Growatt VITA550 Portable Power Station User Manual

VITA 550
User Manual ( V1.0)

IMPORTANT SAFETY INSTRUCTIONS

WARNING – Please read the instructions carefully before you use the product.

• You must follow the usage and precautions in the User Guide when using this product. Growatt is not responsible for any damage caused by using the product not in accordance with the User Guide.

Usage

• Read all the instructions before using the product.

• Do not put fingers or hands into the product.

• Do not stack any heavy objects on the product

• To reduce risk of damage to electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.

• Please avoid impact, falls or severe vibrations when using the product. Do not use the product after it has been hit by a strong force or dropped from a height.

• Do not use wires or other metal objects to cause product short circuit.

• The use of unofficial component is strictly prohibited, which may result In a risk of fire, electric shock, or injury to persons. For replacement, please check the relevant purchase information on the Growatt official website (https://www.growattportable.com). Growatt is not responsible for product accidents and malfunctions caused by the use of products not officially provided by Growatt.

• Do not disassemble the product in anyway or pierce the product with sharp objects.

• Make sure the machine is turned o ffbefore installing or unplugging any modules of the machine, otherwise the power interface may be damaged.

• Avoid exposing the product to water. Do not immerse the product in water or get it wet. Do not use the product in rain or humid environment, otherwise the battery may catch fire or explode.

• If you accidentally drop the product Into water while using it, please stay away from the product and keep it in a safe open area until the product is completely dry. The dried product should not be reused again and should be disposed of property according to the disposal guide in this manual.

• Do not use the product in an environment of strong static electricity or magnetic field. Otherwise, it may cause the product to malfunction or serious damage.

• Do not place this product in a microwave or pressure cooker.

• The operating environment temperature of this product is from-20°C-45°C /-4°F-113°F. Using this product in a high temperature environment may result in a fire or explosion, Conversely, using the product at ultra-low temperature will seriously degrade the product performance and may cause the product to stop working.

• Do not use any batteries or appliances which have been damaged or modified. Damaged or modified batteries may exhibit unpredictable dangers resulting in fire, explosion or risk of injury.

• If the product catches fire, it is recommended to use fire extinguishing equipment according to the following priorities: sand, fire blanket, dry powder, carbon dioxide fire extinguisher, water, or fog.

• it is recommended to use a moisture-proof bag to avoid soaking in water if it is used in a humid environment (e.g riverside. seaside, lakeside. etc. Take sufficient measures to prevent electric shock, immediately stop in a safe, waterproof, open and ventilated area, and contact the Customer Support.

• It is forbidden to force the fan to be blocked during use, or place the product in a non-ventilated environment. a closed environment. and a dusty environment

• This product is not suitable for medical equipment and precision instruments (including but not limited to CPAPIECM(Th related to personal safety

• Electromagnetic fields are inevitably generated dunng the use of power products. which may affect the normal operation of implantable medical equipment or personal medical equipment. Please consult the manufacturer in advance to confirm the restrictions and precautions for using the equipment, and operate strictly according to the requirements.

• You may use a dry cloth to dean o ffthe din on the product.
  Storage and Transportation

• Keep the product out of the reach of children and pets. If your child accidentally swallows product parts, seek for medical help right away

• For long-term storage. keep the battery level between 30%-60% and store it in a temperature range of -10’C-20’C /14’F-68″F in a room with low humidity and no corrosive gas. If the battery of the product is in a low -power state for a long time, the battery will enter a deep sleep mode, and the battery may even be damaged in a serious low-power state. To wake the battery from deep sleep. please recharge the portable Dower station

• Do not place the product near a heat source, such as in a fire or a heating furnace. The product should be stored In a dry environment Do not place the machine In water or where it may leak

• Be sure to fix it well dunng transportation to avoid vibration and impact, and make sure that the power of the product is less than 30%.

• Do not store or transport this product with eyeglasses. watches, metal necklaces. hairpins, or other metal objects
  Disposal Guide

• Be sum to completely discharge the machine battery before placing the machine battery in the proper disposal location per local rules and regulations Batteries are hazardous chemicals and should not be disposed of in ordinary trash cans. Follow local laws and regulations for battery recycling and disposal.

