IKEA VALBILDAD Induction Hob Instruction Manual
- June 8, 2024
- Ikea
Table of Contents
IKEA VALBILDAD Induction Hob
WHAT IN BOX
Caution
Connection
Installation
Product description
- Single cooking area (160 mm) 1400W, with Booster 2100W.
- Single cooking area (160 mm) 1400W, with Booster 2100W.
- Control panel
Pot detection
Each of the cooking areas is equipped with a system to detect the presence of a pan. The pan presence detection system recognises pans with a magnetisable base suitable for use with induction hobs. If the pan is removed during operation, or if an unsuitable pan is used, the display shows the symbol .
Residual heat indicator
The residual heat indicator is a safety feature, indicating that the surface of the cooking area is still at a temperature of 50° C or above, which may cause burns if touched by a naked hand. The digit for the corresponding cooking area displays H
Control panel
- On/Off
- Power level in icator
- Button to select coo ng area
- Power level / Timer control
- Cooking time indicator
Functions
Boost function
The Boost function can be used to provide extra power in a cooking area for 5 minutes. This function is useful to boil up large amounts of water.
Activation:
-
The Boost function can be used to provide extra power in a cooking area for 5 minutes. This function is useful to boil up large amounts of water.
-
Activation:
- Select one of the cooking areas.
- Press “+ ” until reaching level ” 9″.
- Press again to set the Boost Function.
- The corresponding digit will display P.
The Boost function is programmed to last for 5 minutes.
-
Deactivation:
- Select one of the cooking areas with the Boost Function active.
-
Press ” -“.
- It will also deactivate automatically after 5 minutes.
Child lock
- This function prevents an accidental operation of the appliance. Confirmation is given when the digit displaysL . If an area is still hot, then H and L will alternate.
- Activation:
- Turn the hob on, make sure that none of the cooking areas are active.
- Press and “ ” together and release.
- Press “ “again.
- The cooking area digits display L
- Temporary deactivation:
- Press button and button “- ” together and release.
- The function is deactivated while the hob is on. If it is turned off and then on again, the function will still be active.
- Permanent deactivation:
- Turn the hob on, make sure that none of the cooking areas are active.
- Press and “-” together and release.
- Press “ ” again.
- The function is deactivated. If the hob is turned off and then on again, it is no longer displayed L
Timer (generic)
The timer is a countdown that can be set to run for from 1 to 99 minutes. At the end of the set time a buzzer will sound, which can be silenced by pressing any of the buttons. The cooking areas operate independently while the timer is working.
- Activation:
- With the hob on, make sure that none of the cooking areas are active.
- Press button “+” and button “-“together.
- The timer digit shows “0 0”.
- Set the time using “+ ” and” -“.
- Do not touch anything else for 10 seconds and the timer will start to count down. When the value is ” 0 0 ” pressing”- ” sets it to 30 minutes. Repeat these operations to modify a value that has already been programmed.
- Deactivation:
- With the hob on, make sure that none of the cooking areas are active.
- Press”+ ” and ” – ” together.
- Set “00” using ” + ” and “-“
- Do not touch anything for 10 seconds.
Cooking area timer
This timer is a countdown to turn off a specific cooking area, and can be set to run for from 1 to 99 minutes. During this time the cooking area will work normally. The cooking areas are independent and can therefore be programmed individually. At the end of the set time a buzzer will sound, which can be silenced by pressing any of the buttons.
- Activation:
- With the hob on, a pan in position, and the cooking area operating:
- Select the cooking area required and set the power desidered.
- Press “+” and “-” together.
- The timer digit shows “0 0″a dot indicator, next to the corresponding cooking area, starts blinking.
- Set the time using “+ ” and”-“.
- Do not touch anything else for 10 seconds and the timer will start to Count down.
- When the value is ” 0″ pressing”- ” sets it to 30 minutes. Repeat these operations to modify a value that has already been programmed.
- The timer can be set for both cooking areas. The timer will show the shortest countdown of the two.
- Deactivation:
- With the hob on, a pan in position and the cooking area operating:
- Select the cooking area required.
- Press “+ ” and ” – ” together.
- Set “0 0” using “+” and “-“.
- Do not touch anything for 10 seconds.
Technical data
| Unit| Value
---|---|---
Type of product| | Built-in Hob
Dimensions
| Width| mm| 290
Depth| mm| 520
Min./max height| mm| 54
Total power| W| 3700
Parameter| Value
---|---
Power supply voltage/ frequency| 220-240 V, 50 Hz;
220 V; 60 Hz ;
Weight of the appliance| 4,5 Kg
Energy efficiency of Hob
Model identifier
| VÄLBILDAD
204.675.92
---|---
Number of cooking areas| 2
Cooking technology| Induction
Diameter of cooking areas| Ø 160 mm
Energy consumption per cooking area (electric cooking)| ****
187 Wh/kg
Energy consumption of the hob (electric cooking)| 187 Wh/kg
To download the full version visit www.ikea.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>