VECTOR OPTICS MPR-V5 First Focal Plane Riflescope Illuminated User Manual
- June 9, 2024
- VECTOR OPTICS
Table of Contents
MPR-V5 First Focal Plane Riflescope Illuminated
User Manual
MPR-V5 First Focal Plane Riflescope Illuminated
Instruction for Vector Optics Veyron IR Scope
WARNING: NEVER LOOK AT THE SUN THROUGH THE SCOPE (OR ANY OTHER OPTICAL
INSTRU-MENT). IT MAY PERMANENTLY DAMAGE YOUR EYES.
EYEPIECE FOCUSING
The eyepiece Is designed to provide a precise fast focus at certain eye
relief. The eyepiece will focus faster than your eye can compensate for any
inaccuracy in your adjustment.
MOUNTING
The scope is installed on the gun by means of a pair of the weaver or dovetail
mount rings. Use a qualified mount with a base designed to fit your particular
rifle. The scope shall be mounted as low as possible without touching either
the barrel or the receiver. For safety reasons, allow at least 3 inches of
clearance between the scope and your eyes when shooting. Slide scope forward
or backward to acquire the proper eye relief that allows you to see the full
field of view. Rotate the scope in the rings that the vertical crosshair is
vertical and the horizontal crosshair Is horizontal. Then tighten all screws
to fix the scope &mly on the rifle. Don’t exceed 16 inches/pounds of torque on
the ring’s screws.
ZEROING
Veyron scope features finger-adjustable audible click elevation and windage
adjustments. The elevation is the vertical (up-and-down) adjustment, usually
on the top of the scope. Windage is the horizontal (left-to-right) adjustment
usually on the right of the scope. The scope feature 1/10 MIIL windage and
elevation adjustment with audible clicks, meaning that 1 dick moves the point
of impact 0110 MIL at 100 yards.
With the scope mounted, rest the firearm onto a solid support and aim at a
target 100 yards away. Slowly shoot a small3 to 5 round test group onto your
target. Adjust windage & elevation screws In the direction you want to move
the bullet impact. Each click of adjustment moves the point of impact. Shoot
another 3 to 5 round test group. Repeat until you are satisfied with the point
of aim.
TURNING ON & ADJUSTING THE BRIGHTNESS LEVEL
Located on the upper of the scope ocular lens, controls the reticle
illumination. There are 6 brightness levels red illumination for the Veyron
scope. Turn the illumination knob switch to activate the scope. The 1st level
is the weakest and the 6th level is the brightest.
SIDE FOCUS PARALLAX CORRECTION
Parallax is a condition that occurs when the image of the target is not
focused precisely on the reticle plane. Parallax is visible as an apparent
movement between the reticle and the target. This side-wheel parallax is
designed for permission of precise focusing. while simultaneously readjusting
the parallax-free distance, for any range from 10 yards to infinity. One can
look through the scope and turn the side focus ring until the target, at
whatever range, is sharply focused. This feature makes the highly accurate
sidewinder range of scopes ideal for both hunting and target purposes.
BATTERY EXCHANGE
Your scope illumination is powered by 1 piece of the CR2032 button battery.
Should the illumination grow dim or not turn on, you will need to exchange the
battery. To exchange the battery, use the proper tool to release the battery
compartment cover. Remove the used battery, insert the new one. Screw on the
cover again.
SEALED, WATERPROOF AND FOGPROOF
The scope is nitrogen-purged to remove any vestige of internal moisture, also
has an 0-ring to prevent the entry of dust or moisture.
MAINTENANCE
Your scope, though amazingly tough, is a precision instrument that deserves reasonable cautious care.
- When cleaning the lens, first blow away any dirt and dust, or use a soft lens brush.
- Fingerprints and lubricants can be wiped off with lens tissue, or soft clean cotton cloth, moistened with lens cleaning fluid.
- All moving parts of the scope are permanently lubricated. Do not try to lubricate them.
- No maintenance is needed on the scope’s outer surface, except to occasionally wipe off dirt or fingerprints with a soft cloth.
- Use lens covers whenever convenient.
STORAGE
Avoid storing the scope in hot places, such as the passenger compartments of
vehicles on hot days. The high temperatures could adversely affect the
lubricants and sealants. A vehicle’s trunk, a gun cabinet, or a closet is
preferable. Never leave the scope where direct sunlight can enter either the
objective lens.
For more details please visit our website:
WWW.VECTOROPTICS.COM
VECTOR OPTICS
MPR-V5 Reticle Pattern
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>