• If the product itself fails and the battery cannot be fully discharged, please contact a professional battery recycling company for further processing.

• Rease dispose of batteries teal cannot be charged. over-discharged. damaged (drop. strong impact, severe vibration, short circuit. falling into water, etc

Package Contents

Getting to know the VITA 550

LED Display

Battery Percentage Display When the product is in a state of net charge, this icon indicates the last bar beating. Wi-Fi Indicator: When Wi-Fi and Bluetooth are turned on. the Icon is always on. When Wi-FI and Bluetooth are turned off, the icon is off. When the Wi-Fi configuration information is reset. the icon flashes.
How to Use
Before use please put VITA 550 on a clean and flat ground to ensure that the machine will not be in contact with liquid or tilted, and check whether there are foreign objects on the body.
Product ON/OFF
A) Press and hold the power button for 1s to turn on the whole machine, and the LCD screen will be lit after turning on.Press and hold for 3s to turn o :lithe whole machine, and the LCD screen will be turned o ffafter shutting down. B) When the product does not have any operation for 5min, it will enter the sleep mode. At this time, the LCD screenwill automatically turn off. When the external charging input or key operation, the LCD screen lights up. To activate the LCD screen, short press the power button. The sleep time can be set on the APP. C) The default standby time of VITA 550 is th when the device is not at charging or discharging status, the product will automatically shut down after 1h. The the standby time period also can be set by the APP
USB Power ON/OFF
D) When the screen Is on, short press the USB power button to use the USB output supply. Short press the USB output button again to turn o tithe USB output. E) The maximum output power of the USB-A port is 12W, the maximum output power of the USB-A fast charging port is 18W, and the maximum output power of the USB-C port is 100W.
DC Power ON/OFF
F) When the screen is on, short press the DC power button, the indicator light is on, and the DC output port (including the car output port and the DC 5521 output port) can be used. Short press the DC output button again. the indicator light will be off, and the DC output will be turned off. G) The DC 5521 output port allows a maximum output current of 3A, and the car output port supports a maximum current of 10A.

AC Power ON/OFF
H) To turn on the AC output supply, short press the AC power button, and you will observe the AC power indicator lights up, and the AC output port can be used. Short press the AC output button again. you will observe the AC power indicator lights o Hand the AC output will be turned off. I) The total output power of the AC output ports is up to 600W (across all ports). When the total output power exceeds the rated power, the product will trigger overload protection, cut o ffthe AC output and prompt an overload alarm. Unplugging the AC load will clear the alarm and restore normal AC output.
Wireless Charging
J) Wireless charging Is activated when the DC power is turned on. You can charge wirelessly by placing the device within the wireless charging range on top of the product. This feature is only available for devices that support wireless charging. You can check the wireless charging status by charging status of your smart phone
LED Light Power ON/OFF
K) When the screen is on, short press the “Light” button to turn on the LED lighting, and when the LED light is on. Short press the “Light ” button again, the LED lighting flashes. I) Short press the LED lighting button again, the LED lighting is turned off. The LED lighting patterns cycle in sequence. LED lighting brightness can be set on the APP. N) The light brightness also can be adjusted by the APP.
Getting to Know the VITA 550
If your portable power station has not been used for more than 3 months, it is recommended to discharge the battery to 0% and then charge it to 100% to avoid calibration errors after a long time of inactivity.
How to Recharge
Notice Before Charging

• This product supports wall charging, solar panel charging, and car charging.
• This product supports charging and discharging at the same time. In the case of AC charging, only DC discharge is supported.
• Do not use a charging cable not officially designated by Growatt for charging. Otherwise, Growatt will not be responsible for any consequences.
• When charging, please make sure to place the machine away from liquids, flammables, and combustibles.
• If the product is charged Immediately after full-load discharge, over-temperature protection may be triggered for battery safety reasons It typically takes 2-3 hours for the product to cool down before another charge.
• The products recharging temperature range is 0°C-45°C f 32°F-113°F. Charging within the ideal charging ambient temperature temperature 20°C-30°C 168°F-86°F can greatly extend the battery life.

