PHILIPS 5996511U5 4 Inch Retrofit Recessed Downlight User Manual
- June 4, 2024
- Philips
Table of Contents
PHILIPS 5996511U5 4 Inch Retrofit Recessed Downlight
INCL
Excl
-
WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
-
WARNING – Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input ratings of the luminaire.
-
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
-
WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
-
THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION. PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE APPLICABLE AND APPROPRIATE ELECTRICAL CODES. THE INSTALLATION GUIDE DOES NOT SUPERSEDE LOCAL OR NATIONAL REGULATIONS FOR ELECTRICAL INSTALLATIONS.
-
Installers should examine all parts that are not intended to be replaced by the retrofit kit for damage and replace any damaged parts prior to installation of the retrofit kit.
-
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS or NOT FOR EMERGENCY LIGHTING
SUITABLE FOR TYPE IC OR NON-IC LUMINAIRES -
This lamp is only compatible with provided or other specified controls listed in these instructions for proper functionality. This lamp will not operate properly when connected to a standard incandescent dimmer or other off-shelf dimming controls.
Switch off the mains before starting installation.
- Step 1 – Please read and copy the serial number on the Hue downlight. You may need this number later to pair this product with the Hue Bridge.
- Step 2 – The E26 base with connector is included in the Hue Downlight package. Screw in the E26 base into the metal can, rotating it in an anti-clockwise direction in the holder.
- Step 3 – Plug the orange connector in to the base of the downlight
- Step 4 – Press the 3 springs on the downlight to push the downlight through the cut out towards the metal can. Your Hue Downlight is installed.
Switch on the mains
There are 2 ways of controlling your Hue Downlight:
-
Pair it with the Hue Bridge (sold separately) to control via the Philips Hue App for advance control such as room setup, routines, away from home control.
You can control up to 50 lights in your home with a Hue Bridge. -
You can connect via Bluetooth on the Philips Hue Bluetooth App. You can control maximum 10 lights with this.
To uninstall- switch off the mains
Apply force to pull the downlight out of the metal can.
How to get started
Signify North America Corporation 400CrossingBlvd,Suite600 Bridgewater, NJ
08807, USA Signify Canada Ltd./Signify Canada Ltée.
281 Hillmount Road, Markham, ON, Canada L6C 2S3
Questions or Comments / Questions ou commentaires :
1-800-555-0050
© 2022 Signify Holding All rights reserved
References
- Smart lighting | Philips Hue
- Control Smart Lighting with Philips Hue App | Philips Hue US
- Control Smart Lighting with Philips Hue App | Philips Hue US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>