Jiangsu Jinshi Legend Technology ZMLE20N Projector User Guide
- June 5, 2024
- Jiangsu Jinshi Legend Technology
Table of Contents
Jiangsu Jinshi
Legend Technology ZMLE20N Projector
User Guide
SAFETY INSTRUCTIONS
Before use. please read the product instructions carefully and keep them
properly for use in case of urgent need.
During product projection. it is forbidden to block the air inlet or outlet of
the product to avoid damage caused by excessive machine temperature:
Products are not allowed to fall or strike from the high to avoid damage to
the machine;
To avoid eye injury. do not look directly into the machine lens.
If there is any problem with the product do not disassemble it without
permission. Please contact professional after-sale personnel for assistance.
WARNING
Do not disassemble, bump, squeeze or throw into the tire. If there is serious
swelling, do not continue to use. Do not use the battery after it is soaked in
water. Do not expose to high temperatures.
THE ANNOUNCEMENT
Our company has always been in the spirit of excellence, always committed to
improving, perfect product performance, to provide users with high quality,
competitive prices of products. All pictures and function descriptions in this
manual are subject to the material object and factory default. Our company
reserves the right to improve the product functions and man-machine interface
described in this manual without prior notice. Please take the material object
as final.
Please be sure to take good care of your machine. We will not be responsible
for any loss caused by software, hardware misoperation or maintenance, or any
loss caused by disclosure of personal information to a third party. The
company will not be responsible for any unexpected losses that may occur
during the use of the manual or any third-party claims arising from the use of
the product.
ITEM LISTING
Note: Thank you very much for buying our products. Please check whether the product received is consistent with the list If the products and accessories you receive do not match the list, please contact customer service immediately.
HOME PAGE
-
The home page contains seven functions: file management signal source, settings, customer service, and MirocaSt. Airplay, and DLNA. When selected, press ‘OK’ to enter.
-
Computers, set-top boxes, game consoles, and other equipment are viewed as signal output end, and home projectors as signal input end. The output end needs to have an HDMI interface.
-
Connect the output terminal and the input terminal through the HDMI cable, and select the signal source card of the projector, as shown in Figure 2.
SETTING
- Select ‘Settings on the home page and press the ‘Or to enter. You can set Bluetooth, network, image mode, sound, and other system functions. os showed in FIG. 3 and FIG. 4 below.
BLUETOOTH
- The first item in the menu bar at the top of ‘Settings” is ‘Bluetooth’, as shown in Figure 7. This Bluetooth is different from the Bluetooth in Bluetooth audio (receiver). This Bluetooth uses the projector as the ‘host’ (sender) to connect to external Bluetooth audio. Bluetooth headset, and Bluetooth keyboard and mouse. The operation method is similar to an android phone connected to a Bluetooth headset.
- Click “Bluetooth Switch’ to enable/disable the Bluetooth function.
- Click ‘Search’ to search for available Bluetooth devices nearby.
- After the search is complete, click the “Device Name (default is Home Projector).
- In the list below, you can view nearby Bluetooth devices. Select the desired Bluetooth device and press ‘Ok’ to connect/unpair the Bluetooth device.
NETWORK
- The second item in the top menu bar of “Settings” is ‘Network’. See Figure 5.
- Click Network Information to query the current connected network information.
- Press ‘Or to “scan’ to search for available networks. See Figure 6.
- After “scanning’ is completed, select the required hotspot in the network list and click “Confirm”, then input the correct password to connect the projector to the hotspot (WIFI). See Figure 7 and Figure 8 below.
IMAGE MODE
- The third item in the top menu bar of ‘Settings is “Image Mode. See Figure 9
- Select ‘Image Filter in the image mode list and press ‘left/right’ to switch the image mode. Under ‘User Mode’, parameters can be customized and the grey state list con be activated. Press ‘OK’ to enter parameter adjustment and press ‘left/right’ to ‘increase/decrease parameter. See Figure 10.
SOUND SETTINGS
- The 4th item in the top menu bar of ‘Settings is ‘Sound Settings. See Figure11
- Automatic volume. Press the ‘left/right’ to ‘turn on/turn off, as shown in Figure 12.
- Select ‘Sound Mode in the list of Sound Settings, and press ‘left/right’ to switch the sound mode. In ‘User Mode’, you can customize parameters and activate the grey state list. Press ‘OK’ to enter parameter adjustment and press ‘left/right’ to increase/decrease” parameters. See Figure 13
OTHER SETTINGS
- The fifth item in the menu bar at the top of ‘Settings’ is ‘Other Settings’, which can be used for language switching, factory setting restoration, screen flipping, system upgrade, and other functions, as shown in Figure 14.
- Select language in the ‘Other Setting’s list (FIG. 14). Press .10K” to enter the language list (FIG. 15), and press ‘OK’ to switch.
- In the ‘Other Settings’ list select ‘Screen Flip” and press the ‘left/right’ to switch the projection mode. See Figure 16.
- ‘Restore Factory Settings’: Restore system data to factory settings.
FILE MANAGEMENT
- Select the ‘File Management on the home page and press ‘Ok’ to enter. You can open data in local files or mobile storage devices.
- In the file manager, click the categorized entry of video, music, and picture to enter the corresponding detailed directory. See Figure 19.
- Press the ‘Return key to go back step by step when you go to other folders in the USB flash disk.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with the FCC Radiation exposure limit set forth for the
uncontrolled environments This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>