AC Charging
The AC charging ports for the VITA 550 are located on the right side of the product. Please follow the instructions below to connect and recharge the product.

• The AC charging port of this product is configured for AC charging simultaneously. There are two charging speed modes: fast charge and slow charge, for users to choose.
• AC charging is in fast charge mode by default. You can switch between AC fast and slow charge modes through the APP or by short pressing the fast and slow charging switch button. After restarting, it will remember the last used mode.

The Car charging port for the VITA 550 is located on the left side of the product. Please follow the instructions below to connect and recharge the product.

• VITA 550 can be charged using the car port on the car. This function needs to be used after the car is ignited to prevent the car battery from being depleted and unable to start. At the same time, ensure that the car charger port and the car cigarette lighter are in good contact. Growatt will not be responsible for any loss caused by not operating in accordance with the instructions.

PV Charging
The Vita 550 supports the character of rated power 240W and DC voltage output of 12V-24V solar panels to charge this product. Please use it strictly in accordance with the solar panel specifications. The series and parallel connection methods of solar panel to ensure that you are connecting the solar panels correctly for charging. If the product is damaged due to incorrect connection not in accordance with the instructions, Growatt will not be responsible for the free maintenance of the machine within the warranty period. The solar charging ports for the VITA 550 are located on the left side of the product. The VITA 550 DC input range is 12V-24V. You must ensure that the input voltage is within the specified range. When the Input voltage exceeds 24V, the excessive voltage may cause damage to the product and the VITA 550 will trigger over voltage protection.

• This product doesn’t support AC and solar panel charging simultaneously. If connected at the same time, the AC charging method will be preferred.

 A) Connect with Growatt Solar Panels
You can charge the VITA 550 by connecting up to two 12V solar panels in series or using one 24V solar panels. Connect the MC4 connector on the solar panel to the MC4-XT60 adapter cable, and supply power to the VITA 550 through the XT60 port on the side of the VITA 550. When you need to connect two solar panels. it is recommended to connect the two solar panels in parallel, and then use the MC4-XT60 adapter cable to connect to the VITA 550 for charging.
24V1200W DC Solar Panels X 1

El) conned with Other Branded Solar Panels
Users can patchier.° Other brands Of solar panels (sumer:mg ISIC4 Connected to wiser We VITA 550 through her Orin <None19 As tog as the frOasge and current are soh., :no DC opt: range of VITA 550 (12-24WICA Slow 240W Max), users can charge VITA 550 Gough the MG4 to XT 60 adapter Cabe. nesse follow the figure below to conneCt the post ve negative Wiles Incorrec: connecton may resell n damage to Me Novicki. During the warranty pelw of prod.% is damaged due It) (prat :y problems of the mild-party Solar panNS Or improper 00erfitiOn. Grower is not reSCOnSible for free ma.nterance during Me ‘Tagil* Period

Watt+ Feature
To avoid nonfat on failure raised by charging overload protection Of electncal oeurpowni when the Iola’ output power exceeds the rated output pewee. it is recommended to enable the Watt. feature on no APP first so Nal the product can spiry pnwor to hghccnyrs devices.
Wnen awe the Wag+ feature. il is enportant to note Pa Ichowngs:

• This product turns u Mile Wall. feature by default. This feature can be turned on or o roy us ng the MyGro APP.
• This leatate is not &reliable in the following cases. a) When :ere AC output is used Synchrthousty In the charDing state D) When Ns feature is :dined oft.
• The Watt+ feature Is serfage kr heating equipment and electrcal eciapment but not tor Bl elect/Ice appreence6 Ills not suilabe fcr some OBTAT cal appliances °gripped with voltage profectrn or equipment that requires high voltage accuracy of the °gatemen] %Thaler device can use tie Walt +leatiee. please refer to the actual lest. PS’ The Melba AC cutout port has 6002: rated power and 1230W peak Power II is recarmerdec to warm the functional wow of the den -w before JUL and ensure That the tolai power of at devices is lower than the rated Wise’

How to Connect to APP
PaIrrg the Product win YOU’ Device
When the product ° connected to the APP for to Snit Inc. you need to use Sluelooth paring for network eorkqurebOn Please get as close as possible to the product and make sure :ere ohcne Is within the Slues:40 coverage of the device.

