X-SENSE SBS10 Base Station Motion Sensor User Manual
- June 8, 2024
- X-SENSE
Table of Contents
X-SENSE SBS10 Base Station Motion Sensor
The X-Sense home security system provides security monitoring and remote control of your home devices via the X-Sense Home Security app. As the hub of your X-Sense home security system, the base stat ion connects your devices to the X-Sense Home Security app, through which you can control your home security anywhere and anytime. Please note it is compatible with X-Sense motion sensor SMS01, entry sensor SES01, remote control SKF01.
What’s Included
-
Base Station
-
Power Adapter
Specifications
| Model | SBS10 |
|---|---|
| Max connected devices | Up to 32 sensors and 6 remote controls |
| Power supply | AC 100-240 V, 50/60 Hz or USB Type-C 5 V/2 A |
| Backup battery | 1800 mAh Li-ion battery, 12-hour power supply |
| Radio signal range | Up to 2000 m (1 14 miles, without obstruction) |
| Operating temperature range | 0-40°C (32-104°F) |
| Operating humidity | Up to 75% |
| Product size | 85 x 85 x 129 mm (3 3 x 3 3 x 5 inches) |
| Product weight | 376 g (0 8 lb) |
Sign Up
To download the X-Sense Home Security app, scan the QR code below or search for “X-Sense Home Security” in the Apple App Store or Google Play Store.
Once downloaded, create an account using a valid email address. If you already have an account with X-Sense, log in using the most recent version of the app. For proper setup, you will need a smooth, steady internet Wi-Fi connection.
If you encounter any issues during setup or operation, please refer to the “Help & Feedback” section in the app.
| 
---|---
Apple App Store| Google Play Store
Device Connection
Before you begin, make sure your router supports a 2.4 GHz Wi-Fi network and that the Bluetooth on your phone is enabled.
-
Power on the base station via the USB port; once turned on, the base station will automatically wait to connect to the router.
-
Tap Add Device in the app, scan the QR code on the bottom of the base station, then follow the in-app instruct ions to add your base station.
Note:
- To reset the base station, insert a needle or pin into the reset hole and hold down for 5 seconds. This will reset to factory default settings and remove all information. Please note that once you reset the base station, you need to add and set up the base station again by following the in-app instructions.
- The LED indicator has 4 different colored lights.
LED Color| Description
---|---
Red| An alarm has been triggered
Green| The base station is connecting to Wi-Fi
Blue| The base station is connected to Wi-Fi
Yellow| The base station is unable to connect to Wi-Fi - The button on the base station can perform the following functions.
Function| Operation
---|---
Wi-Fi connection| Press and hold the button for longer than 10 seconds until the LED indicator turns green Keep the base station powered on during this time
Alarm shutoff| Press the button to silence an alarm
Base station shutdown| Disconnect the base station from the power source, then press and hold the button until the LED indicator turns off Otherwise, the backup battery will turn on, which will affect battery life
Device Setup
Customize the base station sound and brightness level in the app to meet your personal preference. Additionally, you can create names for each sensor installed and the rooms they are installed in.
Security Modes
The X-Sense home security system has 3 modes to choose from: Disarm, Home, and Away. You can easily switch between these modes through the app or by using a remote control.
The default system settings for each mode are listed below. You can choose which sensors are armed or disarmed in each mode, as well as customize mode options for each sensor.
Disarm
The system is disarmed, and al l sensors are disabled. This mode is used when you are at home and/or want to move in and out freely.
Home
The system is armed, but sensors will not alarm by default. You can customize the sensor functions for this mode with in the app.
Away
The system is armed by default, and all sensors will alarm when activity is detected. You can control your home security and set up individual sensor settings within the app.
Delay Functions
Exit Delay
The exit delay gives you the time to leave the monitored area without
triggering an alarm when the system is armed. If the exit delay is on and if
you leave the monitored area within the set delay time, the alarm will not
sound.
Exit delay is disabled by default for each mode. You will need to set up a
delay time ranging from Oto 300 seconds within t he app.
Entry Delay
The entry delay gives you time to get inside the monitored area while t he system is armed and manually disarm the alarm. Be sure to disarm the system within the set delay time to avoid triggering an alarm.
Entry delay is disabled by default for each mode. You will need to set up a delay time ranging from Oto 300 seconds within the app.
Additional Functions
- Receive instant notifications on your phone when activity in the detected area is captured by the sensors. Make sure you allow push notifications to be sent to your phone from the app.
- Invite up to 12 trusted people to help manage your security system. Added users can arm and disarm the system but cannot change sensor settings.
Warranty
Thank you for purchasing our product. We provide a 1-year worry-free guarantee from the date of purchase. If you have any questions, please feel free to contact the dealers or distributors in your region. They will get back to you within 1-3 working days.
Environmental Protection
Waste electrical products should not be disposed of with regular household waste. Please recycle where facilities exist. Check with local authorities or retailers for recycling advice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>