SBS TEJZSPEAKWITCH20BTK WITCHER 20 Wireless Speaker User Manual
- June 9, 2024
- sbs
Table of Contents
SBS TEJZSPEAKWITCH20BTK WITCHER 20 Wireless Speaker
SPECIFICATION
- Wireless: 5.0
- Working range: 10 m
- Power input : 5 V D.C. 1A
- Speaker power: 10W*2
- Impedance: 4 Ω
- Frequency: 150 Hz-13 kHz
- Battery capacity: 2400mAh
- Standby time: 120 days
- Charge time: 2.5 hours
- Working time: 5.5 hours
- Automatic Power OFF
- after 10 minutes
For other information please contact us at [email protected]
Description of the buttons and connectors
- Continuous pressure to increase the volume, one click for the next song.
- Play – Pause.
- Change audio source (Wireless, TF card, USB key, AUX).
- Change lights or stop them.
- On/off button.
- Continuous pressure to decrease the volume, one click for the previous song.
- Audio output via 3.5mm cable.
- USB memory input
- TF card memory slot.
- Type-C charging socket
Instructions for use
Turning on and pairing:
Press the ON/OFF button (5) until a confirmation sound is heard.
Search in the Bluetooth® settings of the telephone for “JAZ WITCHER 20”. The
speaker will automatically turn off after 15 minutes if not connected to any
device.
Shutdown:
Press the ON/OFF button (5) until a confirmation sound is heard.
Play or pause audio:
Press the Play/Pause button (2) to play or pause a song.
Volume adjustment:
To increase the volume, press and hold + (1).
To decrease the volume press and hold – (6).
Next/previous song:
Press the + key (1) once to advance.
Press the – button (6) once to repeat.
Alternative playback modes:
USB key: insert a key with your favourite songs saved on it into the USB slot
(8).
Micro-SD memory: insert a card with your favourite songs saved on it into the
micro-SD slot (9).
Aux: connect an external player using a 3.5mm mini-jack cable (7).
Charging the speaker:
Insert the included cable into the Type-C socket (10) and connect it to a
suitable USB charger.
The LED will light up red and go off when charging is complete.