• Download -MyGro APP troa Ape Slew or Googie Phy Or Wu may download 11 born the official f webble MTh rAswergovarthwetabfe him or +min the OR code nem the sicker attached with the dere° (For ilistame ✓ust ycu need to Icrfow the instnacgom and complete account registration ch APP).
• You may choose titter of the Mow ng ways to canned you Portable WWI stiber. Remote iNI-FICrannectch ) Go to the Deviw page and dick Ado Device. Or select the rag button at the lop r 914 of the pap. hen select Adel Device 5) Shoal press the Wt F. Reset Ninon to send Illuelooth 8 Whh signals and connect with your moNle devices Pcdow he trSIn.C101 on the APP end finish the rest of tie setup.

Local Gutman ONIITC4
a) Go to rho Dente page and click Pair via Brueteeth Or Wed the ‘s’ button at the top rigM or the page. Men seed Fast Pair b) Shon meta the Wu A Rebel button to sane Bruateoth S WI-Fr signals and correct vath your morale devises C) Felled: the astruclaan on the API, and finsh the rest of the set.o. d) Once you =wrote the connection setup. you may mannerly control your portable =net station almost, bear connecticn (Bluetooth) or remote connection NATI).

Pairing the Product with Your Device
If the device is already bound to a mobile device, you need to un-pair the product from the current device before re-pairing it to the new mobile device. After re-pairing. you can use the new mobile device to remotely control the product

• Un-pair from the existing device. Method 1: Un-pair using APP
  a) Go to Device select the product from the device list to enter the product details, and then click to enter ****the setting page.
  b) Click Remove Device and confirm. Method 2: Reset BluetoothiWi-Fi to un-pair c)Press and hold the Wi-Fi Reset button on the device for 3 seconds until you hear a beep. The device painng record is cleared successfully.

• After successfully un-pairing the device, please login to the APP on the new mobile device to pair the device. (Please refer to the steps in (.Pairing the Product with Your Device) .

Using Multiple Mobile Devices to Control the Product
If multiple users need to remotely control the product, the master account needs to authorize other MyGro accounts to allow other mobile devices to control the product.

• Go to Device,select the product from the device list to enter the product details, and then click the to enter ****the setting page.
• Select Share device.enter the account ID of the device to be shared. and send a pairing invitation.
• After the invited account accepts the invitation, the device is shared successfully.
• If the master account unpairs from the device, the associated shared account will be unpaired simultaneously and the device cannot be controlled remotely.

Technical Soecification

FAQ

Can I take VITA 550 on a plane?

– No, you can’t. This product is a lithium battery product. According to international air transport regulations, lithium battery products exceeding 100Wh cannot be carried on the plane.

Why does the VITA 550 not work properly when the total output power of the device is within the rated power of the VITA 550?

– First, please check whether the charge of the product is too low and charge it sufficiently prior to use. Secondly, check if the surge power usage of the equipment exceeds the instantaneous peak power of the VITA 550. If so, you should use Growatt higher power products.

Why does the VITA 550 make noise when in use?

– The product contains air cooling system, and the built-in fan helps the product to dissipate heat. A slight noise when the product is in use Is normal.

Will VITA 550 automatically shut down?

– VITA 550 supports power saving function. By default, the LCD display will turn o Rafter 5 minutes of inactivity, and will automatically shut down after another 1 hour of inactivity. You can change the automatic screen-o ff and automatic shutdown time via MyGro APP.

How to clean VITA 550 ?

– If the VITA 550 needs to be cleaned, please wipe it with a dry, non-abrasive cloth or use a special cleaner for LCD screens to achieve better cleaning results. Do not let water enter the inside of the product, which may cause damage to the circuit or parts’

Error Codes

Trobleshooting

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (I) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class ft digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not he less than 20(.411(8 i riches) dur ing normal operation.
That chanms cr modilta dons no t ewes* a pprowed by the partyresponsibp br co rnpl lano2could liod the Lt:-4ar’s authority to o fera tot. F e. equiprient
This device contains Licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (13)/N1113-3(B).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>