WUFENG WF-CW80 12V Wireless Charger Instruction Manual
- June 10, 2024
- WUFENG
Table of Contents
WUFENG WF-CW80 12V Wireless Charger
Product introduction
Thank you for your purchasing and using of this product. This product is a invisible wireless built into the table, it design with wireless charging function. Highly compatible, supporting both Apple and Android, this product is mostly installed on worktables or desks, and can be used in offices or at home, that is, charging at any time ando keeping the table.
Packaging
- Product × 1
- Instruction booklet × 1
- Double-sided adhesivex 1
- Transparent table stic‹erx1
- Round poly-magnetic sticker × 1 (optional)
Specification
- Input :12V/1.5A
- Charging power :5W, 7.5W, 10W, 15W
- Wireless charging distance: 5~25mm
- Size :080×12mm
- Input interface: DMX2.54-2Y Type-c
Installation and use
Installation
- Remove the 3M sticker film from he surface of the wireless charger. Stick the wireless charger firmly with the front side facing upwards.
- Attach the clear table sticker to the desk directly above the center of the charger (use the clear table sticker for partitions < 15mm thick, use the poly-magnetic sticker for thicknesses > 15mm). To align the table sticker with the certre of the charger, use an auxiliary positioning card, see its instructions.
- Once connected to the power supply, the phone can be charge wirelessly by placing it on the transparent table sticker/poly-magnet.
- For desktop thicknesses over 25mm, a hole can be cut for insertion. size: 080mm
Charging & Wiring Instructions
Please place your mobile phone or other electronic product in the wireless charging area of the table with the charger installed to charge it. (Electronics must be wireless charging enabled)
Attentions
- This product does not have waterproof function. It is strictly prohibited to clean the charger with wet cloth or in water, so as not to cause leakage, short circuit or other faults.
- Please do not make this product short circuit on purpose, self disassemble or throw it into the fire, to avoid the accident caused by equipment on fire or burst.
- Do not expose the charger to sunlight or moisture or rain for long periods of time and try to avoid using it in such environments.
- Please do not use charger in the closure space, to avoid bad heat dissipation cause the charger and cell phone to be perm, reduce the life of the charger and cell phone will be shortened, cause the damage, even the risk of smoke and fire. If there are abnormal smell, hot, deformed and abnormal conditions during the use of the charger, please stop using it immediately. 3. It’s normal phenomenon product and mobile phone will have slight fever during the process of wireless charging.
- Products have been tested will not occur stop charging or overheating during charging. (with the test such as Iphone, Samsung, LG, HTC, etc.)
- Please do not place metal objects in the wireless charging area.
- This product requires customized the furniture and built into this wireless charger into the furniture.
- This product only have wireless charging function, before using wireless charging function, pls confirm that your cellphone support wireless charging.
FCC warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.