CASIO QW-5703 Men Watch User Guide
- June 8, 2024
- Casio
Table of Contents
CASIO QW-5703 Men Watch
Operation Guide 5703
You can also find information about operational procedures at the CASIO website. https://support.casio.com/global/en/wat/model/5703/
- Your watch may differ somewhat from the one shown in the illustration.
Crown Operations
Some water-resistant models (10BAR, 20BAR) have a screw-in crown. When you
need to perform a crown operation, rotate it towards you to unscrew it. Then
pull the crown out. Avoid applying undue force when pulling. The watch loses
its water resistance while the crown is unscrewed. After performing a crown
operation, fully screw the crown back in.
If your watch has a rotary bezel…
You can rotate the bezel to align its ▼ mark with the minute hand. Then you
will be able to tell how much time has elapsed since aligning the ▼ mark.
Specifications
Other: Low battery
alert
Specifications are subject to change without notice.
SETTINGS
To adjust the time setting
Note
- Take care that you set the correct AM or PM time.
- When changing the time, move the minute hand four or five minutes past your final setting, and then back it up to the setting you want.
To change the day indicator setting
Note
- The day indicator setting uses a 31-day month. Make adjustments for months of shorter lengths.
- Avoid changing the day indicator setting between the hours of 9:00 p.m. and 4:00 a.m. Otherwise, the day indicator may not change correctly at midnight.
To change the day of the week indicator
Note
Avoid changing the day of the week indicator setting between the hours of
9:00 p.m. and 4:00 a.m.
Low Battery Alert
- The second hand will jump at two-second intervals to alert you when battery power is low.
- Have the battery replaced as soon as possible after low battery alert is indicated.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>