iHOME iBT395 Dual Alarm Clock with Bluetooth Speaker and USB Charging User Manual

iHOME iBT395 Dual Alarm Clock with Bluetooth Speaker and USB Charging User Manual

TIME SET/ALARM RESET

• Press and hold to set clock
• Use +/- to select 12/24 hr display and press Time Set to confirm
• Use +/- to set hour and press Time Set to confirm
• Use +/- to set minute and press Time Set to confirm
• Use +/- to set year and press Time Set to confirm
• Use +/- to set month and press Time Set to confirm
• Use +/- to set day and press Time Set to confirm settings
• When alarm is sounding, press to disarm and reset for next day

LIGHT ALARM

• Press and hold to set alarm
• Use +/- to set hour, press Light Alarm to confirm
• Use +/- to set minute, press Light Alarm to confirm
• Use +/- to set schedule, press Light Alarm to confirm.
  

SOUND ALARM

• Press and hold to set alarm
• Use +/- to set hour, press Sound Alarm to confirm
• Use +/- to set minute, press Sound Alarm to confirm
• Use +/- to set schedule, press Sound Alarm to confirm
• Use +/- to set ‘wake to’ sound and press Sound Alarm to confirm
• Use +/- to set volume and press Sound Alarm to confirm settings

SNOOZE/DISPLAY DIMMER

• Press to snooze alarm
• When alarm is not sounding, press to cycle through display bri_glitness settings: HI, 3, 2, LO, OFF
• Press and hold to program snooze. Use +/- to set snooze duration between 1-29 minutes

SLEEP MODE

• Press to set sleep timer
• Press repeatedly to cycle through sleep timer options: 120 min, 90 min, 60 min, 30 min, 15 min, OFF.

BLUETOOTH PAIRING/ PLAY/PAUSE

• Unit will enter pairing mode when powered ON for the first time. To manually pair, press and hold the BT Pairing Button.
• Select IHome iBT395′ on your device to connect
• Press to play/pause audio

By default, the unit can auto sync time to most iOS and Android devices when Bluetooth is connected. To toggle time sync ON/OFF, press and hold the Time Set button for 10 seconds.

REAR PANEL

*Remove battery pull tab before use!

BACKUP BATTERY COMPARTMENT

When Low Battery icon appears on display:

1. Make sure the AC adapter is connected to maintain clock settings during battery replacement.
2. Use a Phillips screwdriver to unscrew the battery compartment door.
3. Remove the exhausted battery and insert a new CR2032 battery. Replace the compartment door. Do not overtighten the screw. Keep exhausted battery away from children and dispose of properly.

FRONT PANEL/DISPLAY

WARNING:

• Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

1. Do not use this product near water.
2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
5. Only use attachments/accessories specified by the manufacturer.
6. Unplug this product during lightning storms or when unused for long periods of time.
7. Damage Requiring Service – This product should be serviced by qualified service personnel when: – Plug has been damaged. – Objects have fallen into or liquid has been spilled into the enclosure. – The unit has been exposed to rain. The unit has been dropped or the enclosure damaged. – The unit exhibits a marked change in performance or does not operate normally.
8. No naked flame sources, such as lighted candles, should be placed on this product.
9. Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com
10. This product is suitable for use in tropical and/or moderate climates.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
• Do not dispose of batteries in the household trash or fire.
• The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with minimum distance 20cm (8 inches) between the radiator & your body.

ISED Information

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

©2022 SDI Technologies, Inc.All rights reserved
Questions? Visit: www.ihome.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>