ANKER A3387 USB Video Conference Bar User Manual
- June 8, 2024
- Anker
Table of Contents
ANKER A3387 USB Video Conference Bar
Important Safety Information
Read all instructions before installing or operating the product.
- Store in a cool and dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger that is not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 0°C to 40°C.
- Do not disassemble the product or make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- Do not subject the product to mechanical shock, crushing, or cutting.
- Do not short-circuit the product or let it be short-circuited by other metal objects.
- To reduce the risk of injury, close supervision is necessary when this product is used near children, or keep the device out of the reach of children.
- Do not put fingers or hands into the product.
- Do not use the device in excess of its output rating. Overloading outputs above its rating may result in a risk of fire or injury to persons.
- Do not use the device if it is damaged or modified. It may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Have servicing performed by a qualified repair person using only identical replacement parts. Servicing is required when the device has been damaged, such as
- When the power supply or cord is damaged;
- When liquid has been spilled or objects have fallen into the device
- When the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Switch off the device when not in use.
- Do not install this equipment near any heat sources or in a confined space, such as a bookcase or similar unit, and ensure it remains in a well-ventilated area.
- Only suitable for safe use in areas below 2000m above sea level.
- Protect the power supply or cord from being walked on or pinched.
- Unplug this device during lightning storms or when unused for long periods of time
WARNING
Use only power supplies / attachments / accessories specified by the manufacturer.
Indoor use only
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20cm between the radiation and your body.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite
100, Ontario, CA 91764 Telephone:
+1-800-988-7973
Notice to Canadian users
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
conditions suivantes :
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. The device can be used in portable exposure conditions. This
equipment shall be installed and operated with minimum distance 20cm between
the radiator & body.
BLUETOOTH
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners.
Additional Legal Rights for Consumers
For consumers, who are covered by consumer protection laws or regulations in
their country of purchase or, if different, their country of residence, the
benefits conferred by Anker Work’s Limited Warranty are in addition to all
rights and remedies conveyed by such consumer protection laws and regulations,
including but not limited to these additional rights.
For FAQs and more information, please visit
https://support.ankerwork.com.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Limited. All rights reserved. Anker and the Anker logo are
trademarks of Anker Innovations Limited, registered in the United States and
other countries.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>