PHILIPS SPT6407 Wireless Keyboard Mouse Combo User Manual

PHILIPS SPT6407 Wireless Keyboard Mouse Combo

Function overview of the keyboard

1. Lock fn function
2. Screen brightness –
3. Screen brightness +
4. Multi screen display
5. Return
6. Search
7. Prev song
8. Play/Pause
9.  Next song
10. Mute
11. Volume –
12. Volume +
13. Input method switching
14. Lock screen
15. 2.4G wireless mod
16. Bluetooth mode
17. Bluetooth mode 2
18. Calculator
19. Low battery indicator
20. Caps lock indicator
21. 2.4G wireless mode indicator
22. Bluetooth mode 1 indicator
23. Bluetooth mode 2 indicatorr
24. ON/OFF switch
25. Battery door

Function overview of the mouse

1. Scroll wheel
2. Left and right buttons
3. Wireless receiver
4. Bluetooth mode 2 indicator
5. Bluetooth mode 1 indicator
6. 2.4G wireless mode indicator
7. Mode switch button
8. Optical sensor
9. ON/OFF switch
10. Battery door

2.4G wireless connection guide

Push the battery door away.

Pull off the battery insulating film. Turn on the power switch.

Take out the receiver and close the battery door. Plug the receiver into the USB port of a PC. Note the factory default setting of the connection mode of keyboard and mouse is 2.4G mode If the connection is successful. the 2.4G mode indicator will automatically turn off.

Keyboard Bluetooth connection guide

Note make sure that the keyboard power is on before Bluetooth pairing.

Select the Bluetooth mode to be connected, short press the mode key, and the corresponding indicator on the top will flash slowly; long press the Bluetooth mode switch key again, and the corresponding indicator on the top will flash quickly, and then enter the waiting for Bluetooth pairing . Turn on the Bluetooth of your computer or other devices, search and select Philips SPK6407 or SPK6407 and start Bluetooth pairing until the connection is completed.

Note
Bluetooth 5.0 is not supported on Windows 7 and below; 2. The device ID for Bluetooth 3.0 is Philips SPK6407, while for Bluetooth 5.0 is SPK6407.

Mouse Bluetooth connection guide

Note make sure that the mouse power is on before Bluetooth pairing.

• Short press the mode switch button to select the Bluetooth mode to be connected, and the corresponding indicator light on the top will flash slowly: long press the Bluetooth mode switch key, and the corresponding indicator light on the top will flash quickly, then enter the waiting for Bluetooth pairing.
• Turn on the Bluetooth of your computer or other devices, search and select Philips SPK7407 or SPK7407 and start Bluetooth pairing until the connection is completed.

Note

1. Bluetooth 5.0 is not supported on Windows 7.
2. The device ID for Bluetooth 3.0 is Philips SPK7407 while for Bluetooth 5.0 is SPK7407.

Mode switching method of the keyboard

The keyboard has three channels, 2.4G, Bluetooth 1 and Bluetooth 2, which can connect three devices at the same time. 2. Mode switching. Short press the mode switch button, the corresponding mode indicator on the top will be on for 3 seconds, and then it will be off. The switch to the corresponding equipment is completed. If the mode indicator is flashing slowly, it means that the mode has not been connected.

ios/Mac/Win layout switch

Press andhold for 3 seconds to switch the system layout.

iOS

Mac Wire Note the default setting is Windows layout.

F1-F12/ multimedia function switch

The factory default setting of F1-F12/ multimedia function keys is multimedia function. Press this key combination, and switch to F1-F12 function. Press it again to switch back to multimedia function.

Mode switching method of the mouse

1. The mouse has three channels, 2.4G, Bluetooth 1 and Bluetooth 2, which can Connect three advices at the same time.
2. Mode switching.
3. Short press the mode switch button, the corresponding mode indicator on the top will be on for 3 seconds, and then it will be off.
4. The switch to the corresponding equipment is completed.
5. If the mode indicator is flashing slowly, it means that the mode has not been connected.

Packaging contents

1. Wireless keyboard and mouse
2. Wireless receiver
3. User manual/warranty card
4. AA battery inside mouse
5. AAA battery inside keyboard

System requirement

1. 1 x USB port
2. Bluetooth 3.0/Bluetooth 5.0
3. Windows 7,Windows 8,Windows 10 or later, Android 3.2 and above; Mac OS 10.5 or later

Note
Multimedia functions are partially invalid in different OS versions.

Technical specifications

1. Connectivity: 2.4GHz/Bluetooh 3.0/Bluetooh 5.0
2. Working distance: 2.4GHz about 15m/Bluetooh about 10m
3. Number of buttons: 4
4. Button lifespan: 3 million clicks
5. Keyboard keys lifespan: 10 million keystrokes
6. Resolution: 1600 DPI
7. Power supply: 1AA Philips battery(mouse), 1AAA Philips battery keyboard
8. Interface: USB wireless receiver
9. Mouse size: 110.2×65.6×34.8mm
10. Keyboard size: 432.8×136.4×21.9mm
11. Product weight: 649g : 108

Trouble shooting

1. Make sure that the USB wireless receiver of the product is correctly plugged into the USB port of the computer.
2. Make sure the computer meets the minimum system requirement.
3. If the distance between the product and the receiver exceeds an effective range, please reduce the distance for better performance.
4. If you can’t solve the problem, please try to find the solution from Philips website or nearest retailer.
5. Please do not disassemble the product by force.

Attention

1. Photoelectric technology can correctly detect the movement of mouse on most surtfaces.
2. Do not use the mouse on any reflective, transparent or uneven surfaces.
3. Please use dry and soft cloth to clean the product.
4. Do not disassemble the product by force.
5. Do not direct the light from the bottom of the mouse to your eyes.
6. Do not get in the rain or in the sun or nre.
7. Do not flush directly with water.

References

• Product registration | Philips

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>