NETGEAR GS324v2 24-Port Gigabit Ethernet Unmanaged Switch Installation Guide
- June 4, 2024
- NETGEAR
Table of Contents
- NETGEAR GS324v2 24-Port Gigabit Ethernet Unmanaged Switch
- Installation Guide
- Package contents
- Register the switch
- Connect the equipment
- Connect to power
- Check the status
- Power LED
- Attach the switch to a wall
- Install the switch in a rack
- Specifications
- Support and Community
- Regulatory and Legal
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NETGEAR GS324v2 24-Port Gigabit Ethernet Unmanaged Switch
Installation Guide
24-Port Gigabit Ethernet Unmanaged Switch GS324v2
Package contents
- NETGEAR 24-Port Gigabit Ethernet Unmanaged Switch Model GS324v2
- Power cord (varies by region)
- Rack-mount brackets and screws
- Wall-mount screws
- Rubber foot pads
- Installation guide
Register the switch
-
From a computer or mobile device that is connected to the Internet, visit my.netgear.com.
-
Log in to your NETGEAR account.
NOTE: If you don’t have a free NETGEAR account, you can create one. The My Products page displays. -
From the menu on the left, select Register a Product.
-
In the Serial Number field, type the serial number of your switch. The serial number is 13 digits long. It is printed on the switch label.
-
From the Date of Purchase menu, select the date that you purchased the switch.
-
Click the REGISTER button. Your switch is registered to your NETGEAR account. A confirmation email is sent to your NETGEAR account email address.
Connect the equipment
WARNING
This switch is designed for indoor use only. If you want to connect it to a
device located outdoors, the outdoor device must be properly grounded and
surge protected, and you must install an Ethernet surge protector inline
between the switch and the outdoor device. Failure to do so can damage the
switch.Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warranty information.
Connect to power
Check the status
Power LED
Port Link and Activity LED (one numbered LED for each port)
Port Speed LED (one square LED for each port)
Attach the switch to a wall
To attach the switch to a wall, you need the wall-mount screws that are supplied with the switch. These screws are 6.3 mm in diameter, 27 mm in length.
To attach the switch to a wall
- Locate the two mount holes on the bottom panel of the switch.
- Mark and drill two mounting holes in the wall where you want to mount the switch. You can mount the switch horizontally or vertically:
- Horizontally: The two mounting holes must be at a precise distance of 7.0 in. (178 mm) from each other.
- Vertically: The two mounting holes must be at a precise distance of 3.5 in. (89 mm) from each other.
- Insert the supplied anchors into the wall and tighten the supplied screws with a No. 2 Phillips screwdriver. Leave about 0.15 in. (4 mm) of each screw protruding from the wall so that you can insert the screws into the holes on the bottom panel.
Install the switch in a rack
To install the switch in a rack, you need the rack-mount brackets and screws that are supplied with the switch.
To install the switch in a rack
- Attach the supplied mounting brackets to the side of the switch. Insert the screws provided in the product package through each bracket and into the bracket mounting holes in the switch.
- Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
- Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head screws with nylon washers through each bracket and into the rack.
- Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the rack.
Specifications
Specification **Description**
Network interface RJ-45 connector for 1000BASE-T, 100BASE-T,
or 10BASE-T
Network cable Category 5e (Cat 5e) or higher rated
Ethernet cable
Ports 24
Power 100-240VAC 50/60 Hz, 0.7A
Power consumption 12W max.
Weight 2.67 lb. (1.21 kg)
Dimensions (W x D x H) 9.92 x 7.09 x 1.73 in (252 x 180
x 44 mm)
Operating temperature 32–122°F (0–50°C)
Operating humidity 10%–90% relative humidity, noncondensing
Support and Community
Visit netgear.com/support to get your questions
answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian
French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-
policy/.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions/. If you do not agree,
return the device to your place of purchase within your return period.
Do not use this device outdoors.
NETGEAR, Inc.
350 East Plumeria Drive San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD Floor 1, Building 3
University Technology Centre Curraheen Road, Cork, T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
References
- English - NETGEAR Communities
- NETGEAR - Common Account Management
- NETGEAR Support | NETGEAR
- Do I need to use a surge protector with my NETGEAR Business device? - NETGEAR Support
- NETGEAR Terms and Conditions | NETGEAR
- Download Center | Downloads and Documentation | NETGEAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>