Duke RFHU-22 ReadyFlex Hot Holding Cabinet User Guide
- June 8, 2024
- Duke
Table of Contents
Quick Reference
Users Guide
RFHU-34 SHOWN
MODELS
RFHU-22/RFHU-23/RFHU-24/RFHU-32
RFHU-34/RFHU-35M/RFHU-42
RFHU-22 ReadyFlex Hot Holding Cabinet
Menu Controls
CAUTION:
Please read these instructions completely before attempting operate this
equipment.
WARNING for CA residents: go to
www.dukemfg.com/prop65 for prop 65 warning
This manual is Copyright © 2022 Duke Manufacturing Co. All rights reserved.
Reproduction without written permission is prohibited. Duke is a registered
trademark of the Duke Manufacturing Co.
Basic Operations
Turn unit on.
BOOT SCREEN| Based on your unit a menu will be displayed.
i.e. 3X4 shown below.| When the unit first boots each well will contain a
preheating icon. When well reaches temp the
icon will clear and well is ready.
---|---|---
Each recipe is programmed with a “hold time”. When a well is started the color
of the well will
change to green, use this product first. When a second well of the same recipe
is started it will
change to amber use next.| When the well countdown timer expires, the timer
shows a “X”, the will turns red and an alarm will sound. Touching the well,
cancels the alarm. To cancel an unexpired timer you must press and hold.|
Three-day part menus are available to be selected on the runtime screen.
1 – Breakfast 2 – Lunch or 3 – Dinner
PHU Configurator
Several Settings are available on the RFHU. To enter the Settings menu click
on the cog icon
( ) which is found in the lower right hand corner of the runtime screen.|
Select “PHU Config”.| When selecting “PHU Config” the following screen will
appear. The PHU Config option allows the recipe mapping of each well for each
menu.
---|---|---
4. The number in the middle of each zone along with the color indicates that the individual wells are within the same temperature zone.
5. When an individual well is pressed a list of available recipes will appear available for selection within the zone, for example:
5b. Use the left and right navigation buttons to scroll through the available
recipes for this RFHU. To assign a new recipe to the well, simply select the
desired recipe.
Select to exit without making a change.
Select to save and update the RFHU Configuration.
When the user returns to the runtime screen and the well has stopped, the new
recipe name will appear where programmed.
Note: If a change is made and there is a current recipe running, the new
recipe name will not take effect until the previousreceipt has
stopped/expired or been cleared.
RFHU Recipe Editor
Selecting the “Recipe Config” option will display the list of local recipes currently stored on the Unit. These are sorted alphabetically.
Key information on each recipe is displayed on this screen view. This includes
the Recipe Name (appears on the well on the runtime screen), the Hold Time,
Cook More Time, Top Temperature and the Bottom Temperature.
Page navigation buttons can be used on each screen to navigate through each
set of recipes. The “+” icon can be used to add a new local recipe. Selecting
on an existing recipe will load the recipe in edit mode.
Each of the 9 recipe fields can be modified here.
Optional Timer Bar
Timers can be started by pressing the arrow button adjacent to and point at the corresponding wells. When the well countdown timer expires, the LED will flash RED and an alarm will sound. Pressing the arrow button for the expired well, cancels the alarm.
1. Status LED’s: Indicates status of the pan
a. Non-Illuminated – timer is inactive – no product in pan.
b. Green – timer is active – product in pan (use 1st)
c. Amber – timer is active – product in pan (use next)
d. Non-Illuminated – timer active – product in pan (use later)
e. Flashing Green – cook warning time reached (cook more product)
f. Flashing Red – product is expired (discard)
Duke Manufacturing Co.
2305 N. Broadway
St. Louis, MO 63102
Phone: 314-231-1130
Toll Free: 1-800-735-3853
Fax: 314-231-5074
www.dukemfg.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>