dyson Airwrap Complete Hair Styler User Manual
- June 9, 2024
- dyson
Table of Contents
dyson airwrap logo
User manual
In the box
Some attachments may not be included.
You can buy additional attachments at
www.dyson.com/mynewairwrap
Getting started
LED
Clean the filter.
See the ‘Regular filter maintenance’ section for details.
If the red LED lights, and the filter has already been cleaned, contact the
Dyson Helpline.
The LED lights are loacated at the bottom of the handle above the filter cage.
Using your attachments
Connecting the attachment
Turn attachment into the main body until it fits securely.
Changing attachments
To change attachment, pull down on the switch to release.
Cool touch tip
During use, the Airwrap™ barrels, Round volumising brush and Coanda smoothing
dryer will get hot. To change to another attachment, hold the tip.
Take care when handling hot attachments Hold the attachment only in the area
indicated.
Some attachments may need occasional cleaning.
For more information, go to
www.dyson.com/mynewairwrap
Pre-styling
Coanda smoothing dryer
Before curling, pre-dry the hair until almost dry.
Comes with two modes (i) drying (ii) smoothing.
Use the cool tip to switch between the two modes.
Curling
Barrels
Step 1
Take a section of hair and bring barrel towards tips. Hair will start to wrap
around barrel.
Step 2
Move styler towards head, no need to twist. Hold for 15 seconds or until dry.
Step 3
Press cold shot for 5-10 seconds to set curl. Switch off to release.
To change curl direction, rotate the cool tip.
Shaping
Smoothing brushes
Step 1
Rough-dry hair with Coanda smoothing dryer.
Step 2
Use Smoothing brush to brush from root to tip.
Tips:
For volume, face bristles outwards.
Turn brush inwards at the ends to create shape.
Smoothing
Coanda smoothing dryer
Rotate cool tip to select Smoothing mode.
Press against hair to switch airflow direction.
Step 3
Use on dry hair to hide flyaways.
Position against hair until it attracts then slowly run down to tips.
For use on dry and straight hair.
How to use the contact bar
Position contact bar against the head until you hear a click and hair
attracts.
Run from root to tip to hide flyaways.
Regular filter maintenance
The filter must be cleaned when the white LED starts flashing.
Ensure that you unplug your appliance from the mains electricity supply and
allow to cool down before cleaning your filter.
The Dyson Airwrap™ multi-styler has highly tuned technology to give
outstanding performance.
This technology needs to be kept free from dust and hair product residue.
Maintenance is required to maintain performance.
Step 1
Slide the filter cleaning brush over the cable and onto the filter cage.
Using a rotating action, clean the filter cage thoroughly.
Remove the filter cleaning brush.
Slide the filter brush onto the filter cage and rotate to clean the filter cage.
Step 2
Hold the handle of your appliance and pull the filter cage downwards, onto the
cable.
Gently pull open the filter cage and slide it off the cable.
Gently pull the filter cage downwards towards the cable.
Step 3
Wash the filter cage under a warm, running tap.
Wash the filter cage under the tap.
Step 4
Shake the filter cage to remove the majority of the excess water, then leave
to dry naturally.
Step 5
Using a rotating and up and down action, clean the filter mesh with the filter
cleaning brush until all the debris has been removed.
Do not use water or chemicals to clean the filter mesh.
Rotate filter brush around filter mesh to clean.
Step 6
Gently pull the filter cage open and slide it onto the cable.
Slide the filter cage towards the handle and twist until it snaps into
place.
Gently open the filter cage and slide the cage towards the handle, twist until it snaps into place.
SV12 JN.00000 PN.000000-00-00
00.00.00 VERSION NO.01