PROGRESS LIGHTING P550126 1-LT Outdoor Pendant Instruction Manual
- June 8, 2024
- PROGRESS LIGHTING
Table of Contents
PROGRESS LIGHTING P550126 1-LT Outdoor Pendant
PACKAGE CONTENTS
PART/DESCRIPTION/QUANTITY
- A Fixture:1
- B Glass Shade:1
- C Socket Cup:1
- D Rattan Shade With Chain:1
HARDWARE CONTENTS
(not actual size)
Safety Information
- Please read and understand this entire manual before attempting to assemble, operate or install the product.
- CAUTION: Read instructions carefuly and turn electricity off at main circuit breaker panel before beginning installation.
- CAUTION : Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
- WARNING : If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
- CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missin9 or damaged, do not attempt to assemble, install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
- Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
Assembly Instructions
-
Install the chain holder (EE) onto the nipple (FF). Next, loosely thread the hex nuts (AA) onto the nipple (FF) and then thread this assembly onto the mounting strap (CC). Install this assembly to the outlet box using the mounting screws supplied with the outlet box (not included).
-
In this step, you will adjust the depth of the chain holder in relation to the canopy depth.
Take the canopy (JJ) and slip it over the chain holder (EE). You will need to adjust the chain holder so at least 1/4″ of the threaded portion is exposed through the canopy hole. This is done by adjusting the depth of the nipple (FF) on the mounting strap (CC). When the chain holder (EE) is correctly adjusted, remove the canopy (J) and tighten the top hex nut (AA) against the mounting strap (CC) and the bottom hex nut (AA) against the chain holder (EE). -
Attach the rattan shade (D) to the fixture (A) by connecting the three chain loops on the rattan shade (D) onto the three loops of the fixture body (A).
NOTE: During this step, determine the hanging length of your fixture by removing chain links (GG) and optionally cutting the electrical and ground wire to length.
Do NOT Cut electrical or ground wires until this overall length is determined. Leave AT LEAST 6 inches MINIMUM of wire past the chain holder (EE) to allow for easy connections in step 5. (Chain links can be spread open with 2 pairs of pliers. Twist the split link ends in opposite directions and close by squeezing them back together.) -
Once the hanging length is determined, open the chain link at one end of the chain (GG). Hook the open chain link (GG) onto the fixture (A). Close the chain links back together with the pliers. open the quick link (HH), attach the chain link to the other end of the chain (GG) and chain holder (EE) onto the quick link (HH). Close the quick link. You can now weave the wires through every third chain link (GG). Continue to pass the wires AND chain through the Screw collar (DD) and canopy (JJ.
-
Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect the RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box.
-
Tuck the wires into the junction box and slip the canopy (J) over the chain holder. Thread the screw collar (DD) onto the chain holder to secure the canopy tightly to the ceiling.
-
Attach the glass shade (B) to the fixture (A) using the socket cup (C) to secure it tightly. Thread the lamps (not included) into the fixture sockets. Use 60-watt MAX incandescent medium base, SBCFL or SBLED.
WARRANTY
WARRANTY AND EXCLUSIVE REMEDY: Progress products, when properly installed
and under normal conditions of use, are warranted to our customers only to be
free from defects in material and workmanship at time of shipment. All
warranty claims must be asserted within one year from date of purchase of the
subject items; thereafter, warranty claims will not be honored. Customers’
sole remedy for a warranty claim or otherwise shall be limited to repair or
replacement of the subject product if it is shown to have been defective in
material or workmanship at time of shipment. Progress’s sole and maximum
liability for a defective product shall never exceed the cost of the subject
product.
EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS
WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS OR
IMPLIED, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO THE
CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR
ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE
CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE
SUBJECT PRODUCT OR PRODUCTS. Therefore, the customer’s sole and exclusive
remedy against us for breach of the warranty, breach of contract or negligence
or strict liability, or otherwise shall be limited to repair or replacement of
the subject product at our option (excluding installation and removal charges
which shall not be our liability) or, if we choose, refund of the purchase
price. In no case does our warranty and exclusive remedy extend to anybody
other than our customers. Our customers are not authorized to extend
warranties or remedies on our behalf to anyone. Such unauthorized extensions
of warranties or remedies by the customer shall remain the customer’s
responsibility. The customer is responsible for determining the suitability of
our products for the customer’s use or resale, or for incorporating them into
objects or for applications that the customer designs, assembles, constructs,
or manufactures.
-
THANK YOU for selecting Progress Lighting
-
We can assist you with questions regarding product information, assembly, or missing parts
-
customerservice@progresslighting.com
-
8 am-8 pm (Eastern), Monday-Friday
Documents / Resources
|
PROGRESS LIGHTING P550126 1-LT Outdoor
Pendant
[pdf] Instruction Manual
P550126 1-LT Outdoor Pendant, P550126, 1-LT Outdoor Pendant, Outdoor Pendant,
Pendant
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>