Xtorm AXP300U Draagbaar Power Station User Manual
- June 8, 2024
- Xtorm
Table of Contents
- Specifications
- HOW TO USE THIS POWRSTATION
- Charge your device
- Recharging the Power Bank
- CHARGING FROM WALL C ARGER
- CHARGING FROM A SOLA I PANEL:
- Recharge the power bank
- Power indicator
- Included in the box
- EU DECLARATION OF CONFORMITY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Xtorm AXP300U Draagbaar Power Station
Specifications
78.000mAh Li-ion/ 281Wh
240x142x154mm
3,3kg
DC 6.5mm input port USB-C PD input Output AC 72W (26V max) 60W
** 300W (220V / 50Hz)
Output 2x DC 5.5mm port Output Car charger Output USB 60W
(12V/5A) 120W (12V/10A) 1x USB-C PD 60W (5V/3A, 9V2.22A, 12V/1.5 ) 1x USB-A QC
3.0 18W (5V.3A, 9V/2A, 12V/1.5A) 2x USB-A (5V/3.1A)
Max output:** 300W
Power cord, MC4 to DC 6.5mm converter cable, manual
Ⓐ DC 6.5mm input port: 72 (26V max)
Ⓑ Output 2x DC 5.5mm po : 60W (12V/5A)
Output Car charger: 120 (12V/10A)
Ⓒ 2x USB-A (SV/3.lA)
Ⓓ lx USB-A QC 3.0 18W (SV 3A, 9V/2A, 12V/1.5A)
Ⓔ lx In/Output USB-C PD 60 (SV/3A, 9V2.22A, 12V/1.5A)
Ⓕ Output AC 300W (220V / 5GHz)
HOW TO USE THIS POWRSTATION
- Press the button on the output you want to use For USB/DC output: Press 1 second For AC output: Press 2 seconds
- The output is working when the green light turn~ on
- You can now use this output
Tip: when not using an output. turn It off to save energy
Press the button on the output you want to use
Charge your device
Please don’t use this product with a extension cord with multiple AC outputs. A short-circuit could lead to damage.
Recharging the Power Bank
FOR USB/DC OUTPUT : Press 1 second
FOR AC OUTPUT : Press 2 seconds
The output is working when the green light turn on. you can now use this output
TIP : when not using an output , turn it off to save energy.
CHARGING FROM WALL C ARGER
Use the included AC charging adapter to connect to the 6.5mm DC input port. (max 72W) You can also connect a use a USB-C PD charger to the USB-C port. (max 60W)
CHARGING FROM A SOLA I PANEL:
Connect your Solar Panel directly to the 6.5mm DC input port. If your solar panel has an MC4 connector, please use the adapter cable that is included.
Please don’t use this product with a extension cord with multiple AC outputs. A short-circuit could lead to damage.
IMPORTANT NOTE:
When using a Solar Panel to recharge the Power Station, make sure the power
does not exceed 26V. If more power is used it can cause serious damage to the
unit.
Recharge the power bank
via the DC in just 5.5 hours.
RECHARGING THE POWER STATION
The Power Station is fully charged when the LCD display shows 100%.
when recycling this product,
please follow WEE battery recycling procedures. Contact follow local recycling
organization for more information.
Power indicator
Included in the box
EU DECLARATION OF CONFORMITY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>