DIESEL DW13 Smart Watch User Manual
- June 9, 2024
- Diesel
Table of Contents
DIESEL DW13 Smart Watch
CHARGING
Connect the smartwatch to the included charger. When your device turns on automatically, tap the screen to start and choose your language. Continue charging your smartwatch during pairing and setup.
WARNING: To avoid damaging your watch, use only the supplied charger.
INPUT: 5V 0.5A Gen 6 Charger
INPUT: 5V 1.1A Do not use a USB hub or hub, USB Y-cable, multi-cell batteries, or other peripheral devices for charging.
GETTING STARTED: Turn on Bluetooth™ on your phone, then download the DieselOn app from the App Store™ or Google Play. To pair devices, open the app and follow the instructions on the screen. Once paired, the smartwatch will display an interactive tutorial.
USEFUL TIPS: Remember to turn on Bluetooth™ on your phone and keep the DieselOn app running in the background on to keep your smartwatch connected. Continue charging your smartwatch throughout the pairing process as initial setup may drain the battery.
BLOOD SATURATION MONITORING Wear the watch a little higher on your wrist and avoid pressing it against your wrist bone. Make sure the watch fits comfortably on your wrist. A strap that is fastened too tightly restricts blood circulation, while a strap that is too loose can let in other light, which disturbs the measurement. Rest your hand on a flat surface and spread your fingers apart. The bottom of the watch case should touch your skin. Keep still and avoid operating the watch during the measurement.
RESOURCES & SUPPORT
diesel.fgservices.com Connect your smartwatch to a Wi-Fi network to download updates. This may take several minutes. To learn more about the Google services available on your smartwatch, visit: support.google.com/wearos Apple and the Apple logo are trademarks of Apple Inc., registered in the US and other countries. App Store is a service mark of Apple Inc. Wear OS by Google and Google Play are trademarks of Google LLC.
CHARGE & POWER ON
Connect your smartwatch to the included charger. Once it automatically turns on, tap the screen to begin and choose your language. Keep your smartwatch charging during pairing and setup.
DOWNLOAD & PAIR
On your phone, enable Bluetooth™, then download the DieselOn app from the App Store™ or Google Play store. Open the app and follow the onscreen instructions to pair. Once paired, your smartwatch will give you an interactive tutorial.
WARNING: To avoid damage to your watch, only use with included charger.
- INPUT: 5V 0.5 A
- Gen 6 chargers INPUT: 5V 1.1 A
- Do not use a USB hub, USB splitter, USB y-cable, battery pack or other peripheral device to charge.
USEFUL TIPS
- Remember to turn on your phone’s Bluetooth™ and keep the DieselOn app running in the background to ensure your smartwatch stays connected.
- Continue to charge your smartwatch throughout the pairing process, as initial setup can drain battery life.
- Connect your smartwatch to Wi-Fi so it can download updates. These can take a few minutes.
- To learn more about the Google services on your smartwatch, visit: support.google.com/wearos
BLOOD OXYGEN TRACKING
- Wear your watch slightly higher up your arm and avoid pressing your watch against your wrist bone.
- Make sure your watch fits comfortably on your wrist. Wearing your watch too tight constricts the blood circulation while wearing it too loose may let other light in, which affects the measurement.
- Place your hand on a flat surface with your fingers resting open. The back of your watch should be in contact with your skin.
- Stay still and avoid interacting with the watch during the measurement.
To view instructions, product information and warranty, visit diesel.fgservices.com Visit diesel.fgservices.com for how-to’s, troubleshooting, frequently asked questions & more.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Wear OS by Google and Google Play are trademarks of Google LLC.