent être avalées par les bébés ou les petits enfants. Veuillez tenir ces pièces hors de portée des enfants. 26. Le produit n’est pas conçu pour être utilisé par des personnes (incluant des enfants) aux capacités physiques, sensorielles ou mentales réduites ou qui manquent d’expérience et de connaissances, à moins qu’on leur ait donné suffisamment de supervision ou d’instructions relativement à l’utilisation de l’appareil par une personne responsable de leur sécurité.
CONSERVEZ CES INSTRUCTIONS Mises en garde · Utilisez et entreposez le produit à une température entre 0° C
(32°F) et 40°C (104° F). · Risque de brûlure, risque d’incendie, risque d’explosion associé
à une mauvaise manipulation de la batterie. · N’exposez pas cet appareil à des froids ou des chaleurs
extrêmes, ainsi qu’à la lumière directe du soleil. Ne l’installez pas près d’une source de chauffage.

·

Avertissement – Risque de strangulation –

Les enfants se sont ÉTRANGLÉS dans des cordons.

Gardez ce cordon hors de portée des enfants (à plus

de 0,9 m). N’enlevez pas cette étiquette.

· Ne jamais placer le moniteur à l’intérieur du berceau ou du parc de bébé. Ne jamais couvrir le moniteur ou l’unité (s) portative avec un article tel une serviette ou une couverture.

· D’autres produits électroniques peuvent causer des interférences auprès de votre caméra IP. Essayez d’installer votre caméra IP le plus loin possible de ces dispositifs électroniques : routeurs sans fil, radios, téléphones cellulaires, interphones, moniteurs de pièces, téléviseurs, ordinateurs personnels, appareils électriques de cuisine et téléphones sans fil.

Stimulateurs cardiaques implantés dans l’organisme

Les simulateurs cardiaques (ne s’applique qu’aux dispositifs numériques sans fil):

L’organisme `Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme. Appuyée par l’Administration des aliments et drogues (FDA) des États-Unis, la firme WTR recommande aux médecins:

Avis aux détenteurs de stimulateurs cardiaques

· Vous devriez maintenir les dispositifs sans fil à au moins six pouces du simulateur cardiaque.
· Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche.
L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs cardiaques causés par les gens qui utilisent dispositifs sans fil à proximité de ceux-ci.

Champs électromagnétiques (EMF)

Ce produit de VTech est conforme à toutes les normes se rapportant aux champs électromagnétiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera sécuritaire pendant de nombreuses années, selon les meilleures évidences scientifiques dont nous disposons aujourd’hui.

Limited warranty
What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.
What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)? During the limited warranty period, VTech’s authorized service representative will replace at VTech’s option, without charge, a Materially Defective Product. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the replacement Products to you in working condition. You should expect the replacement to take approximately 30 days.
How long is the limited warranty period? The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase (90 days on products purchased as Refurbished). This limited warranty also applies to the replacement Product for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the original one-year warranty (90-day limited warranty on products that are purchased as Refurbished); whichever is longer.
*Refurbished products purchased from our online store carry a 90-day replacement warranty.
What is not covered by this limited warranty? This limited warranty does not cover: 1. Product that has been subjected to misuse, accident,
shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech accessories; or 5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase (see item 2 below); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.

How do you get warranty service? To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 5959511. In Canada, go to www.vtechcanada.com or call 1 800-267-7377. NOTE: Before calling for service, please review the user’s manual – a check of the Product’s controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit.
What must you return with the Product to get warranty service? 1. Return the entire original package and contents
including the Product to the VTech service location along with a description of the malfunction or difficulty; and 2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address, and telephone number.
Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/ provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.