OBZ M60 2D Wireless and Bluetooth Barcode Scanner User Manual

User Manual
2D Wireless & Bluetooth
Barcode Scanner Model: M60

Factory Default

S_CMD_00F0

Power Off

X=0026

Note: Scan this barcode, scanner will make a beep and power off. Or long press the scanner button and hold for 15 seconds to power off.

Technical Parameter

| Parameter
---|---
Date Item| Barcode Scanner
Type of Light Source| 617 nm LED white
Decoding Accuracy| ≥4mil
Decoding Ability| 1D: Code 128, EAN-13, ISBN, ISNN, EAN-8,
EAN-128, UPC-A, UPC-E, UCC, Code 32,
Code 93, Code 39, Code 39 Full ASCII,
Codebar, Interleaved 2 of 5, Industrial 2 of 5,
Standard 2 of 5, IATA 2 of 5, Matrix 2 of 5,
MSI Plessy, ITF-14;
2D: QR Code, Micro QR Code, PDF-417,
MicroPDF417, DataMatrix, Aztec Code,
DM Code, Gs1, Gs1 QR Code
Scanning Principle| CMOS
Scan Mode| Manual Scan / Continuous Scan / Auto-sensing
Resolution| 640x480px
The Distance Between
The Scan And The Barcode| 25mm-150mm (13mil 90%PCS)
Bit Error Rate| 1/5 million
Data Saving Mode| Automatic Storage Mode (default) / Instant Upload
Mode (Normal Mode) / Inventory Storage Mode
Storage Ability| 512, 000 Bytes
Connection Ways| 280mA
System Compatibility| DC 5V±5%
Material| iOS, Android, Windows, Linux
Interface| Bluetooth; 2.4Ghz Wireless
Working Current| ABS+PC
Working Voltage| USB-HID
Lithium Battery| 800mA
Charging Time| 2.5h
Battery Working| 4h
Shock Resistance| Withstand multiple 3 meters free fall
Operating Temperature| -20℃~50℃
Storage Temperature| -40℃~70℃
Operating Humidity| 5%-95% RH without condensation

Warning

1. Unboxing: Open the package and check if the accessories are complete. Package included: 1 x Barcode Scanner, 1 x 2.4G USB Receiver, 1 x USB Charging Cable, 1 x Manual. If there is any questions, please contact us at the first time. (email: support@obzshop.com )
2. Charging: LED1 green light always on; When charging is complete, LED1 off.
3. Do not scan the setting barcodes in the manual without instruction, it may cause barcode scanner not work properly.
4. Some symbologies are not enabled by default, if you have request on this, you can find it on user manual “Barcode Settings” to enable it. For more barcodes not available in the user manual, please contact us for help.

USB Receiver Pairing Instructions

Step 1:
Method 1: Press and hold the button for 8 seconds until the scanner LED1 indicator flashing, it enters pairing state.
Method 2: Scan below pairing code I and code II in sequence, the scanner LED1 indicator flashing, it enters pairing state.
Step 2: Then plug the USB receiver into the computer USB port, the scanner LED1 indicator is always on, indicating that pairing is complete.
Step 3: Open notepad or other text on the device, use the scanner to scan compatible barcodes, the barcode data can be output on it.
Note:

1. After scanning the pairing codes /or long press button enter pairing state, please insert USB receiver into computer within one minute. If the pairing is not completed in one minute, you need to scan the pairing codes /or long press button again for pairing.
2. At a same time only one device can be connected. If you need to connect to another Bluetooth device, please turn off the Bluetooth of the original device first and unplug the USB Receiver.

|
---|---
X=0100| X=0103

Bluetooth Pairing Instructions

Step 1:
Method 1: Press and hold the button for 8 seconds until the scanner LED1 indicator flashing, it enters pairing state.
Method 2: Scan below pairing code I and code II in sequence, the scanner LED1 indicator flashing, it enters pairing state.
Step 2:
Open Bluetooth on the mobile device and search for “R&B40” and click pairing. The scanner LED1 indicator is always on, indicating that pairing is complete.
Step 3:
Open notepad or other text on the device, use the scanner to scan compatible barcodes, the barcode data can be output on it.
Note:

1. After scanning the pairing codes /or long press button enter pairing state, please complete the pairing within one minute. If the pairing is not completed in one minute, you need to scan the pairing codes /or long press button again for pairing.
2. At a same time only one device can be connected. If you need to connect to another Bluetooth device, please turn off the Bluetooth of the original device first and unplug the USB Receiver.

|
---|---
X=0102| X=0101

Mobile Phone Bluetooth Connection Guide

Windows Computer Bluetooth Connection Guide

Keyboard ON or OFF in IOS device

Note: Scan above QR code to enable or disable Keyboard in the IOS device.

X=0104

Scan Mode

|
---|---
S_CMD_MT00| S_CMD_020E
|
S_CMD_020F|

Data Saving Mode

|
---|---
X=0010| X=0012
|
X=0011|

Note:

1. Instant Upload Mode: The data will be uploaded to the device immediately after scan, out of range it will not save the data, and there will be alarm beeps out of range.
2. Automatic Storage Mode (default): If the scanner in range, the data will be uploaded to your device directly after scan; if the scanner out of range, will hear alarm beeps, the data will be saved in the memory chip. Press the scanner trigger to upload the saved data after back to range.
3. Inventory Mode: The data will be saved in the memory chip, you can upload data to your device by scan the set code in the manual. (Refer to “Data Upload Instruction in Inventory Mode”)
   Eg: Scan the“Upload all data”, the scanner will upload all data saved in the memory chip.

