iBELL IBL WF 9816 High Speed Wall Fan User Manual
- June 9, 2024
- iBELL
Table of Contents
iBELL IBL WF 9816 High Speed Wall Fan
PARTS IDENTIFICATION
HOW TO ASSEMBLE
- Tum the nut H counterclockwise and remove it.
- Place the rear guard in the proper position.Fit the protections into the guide holes of the guard.
- Tum the nut clockwise and tighten it completely.
- Pull out tube of the shaft.
- Tighten the screw to fasten the blade.
- Attach the front guard.
OPERATION
- The speed of the fan can be controled by a digital indicating device,Pull the string the fan will start with” 1″displayed. Further pulling-the string. the fan will speed up with the digital displaying “2”or3respectively.when the device displays’0″ again the fan stops.
- To change the direction of the air flow.pysh the edge of the guard to the desired position.
- The fan will start oscillating you push the handle, and stop oscillating push the handle
PAY PARTICULAR ATTENTION TO THE FOLLOWING:
- Use only with rated Voltage.
- Do not use acids.chemicals oils.etc have been used.
GUIDE TO BETTER MAINTENANCE
- Keep dry Never be of excessive humidity and water
- Keep the fan clean. Wipe away dirt with a clean soft cloth, ordinary soap and water,wipe dry.Do not use solvents…etc gasoline or petroleum.]
WARRANTY CARD
Dear customer
Thank you for purchasing iBELL product. Your iBELL product is under warranty
in accordance with terms and conditions stated herein.
- Your units and components contained therein are warranted against defective material and workmanship for a period of 2 years from the date of purchase.
- To obtain warranty protection, notice of alleged defect must be given promptly upon discovery and warranty card must be presented along with proof of date of purchase to our service personnel at the time of service.
- The company decision on identification of the defects due to faulty/defective spareparts or faulty workmanship or misuse/abuse shall be final and you shall agree to abide by such decision.
- The defective parts/material shall be replaced with a functionally working equivalent part/material and defective part/material will become the property of the company.
LIMITATIONS OF WARRANTY
- Damage resulting from accidents, misuse, abuse, alteration, tempering or failure of the purchaser to follow the normal operating procedure outlined in user manual.
- Defect of damage due to spillage of liquids, due to insect or wrong use of electrical supply and voltage.
- Normal wear and tear, corrosion, rusting or stains.
- Scratches and damage to outer surtace areas and externally exposed units or parts that are due to normal customer use.
- Claim for damaged /missing parts after seven days from the original date of purchase
- It any part or parts ot the unit are replaced with a part or parts not supplied or approved by company or unit has been dismantled or repaired by any person other than authorized technician.
- Product which has serial number removed or tampered
- If the warranty card is being altered, defaced or erased in any manner whatsoever.
- To obtain service, the product must be sent through freight prepaid to iBELL Service Center
CUSTOMER CARE CENTER
For any query or concerns related to the after sales service, you may please contact us on the number or email mentioned below
- Tel: 0484-2922600/2620012
- 1800 120 555 999
- E-mail: service@ibellsworld.com
- Web: www.ibellstore.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>