Editors Keys WBL-XX Backlit Wireless Keyboard User Guide

WBL-XX Backlit Wireless Keyboard
User Guide

Packaging Contents

Editors Keys Keyboard Charging Cable User Guide

Keyboard Specifications

5 hours (with backlight)
Charging time| 4 hours
Keyboard dimensions| 4268 x 113.4 x 10.65 (mm)
Compatibility systems| Windows, Android, MacOS & iOS

Your New Keyboard

• Power Switch ( On / Off )
  Turns the keyboard on and off

• Power Indicator Light ‘
  Located at the top right of the keyboard
  Red Flash | Low Charge Red | Charging Green | Fully Charged

• Pairing Indicators
  Located on each Bluetooth Key
  Flashing White | Searching for devices
  Solid White ( 3 Secs) | Bluetooth channel is connected to a device

Set Up & Pairing

Thank you so much for choosing Editors Keys. We know you can’t wait to start using your new keyboard so well keep this guide as small as possible. Follow the simple  instructions below to get up and running.

•   Turn On Your Keyboard
  Flick the switch at the back right hand side of the keyboard – the power indicator should light up for around 3 seconds,

• Activate Bluetooth Channel
  Press and hold the Bluetooth 1 key until the keys white indicator light begins to quickly flash. The keyboard is now searching for available devices to connect to.

• Connect First Device
  Head to the Bluetooth settings of your first/preferred device and look for the name ‘Bluetooth Keyboard! and click to connect. Once successfully paired the keys light  should stop flashing and briefly show as solid white before turning off.

•   Set Keyboard Configuration
  Once paired you may be prompted to select a specific language/ configuration. Make sure you select the language that matches the layout of your keyboard.

Pairing Multiple Devices

lf you’d like to pair your keyboard with a second or third device simply follow the previous instructions using the Bluetooth 2 and then Bluetooth 3 buttons instead.

• Hold To Search
  Hold down the Bluetooth 2 key until it flashes, then pair the keyboard to your second device. The light will then stop flashing and briefly show as solid white before turning off .

• Repeat and Complete
  Repeat this step for your third device using the Bluetooth 3 key.

Notes For General Usage

• One Device At A Time
  Three devices can be connected simultaneously for the ease of switching between devices but you can only type via one channel a ta time .

• Switching Between Devices
  Simply hit the Bluetooth channel key associated with a certain device to instantly connect the keyboard to that channel. Ensure the device and its Bluetooth are both switched on.

• Pairing Mode
  When in pairing mode if you d o not p air to a new device within three minutes the keyboard will stop connecting.

Key Functions

| Mac OS| PC| PC (+fn)
---|---|---|---
F1 | Mute| Mute| F1
F2 | Volume Down| Volume Down| F2
F3 | Volume Up| Volume Up| F3
F4 | Track Back| Track Back| F
F5 | Play/Pause| Play/Pause| F
F6 | Track Fwd| Track Fwd| F
F7| Brightness Down| Brightness Down| F7
F8| Brightness Up| Brightness Up| F8
F9 I| Select All| Select All| F9
F10 | Copy| Copy| F10
F11 | Paste| Paste| F11
F12 | Cut| Cut| F12
| Channel 1| Channel 1| N/A
| Channel 2| Channel 2| N/A
| Channel 3| Channel 3| N/A

Let There Be Light!

Once a device, or multiple devices, are connected you can enable and alter your keyboards backlighting.

• Locate Backlight Key
  Your backlight key will be next to your right Control (or Ctrl) key and will display the icon below.

• 1Tap
  Hitting the key once will activate your backlighting.

• 2Taps
  Hitting the key twice will increase its brightness.

• 3 Taps
  Hitting the key three times will increase brightness further,

• 4 Taps
  Hitting the key four times will deactivate the backlight.

• Energy Saving Mode
  If idle for 30 minutes or more your keyboard will enter energy saving mode. To reactivate your keyboard simply hit any key and wait a few seconds for it to wake up,

Keep it Charged.

 lf your indicator light is flashing red then it’s time to charge the keyboard using the cable provided. Once on charge the light will change to solid red and then eventually to green once fully powered.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without estriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>