Data Upload Instruction in Inventory Mode

|
---|---
X=0013| X=0014
|
X=0015| X=0016
|
X=0017|

Transmission Speed

|
---|---
X=0018| X=0025
|
X=0019| X=0029

Keyboard Caps Lock Control

|
---|---
X=0632| X=0633
|
X=0634| X=0635

Keyboard Language

|
---|---
X=0600| X=0608
|
X=0626| X=0609
|
X=0611| X=0620
|
X=0603| X=0627

Buzzer Setting

|
---|---
S_CMD_0403| S_CMD_0402
|
S_CMD_04V0| S_CMD_04V2

Sleep Time Setting

|
---|---
X=1006| X=1030
|
X=1060| X=1000

Barcode Settings

Reverse Barcode Setting

|
---|---
C_CMD_INV1| C_CMD_INV0

All 1D Barcodes

|
---|---
C_CMD_R011| C_CMD_R010

All 2D Barcodes

|
---|---
C_CMD_R101| C_CMD_R100

EAN-8

|
---|---
C_CMD_0801| C_CMD_0800

EAN-13

|
---|---
C_CMD_1301| C_CMD_1300

UPCA

|
---|---
C_CMD_CA01| C_CMD_CA00

UPC-E1

|
---|---
C_CMD_E001| C_CMD_E000

Interleaved 2 of 5

|
---|---
C_CMD_E101| C_CMD_E100

Industrial 2 of 5

|
---|---
C_CMD_IT01| C_CMD_IT00

Codabar

|
---|---
C_CMD_IN01| C_CMD_IN00

Code 39

|
---|---
C_CMD_BA01| C_CMD_BA00

QR Code

|
---|---
C_CMD_3901| C_CMD_3900

PDF 417

|
---|---
C_CMD_QR01| C_CMD_QR00

DataMatrix

|
---|---
C_CMD_PDF1| C_CMD_PDF0

Barcode Conversion

EAN 13 Converts ISSN

|
---|---
C_CMD_DM01| C_CMD_DM00

EAN 13 Converts ISBN

|
---|---
C_CMD_SN01| C_CMD_SN00

UPCA Converts EAN13

|
---|---
C_CMD_BN01| C_CMD_BN00

Additional Code

2-bit Additional Code for EAN-8

|
---|---
C_CMD_CAE1| C_CMD_CAE0

5-bit Additional Code for EAN-8

|
---|---
C_CMD_0821| C_CMD_0820

2-bit Additional Code for EAN-13

|
---|---
C_CMD_1321| C_CMD_1320

5-bit Additional Code for EAN-13

|
---|---
C_CMD_1351| C_CMD_1350

2-bit Additional Code for UPC-E1

|
---|---
C_CMD_E121| C_CMD_E120

5-bit Additional Code for UPC-E1

|
---|---
C_CMD_E151| C_CMD_E150

2-bit Additional Code for UPCA

|
---|---
C_CMD_CA21| C_CMD_CA20

5-bit Additional Code for UPCA

|
---|---
C_CMD_CA51| C_CMD_CA50

End Character

|
---|---
S_CMD_05T1| S_CMD_05T2
|
S_CMD_05T4| S_CMD_05T0

Prefix Setting

|
---|---
S_CMD_0501| S_CMD_051R

Eg: Add prefix “A”
Step 1: Scan above code to enter into “Add Prefix”;
Step 2: Scan above code to add “Prefix”;
Step 3: Scan the numeric code correspond to “A”, the ASCII value of A in Hexadecimal is “4” “1”
(Refer to Appendix 1 & Appendix 2);
Step 4: Scan “saved” code to save (Refer to Appendix 1).

Suffix Setting

|
---|---
S_CMD_0507| S_CMD_057R

Note: The method of adding the suffix is the same as the prefix.

Data Codes

Appendix 1:

|
---|---
S_CMD_D000| S_CMD_D001
|
S_CMD_D002| S_CMD_D003
|
S_CMD_D004| S_CMD_D005
|
S_CMD_D006| S_CMD_D007
|
S_CMD_D008| S_CMD_D009
|
S_CMD_D00A| S_CMD_D00B
|
S_CMD_D00C| S_CMD_D00D
|
S_CMD_D00E| S_CMD_D00F
|
S_CMD_DFFF|

Appendix 2 :

FAQ:

1.Q: Why does the USB receiver display a driver error (BLE Remote KMA Dongle) when connecting to the computer?

A: Because this error prompt (BLE Remote KMA Dongle) is for USB receiver upgrade, it does not affect pairing and usage.

2.Q: Why can't the scanner read the reverse barcode (white code on black background)?

A: The reverse barcode is default disable, please scan the enable setup code on user manual page 13 to enable it.

For more setting, welcome to contact us for tech support.
Service support: support@obzshop.com

THANK YOU FOR CHOOSING OBZ.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>