JOY-iT SEN-GP2Y1014AU Optical Dust Sensor User Manual
- June 9, 2024
- JOY-It
Table of Contents
JOY-iT SEN-GP2Y1014AU Optical Dust Sensor
GENERAL INFORMATION
Dear customer, thank you very much for choosing our product. In following, we will introduce you to what to observe while starting up and using this product. Should you encounter any unexpected problems during use, please do not hesitate to contact us.
USAGE WITH ARDUINO
- Connection
Code example
You can download the code example here. You can execute this code with your Arduino IDE. There you can upload the code to your Arduino-with Upload. However, make sure before that under Tools Board and Port are set correctly. This code shows you with a baud rate of 9600 the output voltage of the sensor and the calculated dust density.
OTHER INFORMATION
Our information and take-back obligations according to the Electrical and Electronic Equipment Act (ElektroG)
Symbol on electrical and electronic equipment:
This crossed-out dustbin means that electrical and electronic appliances do
not belong in the household waste. You must return the old applianc-es to a
collection point.
Before handing over waste batteries and accumulators that are not en-closed by
waste equipment must be separated from it.
Return options:
As an end user, you can return your old device (which essentially fulfils the
same function as the new device purchased from us) free of charge for disposal
when you purchase a new device.
- Small appliances with no external dimensions greater than 25 cm can be disposed of in normal household quantities independently of the pur-chase of a new appliance.
- Possibility of return at our company location during opening hours: SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germa-ny
Possibility of return in your area:
We will send you a parcel stamp with which you can return the device to us
free of charge. Please contact us by email at Service@joy-it.net or by
telephone.
Information on packaging:
If you do not have suitable packaging material or do not wish to use your own,
please contact us and we will send you suitable packaging.
SUPPORT
If there are still any issues pending or problems arising after your purcha-
se, we will support you by e-mail, telephone and with our ticket support
system.
Email: service@joy-it.net
Ticket system : http://support.joy-it.net
Telephone: +49 (0)2845 9360-50 (10-17 o‘clock) For further information
please visit our website: www.joy-it.net
Published: 24.02.2022
- www.joy-it.net
- SIMAC Electronics GmbH
- Pascalstr. 8, 47506 Neukirchen-Vluyn