KARCHER IVM 60-36-3 H Solid And Dust Vacuum Cleaner User Manual

: June 8, 2024
: Karcher

Table of Contents

KARCHER IVM 60-36-3 H Solid And Dust Vacuum Cleaner
General instructions
Intended use
Accessories and spare parts
Scope of delivery
Symbols on the device
Initial startup
Operation
Storage
Care and maintenance
Disposal
Technical data
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KARCHER IVM 60-36-3 H Solid And Dust Vacuum Cleaner

General instructions

Read these original instructions before using your device for the first time, adhere to the instructions contained therein and store them for later reference or subsequent owners.
Be sure to read the safety instructions no. 5.956-249.0 prior to the initial startup.
If the operating instructions and safety instructions are not observed, the device can be damaged and dangers could arise for users and other persons.
Notify the dealer immediately in the case of shipping damage. Safety information

Intended use

The device is intended for:

Wet and dry cleaning of floor and wall surfaces
Extraction of dry, non-flammable, deposited dusts hazardous to health; dust class H according to EN 60335-2-69
Industrial use, e.g. in storage and production areas
Any other use constitutes improper use.
The device is not approved for crane loading.
The unit is not suitable for connection to a dust-generating machine.

Environmental protection

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations. Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential threat to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish. Notes on the content materials (REACH) Current information on content materials can be found at: www.kaercher.com/ REACH

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run safely and fault-free. Information on accessories and spare parts can be found in the Service area at www.kaercher.com.
Please note

No accessories are included in the scope of delivery. The accessories must be ordered separately depending on the application.
The correct function of the device is only guaranteed by the prescribed nominal width of the suction hose (see chapter Technical data).
Spare parts and accessories are available from your dealer or from your KÄRCHER branch.

Scope of delivery

Check the contents for completeness when unpacking. In the event of shipping damage, please notify your dealer

Description of the unit

Bow handle of the dirt receptacle
Sealing plug on the dirt receptacle
Sealing plug on the filter ring
Filter ring
Lever for the filter cleaning
Pressure gauge
Suction turbine power switch
Sealing ring
filter
Filter vibrator
Mains cable
Cable hooks
Carrying handle
Suction head
Type plate
Suction head lock
Spacer
Cable clips
Push handle
Dirt receptacle
Steering roller with parking brake
Suction pipe holder
Spacer lock
Floor nozzle holder
Suction hose port on the filter ring
Suction hose port on the dirt receptacle
Chassis

Symbols on the device

The device is suitable for vacuuming dusts up to dust class H.

Nominal width of the suction hose	Maximum vacuum
DN40	15.70 kPa (157 mbar)
DN50	14.40 kPa (144 mbar)
DN70	10.00 kPa (100 mbar)

WARNING : This device contains dusts that are harmful to your health. Emptying and maintenance, including removal of the dust bag, may only be performed by appropriately trained personnel wearing suitable personal protective equipment. Do not switch on until the entire filter system has been installed and the volume flow control functionality has been checked.

Note If necessary, remove the sticker in the relevant national language from the enclosed sheet of stickers and stick it onto the unit over the German text

Initial startup

Danger from dust that is harmful to your health
Respiratory sicknesses through inhalation of dust.
Do not vacuum without correctly installed filter elements, otherwise a danger to health from increased fine dust emission is present.

Missing filter element

Damage to the suction motor
Do not vacuum without a filter element.
Bring the device into the working position.
Secure the device with the parking brakes.
Ensure that the suction head is fitted correctly.
Insert the suction hose (not included in the scope of delivery) into the selected suction connection (see chapter Selecting the suction connection).
Seal the other suction hose port tightly with the sealing plug (see chapter Closing the suction connection).
Check the filling level in the dirt receptacle (see chapter Check the dirt receptacle filling level).
Empty the dirt receptacle if necessary (see chapter Emptying the dirt receptacle).
Depending on the application, insert the dust bag or the safety filter bag before dry vacuuming (see chapter Dry vacuuming)

Selecting the suction connection

Suction hose port on the filter ring
Dry vacuuming with dust bag: Coarse dust, large quantities of suction material for a short time
The device is equipped with a dust bag, order no. 9.989-606.0 (5 pieces).
Wet vacuum cleaning
Suction hose port on the dirt receptacle
Dry vacuuming with a safety filter bag: Fine dust, continuously large amounts of suction material
The device is equipped with a dust bag with cable ties, order no. 6.904-420.0 (5 pieces).
Wet vacuum cleaning
Two suction hoses must not be connected to the vacuum cleaner at the same time.
One of the suction hose ports must be tightly closed with the sealing plug.
When using the dust bag, the lower suction hose port must be tightly closed.
When using the safety filter bag, the upper suction hose port must be tightly closed.

Operation

Danger from dust that is harmful to your health
Respiratory sicknesses through inhalation of dust.
Do not vacuum without correctly installed filter elements, otherwise a danger to health occurs from increased fine dust emission.

ATTENTION

Danger due to fine dust entering
Risk of damage to the suction motor.
Never remove the main filter element when vacuuming.

Storage

Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
Store the device indoors only.

Care and maintenance

Inadvertently starting up device, touching live components
Risk of injury, electric shock
Switch off the device before performing any work on the device.
Remove the mains plug.
Danger from dust that is harmful to your health
Respiratory sicknesses through inhalation of dust.
Wear a breathing protection mask of class P2 or higher and disposable clothing when performing maintenance work (e.g. filter change).
Inadequate filtration
Respiratory sicknesses through inhalation of dust.
The effectiveness of the filtration of the device can be tested by the test method specified in EN 60 335-2-69 22.AA.201.2.
This test must be carried out at least annually or more frequently if specified in national requirements.
If the test result is negative, repeat the test with a new filter.
Danger from dust that is harmful to your health
Respiratory sicknesses through inhalation of dust.
Safety devices providing hazard protection must be checked for correct safety-related functionality at least annually by the manufacturer or an appropriately instruction person, e.g. absence of leaks, filter damage,the functionality of the monitoring devices

Disposal

At the end of its service life, the device is to be disposed of in accordance with statutory regulations.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)

Technical data

Phase	~	1
Power frequency	Hz	50-60
Nominal power	W	3150
Maximum permissible mains grid impedance	Ω	0.195+ j0.122
---	---	---
Dimensions and weights
Typical operating weight	kg	78
Device performance data
---	---
Container capacity	l	60
Vacuum (with pressure re- lief valve)	kPa	20.4

Determined values in acc. with EN 60335-2-69

Hand-arm vibration value| m/s2| < 2.5
Uncertainty K| m/s2| 0.2
Sound pressure level LpA| dB(A)| 79
Uncertainty KpA| dB(A)| 2
Mains cable| |
Type| | H07R
| | N-F
| | 3G1.5

mm2

Part number| | 6.650-
| | 035.0
Cable length| m| 10

Declaration of Conformity

We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in circulation by us. This declaration is invalidated by any changes made to the machine that are not approved by us.

Product: Dry vacuum cleaner
Product: Wet/dry vacuum cleaner
Type: 9.989-xxx
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
2011/65/EU

Harmonised standards used

EN 60335-1
EN 60335-2-69
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN IEC 61000-3-2: 2019
EN 61000-3-3: 2013 + A1: 2019
EN 61000-3-11: 2000
EN 62233: 2008
EN IEC 63000: 2018

Declaration of Conformity (UK)

We hereby declare that the product described below complies with the relevant provisions of the following UK Regulations, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the product is modified without our prior approval.

Product: Dry vacuum cleaner
Product: Wet/dry vacuum cleaner
Type: 9.989-xxx

Currently applicable UK Regulations